anyone know a website where I can buy a pair of nice bright ones? I saw them on stylinconcepts.com and also autodynamic.com.

any suggestions?

 

ebay?

 

u don't have 2 post in every single forum ...

this is probably most appropriate in the FS forum ...

 

Well just to bring this thread back on topic I see you have a new profile and it looks BU-TE-FUL, how hard was it to install the neons? What did you wire them to? Did you just do a normal wire tap, I'm gueesing no cause it's mroe than 12v?

 

thank you thank you!
well to tell you the truth, its a simple wire tap to the fog lights. when i have time and when clee's not busy im going to bring my car over his place and we're going to put all my blue lights to a switch. but right now.. when fogs go on, blue neon goes on... fog goes off, blue goes off

 

they sell them like candy on ebay, they have them for every car, even neons.

 

cause there universal

 

i know its 'easy' but im gettn tired of waiting for sum1, any1, to help me run wiring into the car to put my LEDs on a switch so im juss gonna run em to the corner/signal lights..im juss wondering how exactly do i take the stock washers out? do i have to remove some of that matting stuff or do i juss push em out....? also, what color wire do i splice and tape together?
help a clueless brother out
A_T_W

 

ok i juss answered 1 of my questions....i juss have to push em really hard, bout how hard, cuz im pushn and i dont wanna break anything so i dont know how hard to push really? could i break something by pushing really hard?
A_T_W

 

To take the stock nozzles off, just use a needle-nose plier. First reach you hand and feel around the nozzle. You'll feel two tabs. You have to squeeze those two tabs and push up a little and the nozzles will pop right out.

 

How long do u usually keep the neon on? Are u afraid u will burn it out? Im asking cause i had this problem with my neons...i dont keep them on for more then 15 min at a time.

 

I have lots of neons in my car... and once, when my starter was dying, the valet thought the switch for my neons was the killswitch, so he flipped my neons on. They were the ones in the back so I didn't really notice until the next day. They had been on the previous day all day! And they still work fine.

I also have a neon mounted in my center console. That one's been there the longest. Whenever I went home from school and felt like a race, I would turn it on and it was my "race bait". If I didn't find anyone to race, it would still take me about 20 minutes to get home and I had class three days out of the week. Neon still works fine.

You shouldn't have any problems with your neons if you only turn them on for 15 minutes at a time. And they should last a while.

 

aiite coo....now i gotta find sum pliers.....what bout the wires? what color wire do i splice?
A_T_W

 

What brand do u have?

I use to run my neons on for hours, the whole entire night basically. But after i went through 3 neons, i got smart and decided that running them for long periods of time is bad. So now i play it safe with 15 min.

 

I forget the name of the neon I have on my center console. I bought it from Crutchfield. It's those crystal/diamond/whatever neons.

Then I have two Streetglow blacklights in my front footwells. And two ghetto no-name brand purple neons from Ebay in the back that is connected to a box that will make them flash to the bass.

And I don't turn them on when I'm in the car alone, except for the one on the center console. No point really, I've seen my neons already. But the one in the center, I've had since last year around October or so and it's been fine so far.

 

Doh... I really forget... I was doing my car and Toylet's car and Toylet's friend's car... all the different wires confused the hell out of me.

But for mine (I have a fourth gen), I did it like this:
Connected the two ground wires together and ran them inside the car to a switch. Then I ran a wire from the switch to the neg of the cig lighter. The power from the right, I tapped into the power wire in the right turn signal and the left to the left power turn signal.

So my LEDs only blink when I use my blinkers and I can turn them on and off whenever I wanted to.

When Toylet gets back on, I'm sure he can tell you how we wired his. His are wired to the clearance lamps so they are on all the time when he has his lights on.

 

how did u run a switch into the car???????? thats what ive been waiting for sum1 to help me w/ cuz i want to control the LEDs myself, i dont want em on ALL the time, also i wanna have more switches to play w/ too.....helppppppp
A_T_W

 

haha i just got back from stony brook. i was bored around 1 and my friend called me so we went to stony and used his food card thing, ate, and just got back.

but anyhow, i just hooked up the black to black red to red to my corner lights.. thats basically it. i will let you know about the switch, when clee has time im going to go over his place and we're gonna do a lil drilling and re-wirring

also the name of my neon is tropical illusions. i leave them on all the time at night, cause other people like seeing them.. duh haha, only turn them off when theres a cop around.

 

I have a 4th gen so I had a little hole already drill in where the clutch was supposed to go.

But on the fifth gen, I suppose all you have to do is also just drill a hole and slide that sucker in.