5th Generation Maxima (2000-2003) Learn more about the 5th Generation Maxima, including the VQ30DE-K and VQ35DE engines.

Ping Problems! Tried everything....

Thread Tools
 
Search this Thread
 
Old Oct 7, 2017 | 04:40 PM
  #1  
Parker Bell's Avatar
Thread Starter
Newbie - Just Registered
 
Joined: Oct 2017
Posts: 6
From: Portlandia Orygun
Ping Problems! Tried everything....

Hey people....
so my 2002 gle had a bunch of issues. Needed new plugs, o2 sensor, maf sensor, cam sensors, vias solenoid and a new set of coils, but it still pings when beginning excelleration and does it alot more when it's warmed up. I have had an oil change to 5/30 weight, added some Lucas oil treatment and I have been adding Lucas octane booster and fuel treatment also. I'm officially frustrated....
Any ideas???

Parker
Portland, Oregon
Old Oct 8, 2017 | 04:47 AM
  #2  
Child_uv_KoRn's Avatar
Bad *** Newb
iTrader: (7)
 
Joined: Jun 2006
Posts: 4,975
Did you make two accounts, then proceed to make duplicate threads?
Old Oct 8, 2017 | 10:00 AM
  #3  
maximatech12's Avatar
Senior Member
 
Joined: Apr 2016
Posts: 972
From: Florida
There's a few places in the workshop manual that cover pinging I saw when chasing a hard start issue.
Check out the EC section then go to P0325 knock sensor error code. Check the knock sensor and make sure your getting approx 2.5V DC.
​​​A small needle has to be inserted/probing into the back of the KS connection then a positive lead from a volt meter clipped on. The black lead is grounded to the metal anywhere.
With the car at idle you should get a voltage.




All times are GMT -7. The time now is 01:58 PM.