![]() |
Dome/Map lights don't work?
I just bought a 03 Maxima SE/6spd, and the seller informed me that he did the LED Mod on the Dome/Map lights, he said they worked fine in the past. But yesterday I noticed they weren't working. I checked the room lamp fuse which seemed fine. Any info from peps that has experienced this? Is there a relay that could be out, and if so where is it and what is it called?
Thanks. vnt :) |
Check the fuses under the left hand side of the drivers dashboard?
|
Originally Posted by aussie983
Check the fuses under the left hand side of the drivers dashboard?
Try opening the LED assembly and see if everything is secure connection wise. However I doubt this is the problem if both the map and the dome are out. Are the courtesy (door) lamps out? If so then I'd say it's a fuse or relay. |
My bad. I must have somehow missed that when reading the post.
|
Originally Posted by Progress
He said he checked the fuse.
Try opening the LED assembly and see if everything is secure connection wise. However I doubt this is the problem if both the map and the dome are out. Are the courtesy (door) lamps out? If so then I'd say it's a fuse or relay. The courtesy door lamps are still working, when I pulled the room lamp fuse out from under the fuse panel under the dash the fuse was still good. I'm lost. vnt :hmmph: |
Originally Posted by vntperformance
The courtesy door lamps are still working, when I pulled the room lamp fuse out from under the fuse panel under the dash the fuse was still good. I'm lost.
vnt :hmmph: |
Originally Posted by Progress
That rules out the fuse. Check the assemblies and see if all the leads are connected.
Yea, i'll do that...what a PITA just for some damn dome lights. vnt :slant: |
| All times are GMT -7. The time now is 11:02 PM. |
© 2026 MH Sub I, LLC dba Internet Brands