Anyone wanna race a Sentra?
Thread Starter
Newbie - Just Registered
Joined: Jan 2002
Posts: 13
Anyone wanna race a Sentra?
I'm in the Austin area on the weekends, and have raced your member Russ2kse once from a roll with bad results 
Now that I have another mod since then I'd like to see where I stand with a big bro in the Nissan family. Looking for stock or slightly modded competition here's the mods to my car:
Place Racing C/A/I
Stromung Full Catback Exhaust
Hotshot Gen 5 Header
SMC Kwik Shift Kit
I ran a 15.65@91 with intake/exhaust back last track season, I'd be interested to see where I fair against the 5th gen crowd. Any takers?
-01
Now that I have another mod since then I'd like to see where I stand with a big bro in the Nissan family. Looking for stock or slightly modded competition here's the mods to my car:Place Racing C/A/I
Stromung Full Catback Exhaust
Hotshot Gen 5 Header
SMC Kwik Shift Kit
I ran a 15.65@91 with intake/exhaust back last track season, I'd be interested to see where I fair against the 5th gen crowd. Any takers?
-01
Senior Member
Joined: Dec 2000
Posts: 620
From: Twin Cities, MN USA
Re: Anyone wanna race a Sentra?
Originally posted by 01SR20DE
I'm in the Austin area on the weekends, and have raced your member Russ2kse once from a roll with bad results Now that I have another mod since then I'd like to see where I stand with a big bro in the Nissan family. Looking for stock or slightly modded competition here's the mods to my car:
Place Racing C/A/I
Stromung Full Catback Exhaust
Hotshot Gen 5 Header
SMC Kwik Shift Kit
I ran a 15.65@91 with intake/exhaust back last track season, I'd be interested to see where I fair against the 5th gen crowd. Any takers?
-01
I'm in the Austin area on the weekends, and have raced your member Russ2kse once from a roll with bad results
Now that I have another mod since then I'd like to see where I stand with a big bro in the Nissan family. Looking for stock or slightly modded competition here's the mods to my car:Place Racing C/A/I
Stromung Full Catback Exhaust
Hotshot Gen 5 Header
SMC Kwik Shift Kit
I ran a 15.65@91 with intake/exhaust back last track season, I'd be interested to see where I fair against the 5th gen crowd. Any takers?
-01
Thread Starter
Newbie - Just Registered
Joined: Jan 2002
Posts: 13
haha, the maxima owners so sure of themselves. I wouldn't mine taking on a new 2k2 six speed or a 2k1 5 spd. Any takers in the central texas area? I should be in low low 15's to high 14's.......
-01
-01
Originally posted by 01SR20DE
haha, the maxima owners so sure of themselves. I wouldn't mine taking on a new 2k2 six speed or a 2k1 5 spd. Any takers in the central texas area? I should be in low low 15's to high 14's.......
-01
haha, the maxima owners so sure of themselves. I wouldn't mine taking on a new 2k2 six speed or a 2k1 5 spd. Any takers in the central texas area? I should be in low low 15's to high 14's.......
-01
and uh..as far as the 2k2 6speed...uh..no..just don't...
if u had a SR20DET conversion, then it's going to be close..otherwise..u're probably not gonna see high 14 timeslip unless u NOS it...
Originally posted by 01SR20DE
everyone is sooooo confident on the board, but no one steps up to the challenge? Afraid? The street and the track are two totally different animals....any takers?
-01
everyone is sooooo confident on the board, but no one steps up to the challenge? Afraid? The street and the track are two totally different animals....any takers?
-01
Thread Starter
Newbie - Just Registered
Joined: Jan 2002
Posts: 13
You have to realize, that I ran the 15.56@91 with intake and exhaust only, on street tires. I should be heading back to the track soon, my friend in a 92 mr2t cut a 15.1@91 stock, now with intake,BOV, Boost controller @ 12psi, we were dead even. Irvine, what kind of times have you ran at the track? So much talk and so little action, all I want is a couple races with any of you all.
