Hey guys whats up i was wondering if your motostorm udp actually "Slid right on" Or if you had to sand it down. Because the motostorm instructions said that it should slide right on and you should NEVER force the pulley on, so i sanded it down with a thick grit sand paper, then moved to a finer grit, then finaly to a emory pad. and i also used anti seize on the inner bore of the pulley as well. ANd it slides right in. Im just curious if im the only one that ever had to do this.

 

I had to sand mine down too. Still snug fit. Should be a treat when I remove it.