FL Grounding kits still for Sale (For now anyway)
04-25-2011, 02:50 PM
#1
Maxima Grounding Kit Spec
Thread Starter
iTrader: (106)
Join Date: Jul 2006
Location: Valrico, FL
Posts: 2,412
Grounding kits still for Sale (For now anyway)
As it would turn out there was a far better turn out for my "last run" sale than I was anticipating by a long shot. The result is that maybe my assessment of demand was off and everyone was looking for that "sweet spot" price. With that much being said $45.00 is not sustainable unless I am selling the kits in bulk which I can't realistically count on. I am now selling the kit for 59.00 shipped.
As long as I can keep a quota of 3 kits a month I'll keep selling at the listed price with order form if not I will only take special orders that will come to the cost of materials, shipping + $30 dollars for my time. If you want to know what this means even the least expensive of my standard kits the 5th Gen will come to $69.00 shipped. Of coarse as the orders are special you could pick out cheaper wire, omit wires or come up with our own custom configurations to cut cost but just keep in mind all of such will effect the performance of the kit in ways that are either detrimintal at best an downright unknown at worst.
Here is the order forms and all other applicable information about the kits. There is no extra charge for shipping the U.S. however, there is a $6.50 surcharge for ship to Canada and Mexico. Everyone else needed to contact me for a quote. The order form links are just below:
United States Order Form
Canada and Mexico Order Form
Application Options
4th Gen Kit: $59.00
5th Gen: $57.60
5.5 Gen Auto Kit: $59.00
5.5 Gen 6-Speed Kit: $59.00
Custom set up: $64.00
The 5th Gen kit comes with:
1 Throttle body to firewall ground
1 Battery to chassis Ground
1 Engine Block to Chassis Ground
1 Starter to chassis Ground
1 Timing Chain Cover to Chassis Ground
The 5.5 Gen kit come with:
1 Upper Intake Manifold to Firewall Ground
1 Battery to Chassis Ground
1 Engine Block to Chassis
1 Stater to Chassis Ground
1 Timing Chain Cover to Chassis Ground
4th Gen Kit comes with:
1 Air Intake to Firewall Ground
1 Battery to chassis Ground
1 Timing Chain Cover to Chassis Ground
1 Engine Block to Chassis Ground
1 Starter to Chassis Ground
All wires are made with Stinger Electronics HPM Hypertwist 4 AWG (1666 strand count). The terminal ends are heavy nickel plated copper and are wrapped in polyolefin shrink wrap. All kits come with step by step instructions that will be sent to your e-mail via PDF when the kit gets shipped out to your house.
Color Options:
Translucent Black
Crimson Red
Carbon Grey
Clear Silver
Island Blue
As for the benefits of the kit. For auto transmissions you will notice that the car is no longer resistant to downshifting. This means that the car is more responsive when punch on the gas as the transmission will respond quicker. Also when you slow down to a slow roll the car will downshift appropriately instead of staying in high gear and quickly shifting down. The shifts are also smoother and in general more "precise" feeling. Idle and high speed rev are smoother and I noticed that the power-band actually smoothed out a bit as well whereas before the kit it would seem the car was gasping post 5000 rpm it pulls a bit harder at rpm now (not a earth shattering difference but a mildly noticeable one). The car starts a little faster and stronger. The auxiliary electrical equipment like power windows, power seats move faster and lights all around are a bit brighter especially the headlights. Some people say it helps with mileage and many manufacturers of the kit say it ups horsepower
. But basically what it does is reduce power spikes so that your cars various computers can operate more efficiently hence, allowing your vehicle to operate more like new is some ways and even better than new in others. The stock grounding system was designed to be cost cutting, light weight (for gas mileage) and to deteriorate over the years in order to "convince" people they "need" new cars this kit just curbs that normal curve of deterioration.
The benefits of the kit are more pronounced on cars with high power aftermarket sound systems.
My computer is down right now so I will have limited availibility for inquires so please be patient if I do not get back to you right away.
As long as I can keep a quota of 3 kits a month I'll keep selling at the listed price with order form if not I will only take special orders that will come to the cost of materials, shipping + $30 dollars for my time. If you want to know what this means even the least expensive of my standard kits the 5th Gen will come to $69.00 shipped. Of coarse as the orders are special you could pick out cheaper wire, omit wires or come up with our own custom configurations to cut cost but just keep in mind all of such will effect the performance of the kit in ways that are either detrimintal at best an downright unknown at worst.
Here is the order forms and all other applicable information about the kits. There is no extra charge for shipping the U.S. however, there is a $6.50 surcharge for ship to Canada and Mexico. Everyone else needed to contact me for a quote. The order form links are just below:
United States Order Form
Canada and Mexico Order Form
Application Options
4th Gen Kit: $59.00
5th Gen: $57.60
5.5 Gen Auto Kit: $59.00
5.5 Gen 6-Speed Kit: $59.00
Custom set up: $64.00
The 5th Gen kit comes with:
1 Throttle body to firewall ground
1 Battery to chassis Ground
1 Engine Block to Chassis Ground
1 Starter to chassis Ground
1 Timing Chain Cover to Chassis Ground
The 5.5 Gen kit come with:
1 Upper Intake Manifold to Firewall Ground
1 Battery to Chassis Ground
1 Engine Block to Chassis
1 Stater to Chassis Ground
1 Timing Chain Cover to Chassis Ground
4th Gen Kit comes with:
1 Air Intake to Firewall Ground
1 Battery to chassis Ground
1 Timing Chain Cover to Chassis Ground
1 Engine Block to Chassis Ground
1 Starter to Chassis Ground
All wires are made with Stinger Electronics HPM Hypertwist 4 AWG (1666 strand count). The terminal ends are heavy nickel plated copper and are wrapped in polyolefin shrink wrap. All kits come with step by step instructions that will be sent to your e-mail via PDF when the kit gets shipped out to your house.