-01
-01
an SR20DE with intake/cams/headers/ecu/exhaust will put you in low 14's.. i suggest you do that first.. you already have headers .. intake and exhaust..
so if cams and ecu are your new mods.. then you will give a stock 2k2 6spd a run for its money
so if cams and ecu are your new mods.. then you will give a stock 2k2 6spd a run for its money
Originally posted by SprintMax
an SR20DE with intake/cams/headers/ecu/exhaust will put you in low 14's.. i suggest you do that first.. you already have headers .. intake and exhaust..
so if cams and ecu are your new mods.. then you will give a stock 2k2 6spd a run for its money
an SR20DE with intake/cams/headers/ecu/exhaust will put you in low 14's.. i suggest you do that first.. you already have headers .. intake and exhaust..
so if cams and ecu are your new mods.. then you will give a stock 2k2 6spd a run for its money
Guest
Posts: n/a
Ok....
Originally posted by 01SR20DE
You have to realize, that I ran the 15.56@91 with intake and exhaust only, on street tires. I should be heading back to the track soon, my friend in a 92 mr2t cut a 15.1@91 stock, now with intake,BOV, Boost controller @ 12psi, we were dead even. Irvine, what kind of times have you ran at the track? So much talk and so little action, all I want is a couple races with any of you all.
-01
You have to realize, that I ran the 15.56@91 with intake and exhaust only, on street tires. I should be heading back to the track soon, my friend in a 92 mr2t cut a 15.1@91 stock, now with intake,BOV, Boost controller @ 12psi, we were dead even. Irvine, what kind of times have you ran at the track? So much talk and so little action, all I want is a couple races with any of you all.
-01
Why dont you start **** elsewhere, ok? Go race like normal people do - by meeting someone up at a stoplight and revvin' a few. Who tries to hook a race up on the internet?? I mean really....
Re: Ok....
Originally posted by DOHC 30 V6
Why dont you start **** elsewhere, ok? Go race like normal people do - by meeting someone up at a stoplight and revvin' a few. Who tries to hook a race up on the internet?? I mean really....
Why dont you start **** elsewhere, ok? Go race like normal people do - by meeting someone up at a stoplight and revvin' a few. Who tries to hook a race up on the internet?? I mean really....
For real now...anybody want to race the guy? I'm kind of with Jeff on this one...he was just asking.
Senior Member
Joined: Jan 2001
Posts: 1,279
i think that u should race a 2k1 5 speed...... just being fresh off the track and pulling a 14.3 @ 96mph u have no chance.... and the 2k2 has MEAN top end pull ill tell u that now!!! good luck too bad im not in the area otherwise i would make a special little visit!!! oh yeah did i mention i can launch very well so when i can u will be seeing some 14.0-14.1s maybe lower!!!
will
will
Originally posted by 01SR20DE
everyone is sooooo confident on the board, but no one steps up to the challenge? Afraid? The street and the track are two totally different animals....any takers?
-01
everyone is sooooo confident on the board, but no one steps up to the challenge? Afraid? The street and the track are two totally different animals....any takers?
-01
Cheers
DoubleA
Thread Starter
Newbie - Just Registered
Joined: Jan 2002
Posts: 13
Exactly! I'm not claiming to be the best out there all I want is a race to see where I stand against the maxima crowd. I'm not afraid to lose but it seems like everyone on here is. I see a lot of ricer logic flying around here, this car runs this xx time so since you have the same motor and less mods you will run xx time. Just give me a shot, and what happens, happens.
-01
-01
Originally posted by 01SR20DE
Exactly! I'm not claiming to be the best out there all I want is a race to see where I stand against the maxima crowd. I'm not afraid to lose but it seems like everyone on here is. I see a lot of ricer logic flying around here, this car runs this xx time so since you have the same motor and less mods you will run xx time. Just give me a shot, and what happens, happens.
