Hi everyone. I have a 02 Sentra that's swapped with a 02 VQ35DE from an 02 maxima. (The harness and ECU are also from a Maxima). While trying to get the fuel lines hooked up I have gotten a bit confused.

I need to connect what I have attached in the picture(the stock line that comes off the fuel rail with the fuel to the feeder line that runs under the car. Should I just cut this up and put a new fitting on it?

What I have:


Fuel rail:

 

best bet is to get a hose that connects to the Sentra so you have the fittings for the firewall end and take what you need to a hose shop. they can put a new hose on the fittings you need and properly crimp them.

 

You can just use a barbed fitting. That's what I did on my 2nd gen DE swap. I used fuel line clamps and thread locked them.

 

Thank you both. I ended up getting the evil energy fuel line and barb. It worked great.