putting 02 tails in a 00
08-18-2005, 08:55 AM
#1
Supporting Maxima.org Member
Thread Starter
iTrader: (1)
Join Date: Apr 2005
Location: Estill Springs, TN
Posts: 603
putting 02 tails in a 00
what all is required to properly put 02 tails into a 00. i think you only have to have the bulb housings and then it is plug and play. please correct me if i am wrong
08-18-2005, 09:41 AM
#3
Originally Posted by icewake
what all is required to properly put 02 tails into a 00. i think you only have to have the bulb housings and then it is plug and play. please correct me if i am wrong
4 8mm nuts
Flathead screwdriver
Razor blade
Terry Cloth towel
Yes, everything is plug and play.
08-18-2005, 10:40 AM
#9
Originally Posted by remembermorriso
Make sure you get the black sticky insulation glue from nissan. Or else condesation will get in.
08-18-2005, 11:35 AM
#11
yea we know stickers add 50hp, neon lights increase boost to two bar and new tail lights make your car fly... anyways moving on.When i swapped my 02 clear tail lights for the 00 gle all red tail lights the only problem i ran into was the bulb fitment. you'll have to do some cutting and wire splicing to get the proper turn signal bulbs/reverse lights to fit. just keep this in mind.
08-18-2005, 11:55 AM
#12
Originally Posted by Kruppa
You can just put it back in and heat it up with a hairdryer. Myself and others have taken ours out like three or four times and not even heated it up most of the time and still no condensation gets in.
I swapped mine with an 01 (AESEoulchild) and it was plug n play, no extra sealant was used, no issues with bulbs, and we haven't had condensation so far.... at least, I haven't, since he's already sold his car.
08-18-2005, 12:01 PM
#13
Originally Posted by UGAd13
No one asked you 4th genner...
The all red 5.5 gen tails are sick. Trust me, I know.
sorry for the pic size, Cardomain blows.
The all red 5.5 gen tails are sick. Trust me, I know.
sorry for the pic size, Cardomain blows.
Nobody asked you either...i didn't see your name in the thread title nor did i see anyone elses...I think the threads are open to EVERYONE'S opinion.
08-18-2005, 12:20 PM
#14
Senior Member
Join Date: Apr 2004
Location: Atlanta
Posts: 1,861
Originally Posted by Iron Scimitar
Nobody asked you either...i didn't see your name in the thread title nor did i see anyone elses...I think the threads are open to EVERYONE'S opinion.
08-18-2005, 12:40 PM
#17
Originally Posted by soonerfan
well you have a white 00 and want 02 tails.
i have a black 02 and want the smoked 00 SE tails
wanna trade?
i have a black 02 and want the smoked 00 SE tails
wanna trade?
08-18-2005, 12:50 PM
#19
Originally Posted by icelandmaxima
Irish mentioned to me that you were looking for some SE tails I might be looking to trade.
08-18-2005, 01:11 PM
#20
Member
Join Date: Mar 2005
Posts: 136
Originally Posted by Kruppa
You can just put it back in and heat it up with a hairdryer. Myself and others have taken ours out like three or four times and not even heated it up most of the time and still no condensation gets in.
08-18-2005, 01:13 PM
#21
Member
Join Date: Mar 2005
Posts: 136
Originally Posted by icewake
no man, i dynoed it and it was 42whp plus 75 ft lb. tq. but anyways as long as the bulb housings are in there it is plug and play
08-18-2005, 01:33 PM
#22
Originally Posted by icelandmaxima
Irish mentioned to me that you were looking for some SE tails I might be looking to trade.
a local guy would make it even easier. wanna do it this weekend?
08-18-2005, 06:38 PM
#25
Originally Posted by Puppetmaster
And Irish mentioned to me that ya might be able to help me with baking my headlights...
Originally Posted by icelandmaxima
Irish mentioned to me that you were looking for some SE tails I might be looking to trade.
08-18-2005, 06:52 PM
#28
Supporting Maxima.org Member
iTrader: (3)
Join Date: Nov 2004
Location: Baton Rouge, LA
Posts: 5,432
Originally Posted by Puppetmaster
And Irish mentioned to me that ya might be able to help me with baking my headlights...
08-18-2005, 06:56 PM
#29
cleared is soooo played out 
....be original...go with the "double-orange" action
(actually, I will be clearing the lens eventually, but sticking with the orange running light bulbs...)
....be original...go with the "double-orange" action
(actually, I will be clearing the lens eventually, but sticking with the orange running light bulbs...)
08-18-2005, 06:59 PM
#30
Supporting Maxima.org Member
iTrader: (3)
Join Date: Nov 2004
Location: Baton Rouge, LA
Posts: 5,432
Originally Posted by irish44j
cleared is soooo played out
....be original...go with the "double-orange" action
....be original...go with the "double-orange" action
but it still looks the best on the pearl
08-19-2005, 05:32 AM
#32
Senior Member
Join Date: Apr 2004
Location: Atlanta
Posts: 1,861
Originally Posted by irish44j
cleared is soooo played out
....be original...go with the "double-orange" action
....be original...go with the "double-orange" action
I need a better hosting site for my car pics than cardomain. The damn pics won't enlarge right now.
08-19-2005, 09:43 AM
#33
Originally Posted by UGAd13
That's played out too. How 'bout a little red action?
I need a better hosting site for my car pics than cardomain. The damn pics won't enlarge right now.
I need a better hosting site for my car pics than cardomain. The damn pics won't enlarge right now.
08-19-2005, 06:16 PM
#35
Guest
Posts: n/a
08-19-2005, 06:18 PM
#36
Guest
Posts: n/a
i meant to this.... http://memimage.cardomain.net/member...111_3_full.jpg
08-19-2005, 06:19 PM
#37
Originally Posted by Puppetmaster
You are the Illegal Bulb Color ****....
reference http://frwebgate.access.gpo.gov/cgi-...2001&TYPE=TEXT
08-19-2005, 06:30 PM
#38
Supporting Maxima.org Member
iTrader: (3)
Join Date: Nov 2004
Location: Baton Rouge, LA
Posts: 5,432
Originally Posted by maxS
i meant to this.... http://memimage.cardomain.net/member...111_3_full.jpg