-01
Exactly! I'm not claiming to be the best out there all I want is a race to see where I stand against the maxima crowd. I'm not afraid to lose but it seems like everyone on here is. I see a lot of ricer logic flying around here, this car runs this xx time so since you have the same motor and less mods you will run xx time. Just give me a shot, and what happens, happens.
-01
Supporting Maxima.org Member
Joined: Aug 2000
Posts: 604
Originally posted by MichaelAE
Just hang in there and let everybody get their first drink of the evening in them and maybe this thread will return to normal.
Just hang in there and let everybody get their first drink of the evening in them and maybe this thread will return to normal.
chances are he has a JWT ECU and CAMS.. like i said before.. that puts him low 14's..
and no 2000 - 2001 modded 5spd is going to hang with him.. no unless the car is boosted or NOS..
he is trying to sucker you guys.. kinda like a pool shark
and no 2000 - 2001 modded 5spd is going to hang with him.. no unless the car is boosted or NOS..
he is trying to sucker you guys.. kinda like a pool shark
Thread Starter
Newbie - Just Registered
Joined: Jan 2002
Posts: 13
that would be correct if JWT had actually released the cams, or even began to think about starting on the ECU! No nitrous for me, I don't have enough money for a mistake if there was one so I'm staying N/A. Why is it so hard to believe that I want to race a maxima?
-01
-01
Originally posted by 01SR20DE
that would be correct if JWT had actually released the cams, or even began to think about starting on the ECU! No nitrous for me, I don't have enough money for a mistake if there was one so I'm staying N/A. Why is it so hard to believe that I want to race a maxima?
-01
that would be correct if JWT had actually released the cams, or even began to think about starting on the ECU! No nitrous for me, I don't have enough money for a mistake if there was one so I'm staying N/A. Why is it so hard to believe that I want to race a maxima?
-01
and JUN makes cams and a host of engine mods for the SR20DE
so don't come here sandbagging
http://www.junauto.co.jp/products/index-e.html
Thread Starter
Newbie - Just Registered
Joined: Jan 2002
Posts: 13
Jun cams are out the butt expensive, and I can use the 97 ECU if I make my own adapter...which ain't gonna happen. I SWARE I AM NOT SANDBAGGING! 
Russ2kse has seen my car before my current mod (header) and can attest to the fact that I'm not hiding anything. I'm a poor college student, I can't afford cams, yet.....
-01
Russ2kse has seen my car before my current mod (header) and can attest to the fact that I'm not hiding anything. I'm a poor college student, I can't afford cams, yet.....-01
Ok, where exactly in TX are you? If you want you can meet up with use H-town folks at the Baytown Raceway this Friday. You'll have a handful of 2k2's (to my knowledge) with various mods to play with
Thread Starter
Newbie - Just Registered
Joined: Jan 2002
Posts: 13
I was hoping for someone to come check out our scene this sat. night. I would be more than happy to come to baytown, but i work fri/sat/sun every week. Are there any big Maxima meets coming up? I was going to go to the RCR one but it fell thru!
-01
-01
Where ya at? SA? Austin? D/FW?
Anyhow, doubt if anyone can make it this weekend. Seems a couple of the guys are getting their VB mod done. I, on the other hand, may be putting on the springs.
No other meet that i know off. It's usually an impromptu thing. (kinda)
Anyhow, doubt if anyone can make it this weekend. Seems a couple of the guys are getting their VB mod done. I, on the other hand, may be putting on the springs.
No other meet that i know off. It's usually an impromptu thing. (kinda)
Originally posted by 01SR20DE
I was hoping for someone to come check out our scene this sat. night. I would be more than happy to come to baytown, but i work fri/sat/sun every week. Are there any big Maxima meets coming up? I was going to go to the RCR one but it fell thru!
-01
I was hoping for someone to come check out our scene this sat. night. I would be more than happy to come to baytown, but i work fri/sat/sun every week. Are there any big Maxima meets coming up? I was going to go to the RCR one but it fell thru!
-01
