i have a 5th gen , was auto . now got 5 speed trans mounted on my 5th gen from a 99 4th gen ,but having problems with cv-axcels any one know the correct axcels that i need to buy (00 or 99) axcels its non lsd .

 

The one for the 5th 5mt... Not Ur auto axle

 

Driver side axle needs to be a 5MT axle. anything from 95-01 will work. You can reuse your automatic passanger axle.

 

i just tryed a 99 drivers side and it didnt go in all the way,

passenger side i put a 00 mt axcel

 

If it was a 5MT driver's axle and it didn't go in, you're doing something wrong.

Put the axle in the hole and slowly spin it until you feel it slip into place, then after this you can give it a firm push and it will easily slip in the rest of the way.

 

ok i will try it again ty ty ty , i see that you have done this swap do you know what wires i have to wire up on the 5th gen , all i can find is ones for 4th gen . as far as the rev/lights and for the car to start up ???