5th Generation Maxima (2000-2003) Learn more about the 5th Generation Maxima, including the VQ30DE-K and VQ35DE engines.

RE: Maxima Pulling To The Right

Old Apr 5, 2002 | 09:38 AM
  #1  
SptBiz's Avatar
Thread Starter
Senior Member
 
Joined: Feb 2002
Posts: 146
RE: Maxima Pulling To The Right

Someone recently posted a question about their Maxima pulling to the right. I haven't noticed my Maxima pulling to the right but I wanted to pass on the following info on this subject. My new Accord was drifting to the right. A very gradual drift to the right but over distance enough of a drift that if I didn't correct the steering the car would have left the roadway. The dealership checked alignment which was right on. Following the alignment check the tendency to drift to the right continued. I complained again and mentioned it to the service manager. He immediately told me that all front wheel drive vehicles have this tendency to drift to the right but provided no mechanical explanation.
Old Apr 5, 2002 | 09:48 AM
  #2  
drudawg888's Avatar
Senior Member
 
Joined: Sep 2001
Posts: 557
Re: RE: Maxima Pulling To The Right

Originally posted by SptBiz
Someone recently posted a question about their Maxima pulling to the right. I haven't noticed my Maxima pulling to the right but I wanted to pass on the following info on this subject. My new Accord was drifting to the right. A very gradual drift to the right but over distance enough of a drift that if I didn't correct the steering the car would have left the roadway. The dealership checked alignment which was right on. Following the alignment check the tendency to drift to the right continued. I complained again and mentioned it to the service manager. He immediately told me that all front wheel drive vehicles have this tendency to drift to the right but provided no mechanical explanation.
don't worry about it, man.. it's the curvature of the roads. stop driving with no hands.
Old Apr 5, 2002 | 10:05 AM
  #3  
NuJerseyDrive's Avatar
Donating Maxima.org Member
iTrader: (3)
 
Joined: Oct 2000
Posts: 1,166
When I had my stocker on I also had the drifting to the right problem. Told the dealer about it and they told me about the slant in the road so I asked my friend who's a civil engineer and she agreed. Now I have Tantrums/Falken's and it's drifting to the left hard. I checked the tire pressue and it's fine. Once I have my springs installed, I'll get an alignment done. Hopefully that'll fix the problem.
Old Apr 5, 2002 | 10:44 AM
  #4  
Bulldawg's Avatar
Senior Member
iTrader: (1)
 
Joined: Mar 2002
Posts: 759
A lesson in Road Construction

I am a 3rd year Civil Engineering Major at Clemson University.
Last summer I worked construction on Interstate 85 in SC.

On a normal flat stretch of road the slope is 2.0%-2.1%(.021 feetperfoot)
In some cases it is more, depending on how much water is projected in that area.

When you go into a turn, this is known as a superelevation, because they have to bank the turns to keep you on the road(just like nascar). The slope can get up to 4%.

2.1% slope is barely enough for you to feel, but will notice your car pulling if you let off the wheel.

SO LIKE THE GUY SAID ABOVE, DON'T WORRY AND STOP DRIVING WITH NO HANDS!!
Old Apr 5, 2002 | 10:53 AM
  #5  
SptBiz's Avatar
Thread Starter
Senior Member
 
Joined: Feb 2002
Posts: 146
Originally posted by Bulldawg
A lesson in Road Construction

I am a 3rd year Civil Engineering Major at Clemson University.
Last summer I worked construction on Interstate 85 in SC.

On a normal flat stretch of road the slope is 2.0%-2.1%(.021 feetperfoot)
In some cases it is more, depending on how much water is projected in that area.

When you go into a turn, this is known as a superelevation, because they have to bank the turns to keep you on the road(just like nascar). The slope can get up to 4%.

2.1% slope is barely enough for you to feel, but will notice your car pulling if you let off the wheel.

SO LIKE THE GUY SAID ABOVE, DON'T WORRY AND STOP DRIVING WITH NO HANDS!!
The slight / gradual drifting to the right that I'm referring to occurs on straight roadway not curves. Regardless it makes sense to me that a front wheel drive vehicle would be more sensitive to roadway slopes.
Old Apr 5, 2002 | 10:56 AM
  #6  
NuJerseyDrive's Avatar
Donating Maxima.org Member
iTrader: (3)
 
Joined: Oct 2000
Posts: 1,166
Originally posted by SptBiz


The slight / gradual drifting to the right that I'm referring to occurs on straight roadway not curves. Regardless it makes sense to me that a front wheel drive vehicle would be more sensitive to roadway slopes.
On a normal flat stretch of road the slope is 2.0%-2.1%(.021 feetperfoot)
In some cases it is more, depending on how much water is projected in that area.

2.1% slope is barely enough for you to feel, but will notice your car pulling if you let off the wheel.


BTW I believe RWD cars go through the same thing.
Old Apr 5, 2002 | 11:52 AM
  #7  
THEKNITE's Avatar
Senior Member
iTrader: (1)
 
Joined: Oct 2000
Posts: 883
Double check

If not the pavement, than gotta be elignment or tire pressure. check both.
Old Apr 5, 2002 | 12:10 PM
  #8  
djmaxski's Avatar
Senior Member
 
Joined: Jan 2001
Posts: 489
I think the explanation of 2% slope applies to straight stretches of road as well as in turns, which are sometimes banked more. If the interstate was flat, it would be a 26 foot (or whatever) wide water slide... Its sloped slightly to help water run off. If your alignment is ok, does the car pull to the right only in the right lane(s) or does it go left in the left lane? If so, then its the road, not your car. I've worried about mine going left a lot, but I spend a lot of time in the left lane. In the right lane its less of an issue.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
acw
5th Generation Maxima (2000-2003)
10
Aug 13, 2015 12:50 AM
cmpowell86
6th Generation Maxima (2004-2008)
1
Aug 10, 2015 12:35 AM
kirkhilles
5th Generation Maxima (2000-2003)
2
Aug 8, 2015 10:53 AM
BassAddictJ
7th Generation Maxima (2009-2015)
5
Aug 4, 2015 11:38 AM


Thread Tools
Search this Thread

All times are GMT -7. The time now is 05:12 PM.