5th Generation Maxima (2000-2003) Learn more about the 5th Generation Maxima, including the VQ30DE-K and VQ35DE engines.

code P0171

Thread Tools
 
Search this Thread
 
Old Nov 28, 2006 | 05:41 AM
  #1  
MaxxSpd2k1's Avatar
Thread Starter
Member
 
Joined: Apr 2004
Posts: 87
code P0171

I got this code pulled from auto zone yesterday bc my ses light was on and i think this is an o2 sensor problem i was just wondering if the maxima has 2 of them by the way i have a 2001 maxima se. Thanks in advance...
Old Nov 28, 2006 | 06:24 AM
  #2  
Bborges's Avatar
Supporting Maxima.org Member
iTrader: (1)
 
Joined: Mar 2005
Posts: 546
From: CT
Dunno if codes from diff manufactures are the same.. but 0171 for ford Zetec is MAF all the way. And if you tell me you have an aftermarket cone filter great chances it is your maf.


just wait for another reply.


Later
Old Nov 28, 2006 | 08:27 AM
  #3  
MaxxSpd2k1's Avatar
Thread Starter
Member
 
Joined: Apr 2004
Posts: 87
No aftermarket cone the motor is stock the reaseon iam thinking its the o2 sensor is bc i do get a weird smell comming from the exhaust..
Old Nov 28, 2006 | 08:39 AM
  #4  
OC guy's Avatar
2002 maxima se
iTrader: (7)
 
Joined: Apr 2006
Posts: 1,081
From: BUENA PARK, CA (orange county)
http://forums.maxima.org/showthread....95#post3116895
Old Nov 28, 2006 | 09:22 AM
  #5  
MaxxSpd2k1's Avatar
Thread Starter
Member
 
Joined: Apr 2004
Posts: 87
Ok so it says fuel injection system too lean could it be that i just have dirty injectors???
Old Nov 28, 2006 | 09:55 AM
  #6  
OC guy's Avatar
2002 maxima se
iTrader: (7)
 
Joined: Apr 2006
Posts: 1,081
From: BUENA PARK, CA (orange county)
i am not sure it could be bad bank 1 sensor. wait for some other peoples replies. i dont have too much knowledge about this.
Old Nov 28, 2006 | 10:11 AM
  #7  
nismo_star's Avatar
Senior Member
iTrader: (8)
 
Joined: Nov 2004
Posts: 634
From: Oakland Gardens, NY
Replace your maf
Old Nov 28, 2006 | 10:49 AM
  #8  
kanhaik's Avatar
Junior Member
 
Joined: Dec 2004
Posts: 25
Autozone often pulls only 1 code when there are multiple. I bet you also have P0174 which is the other bank running lean. MAF is really the only problem that causes both sides to run lean. If in fact you have only 1 code (needs to be tested with ODB II), then start looking at O2 sensors or exhaust leaks. The possibility of both O2 sensors being out or both ehaust pipes having a leak is slim. I replaced my MAF last week when I realized I had both codes.
Old Nov 28, 2006 | 11:07 AM
  #9  
OC guy's Avatar
2002 maxima se
iTrader: (7)
 
Joined: Apr 2006
Posts: 1,081
From: BUENA PARK, CA (orange county)
The MAF problem is common. I will never buy nissan again!
Toyota's are way better and are more dependable. since i bought the nissan i have spent around $2000 just on electronic stuff such as O2 sensors, Maf, Coils, Plugs etc. waiting for more stuf to go bad. i never had any problem with my 01 camry.
Old Nov 28, 2006 | 11:21 AM
  #10  
MaxxSpd2k1's Avatar
Thread Starter
Member
 
Joined: Apr 2004
Posts: 87
The code is only for bank 1 and its only P0171 so i think iam just going to changed the o2 sensors.. Does any one know how much they go for???
Old Nov 28, 2006 | 11:26 AM
  #11  
OC guy's Avatar
2002 maxima se
iTrader: (7)
 
Joined: Apr 2006
Posts: 1,081
From: BUENA PARK, CA (orange county)
Originally Posted by MaxxSpd2k1
The code is only for bank 1 and its only P0171 so i think iam just going to changed the o2 sensors.. Does any one know how much they go for???
around $95 with connector. $45 without connector.
get one with connector.

http://www.autopartswarehouse.com
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
maxinout93
5th Generation Maxima (2000-2003)
14
Oct 31, 2015 02:04 AM
Kyle Lee Cleveland
6th Generation Maxima (2004-2008)
1
Sep 28, 2015 09:01 PM
dshinn
General Maxima Discussion
0
Sep 26, 2015 08:07 PM
zmcneely13
4th Generation Maxima (1995-1999)
1
Sep 26, 2015 02:26 PM




All times are GMT -7. The time now is 07:22 AM.