Maxima Forums

Maxima Forums (https://maxima.org/forums/)
-   5th Generation Maxima (2000-2003) (https://maxima.org/forums/5th-generation-maxima-2000-2003-7/)
-   -   4TH Gen Snow Tires/Wheels on 5th Gen (https://maxima.org/forums/5th-generation-maxima-2000-2003/616879-4th-gen-snow-tires-wheels-5th-gen.html)

charlestek 07-09-2010 06:33 PM

4TH Gen Snow Tires/Wheels on 5th Gen
 
I've got some Blizzak snow tires mounted on 15" alloy rims that were for my '96 GLE. I just bought a 2003 GLE and am wondering if the overall diameter might be the same so I can use the snows on the 2003.

Anyone know??

charlestek 07-09-2010 06:50 PM

Just Looked at the Miata Tire Calculator
 
Just calculated the overall diameter it is 25.9 inch for the stock 2003 tires
and 25.5 inches for the 1996 snow tires. Seems like it would work.....

QNO_A32 07-09-2010 10:10 PM

the wheels might hit the caliper, but try one on.

Clashez 03-25-2011 06:49 PM

Didn't want to start a new thread so does or has any but try using the 4th gen se wheels on an 03. I got this set of wheels that i polished by hand with sand paper still need to put tires on them so does any body know if they will fit

Prophecy99 03-25-2011 07:49 PM


Originally Posted by clashez1983 (Post 7986759)
Didn't want to start a new thread so does or has any but try using the 4th gen se wheels on an 03. I got this set of wheels that i polished by hand with sand paper still need to put tires on them so does any body know if they will fit

only u will, so post your results

OnOiShNo0dl3Z 03-25-2011 08:27 PM

I had a 4th gen steelie from a GXE with a spare tire that we used on our old 4th gen maxima. I had a flat once and decided to throw that on the car (5.5 gen). It looked fine after I put it on. I drive it less than 5 feet and I could tell something was wrong.

It turns out the rotor was too big and the wheel was scraping on the rotor. Long story short, the 4th Gen 15" GXE steelie did NOT fit on my 5.5 gen.

Both of these cars were bought used, so i might not have the stock rotors on the 5.5 gen or the 4th gen might not have had the stock wheels, but i am pretty sure they were.

Stormzusmc 03-25-2011 08:43 PM

have to grind ur caliper down to use

OnOiShNo0dl3Z 03-25-2011 09:53 PM

my bad it was the caliper like storm said, not the rotor


All times are GMT -7. The time now is 10:52 PM.


© 2024 MH Sub I, LLC dba Internet Brands