VIAS plate orientation question ( searched )
06-09-2012, 02:35 PM
#1
Senior Member
Thread Starter
Join Date: Feb 2010
Location: Florida
Posts: 621
VIAS plate orientation question ( searched )
just curious, how is the plate supposed to be oriented?
Is it normally closed or normally open at low RPM?
Heres some pics
one way it is normall open letting in mass amounts of air , the second way it is blocking off the runners
and the JB Weld goes around the brass cup?
http://www.vqpower.com/v2/articles.php?article_id=21
i found a link to the repair, but it doesnt have the orientation of the plate
Is it normally closed or normally open at low RPM?
Heres some pics
one way it is normall open letting in mass amounts of air , the second way it is blocking off the runners
and the JB Weld goes around the brass cup?
http://www.vqpower.com/v2/articles.php?article_id=21
i found a link to the repair, but it doesnt have the orientation of the plate
06-09-2012, 04:06 PM
#2
Senior Member
Thread Starter
Join Date: Feb 2010
Location: Florida
Posts: 621
ok finally found something
http://forums.maxima.org/5th-generat...ientation.html
in this photo the cup has a dowel, my guess is it cant be installed incorrectly when pointing this way...
http://forums.maxima.org/5th-generat...ientation.html
in this photo the cup has a dowel, my guess is it cant be installed incorrectly when pointing this way...
Thread
Thread Starter
Forum
Replies
Last Post
hez8813
5th Generation Maxima (2000-2003)
11
03-12-2020 12:06 AM
-ReLLiK-
4th Generation Classifieds (1995-1999)
0
09-08-2015 12:02 PM