5th Generation Maxima (2000-2003) Learn more about the 5th Generation Maxima, including the VQ30DE-K and VQ35DE engines.

CEL =(

Thread Tools
 
Search this Thread
 
Old Nov 18, 2008 | 10:40 PM
  #1  
16blkmax's Avatar
Thread Starter
Senior Member
iTrader: (1)
 
Joined: Sep 2007
Posts: 113
From: Phx
CEL =(

So today i was late to school and i was caught on a redlight as soon as it hit green i gave it full gas didnt get to redline but i was at 6k rpm or so shifted to second then THE LIGHT came on and i just let off everything sounds fine and its running good i went to checkers and they checked and told me it was the camshaft sensor could it be false alarm or something, should i take any precautions?
Old Nov 18, 2008 | 11:34 PM
  #2  
CaTalyst.X's Avatar
Supporting Maxima.org Member
iTrader: (6)
 
Joined: Jul 2006
Posts: 489
From: Portland, OR
Have you replaced your MAF lately by chance?
Old Nov 19, 2008 | 08:18 AM
  #3  
Drockb418's Avatar
Senior Member
iTrader: (10)
 
Joined: May 2007
Posts: 1,393
From: Edmond Oklahoma
02 sensor
Old Nov 19, 2008 | 09:23 PM
  #4  
16blkmax's Avatar
Thread Starter
Senior Member
iTrader: (1)
 
Joined: Sep 2007
Posts: 113
From: Phx
no havent replaced maf and i just replace the 02 sensor(bank1 sensor2)
Old Nov 19, 2008 | 10:13 PM
  #5  
Feldman's Avatar
Senior Member
iTrader: (1)
 
Joined: Apr 2008
Posts: 1,062
From: Salt Lake City, UT
have them reset it and if she pops up again you should look further into it. If i remember correctly a malfunction of the camshaft position sensor causes a total engine shutdown...

maybe it lost signal for a second when you got way up in the rpm's which triggered the cel but not a shutdown. In the mean time you might want to do a general check of the conections
Old Nov 19, 2008 | 10:28 PM
  #6  
16blkmax's Avatar
Thread Starter
Senior Member
iTrader: (1)
 
Joined: Sep 2007
Posts: 113
From: Phx
ok thanks ill do that. so should i stop driving her hard?
Old Nov 20, 2008 | 03:17 AM
  #7  
PersianCzar's Avatar
Junior Member
 
Joined: Oct 2008
Posts: 85
From: Scottsdale, Arizona
Keep an eye out on your MAF. I had the same problem and the CEL just shut off on me also. BUT after a few weeks rpm kept shifting to second, less and less between 5k and redline. It became more pronounced and I got a P0171. So I got a MAF and bad-da-bing, bad-da-boom!!! Smooth as a whistle.

Good luck bro!!
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
jmlee44
4th Generation Maxima (1995-1999)
8
Oct 2, 2022 02:13 PM
MaxDD
4th Generation Maxima (1995-1999)
4
Sep 24, 2015 06:40 AM
homeofbacon
4th Generation Maxima (1995-1999)
8
Sep 23, 2015 07:17 PM
JoshG
4th Generation Maxima (1995-1999)
51
Sep 21, 2015 10:41 PM
ballerchris510
3rd Generation Maxima (1989-1994)
9
Sep 10, 2015 09:35 PM




All times are GMT -7. The time now is 02:44 PM.