Color Options:
Translucent Black
Crimson Red
Carbon Grey
Clear Silver
Island Blue
As for the benefits of the kit. For auto transmissions you will notice that the car is no longer resistant to downshifting. This means that the car is more responsive when punch on the gas as the transmission will respond quicker. Also when you slow down to a slow roll the car will downshift appropriately instead of staying in high gear and quickly shifting down. The shifts are also smoother and in general more "precise" feeling. Idle and high speed rev are smoother and I noticed that the power-band actually smoothed out a bit as well whereas before the kit it would seem the car was gasping post 5000 rpm it pulls a bit harder at rpm now (not a earth shattering difference but a mildly noticeable one). The car starts a little faster and stronger. The auxiliary electrical equipment like power windows, power seats move faster and lights all around are a bit brighter especially the headlights. Some people say it helps with mileage and many manufacturers of the kit say it ups horsepower
. But basically what it does is reduce power spikes so that your cars various computers can operate more efficiently hence, allowing your vehicle to operate more like new is some ways and even better than new in others. The stock grounding system was designed to be cost cutting, light weight (for gas mileage) and to deteriorate over the years in order to "convince" people they "need" new cars this kit just curbs that normal curve of deterioration.The benefits of the kit are more pronounced on cars with high power aftermarket sound systems.
My computer is down right now so I will have limited availibility for inquires so please be patient if I do not get back to you right away.
Last edited by Shinjiduo; 08-01-2011 at 05:59 PM.
08-18-2011, 08:36 PM
#22
Supporting Maxima.org Member
Join Date: Jul 2005
Location: Santa Rosa, CA
Posts: 18
08-29-2011, 09:48 PM
#27
Join Date: Sep 2005
Posts: 17
Have you received your ground kit? I sent my order in about a week ago and I'm wondering how long it takes to recieve it.
08-31-2011, 12:07 AM
#28
Supporting Maxima.org Member
Join Date: Jul 2005
Location: Santa Rosa, CA
Posts: 18
Processed through Sort Facility, August 31, 2011, 1:02 am, SAN FRANCISCO, CA 94188
Processed through Sort Facility, August 29, 2011, 8:06 pm, TAMPA, FL 33605
Acceptance, August 29, 2011, 2:53 pm, VALRICO, FL 33594
Electronic Shipping Info Received, August 19, 2011
08-31-2011, 06:17 AM
#29
Join Date: Sep 2005
Posts: 17
No I havent, he added a USPS tracking number to the paypal transaction the day after I inquired but it only says it was submitted electronically... nothing was actually received and shipped until 10 days later (3 days ago) so it looks like it should be here tomorrow or the day after but it definetly took his time.
Processed through Sort Facility, August 31, 2011, 1:02 am, SAN FRANCISCO, CA 94188
Processed through Sort Facility, August 29, 2011, 8:06 pm, TAMPA, FL 33605
Acceptance, August 29, 2011, 2:53 pm, VALRICO, FL 33594
Electronic Shipping Info Received, August 19, 2011
Processed through Sort Facility, August 31, 2011, 1:02 am, SAN FRANCISCO, CA 94188
Processed through Sort Facility, August 29, 2011, 8:06 pm, TAMPA, FL 33605
Acceptance, August 29, 2011, 2:53 pm, VALRICO, FL 33594
Electronic Shipping Info Received, August 19, 2011
08-31-2011, 02:51 PM
#31
Join Date: Sep 2005
Posts: 17
08-31-2011, 07:56 PM
#32
Supporting Maxima.org Member
Join Date: Jul 2005
Location: Santa Rosa, CA
Posts: 18
No I havent, he added a USPS tracking number to the paypal transaction the day after I inquired but it only says it was submitted electronically... nothing was actually received and shipped until 10 days later (3 days ago) so it looks like it should be here tomorrow or the day after but it definetly took his time.
Processed through Sort Facility, August 31, 2011, 1:02 am, SAN FRANCISCO, CA 94188
Processed through Sort Facility, August 29, 2011, 8:06 pm, TAMPA, FL 33605
Acceptance, August 29, 2011, 2:53 pm, VALRICO, FL 33594
Electronic Shipping Info Received, August 19, 2011
Processed through Sort Facility, August 31, 2011, 1:02 am, SAN FRANCISCO, CA 94188
Processed through Sort Facility, August 29, 2011, 8:06 pm, TAMPA, FL 33605
Acceptance, August 29, 2011, 2:53 pm, VALRICO, FL 33594
Electronic Shipping Info Received, August 19, 2011
I recieved the wires today and I can say they are of very nice quality and build. So I am happy, I will installl over the weekend and report back.
The only downside was the delay on shipping but is understandable as the wires are custom built as they are ordered but I think updates would be a nice customer service touch.
PS. Altough I can probably figure out how to install them there was no instructions included with the cables or emailed PDF as promissed.
09-01-2011, 12:01 AM
#33
Join Date: Sep 2005
Posts: 17
I recieved the wires today and I can say they are of very nice quality and build. So I am happy, I will installl over the weekend and report back.
The only downside was the delay on shipping but is understandable as the wires are custom built as they are ordered but I think updates would be a nice customer service touch.
PS. Altough I can probably figure out how to install them there was no instructions included with the cables or emailed PDF as promissed.
The only downside was the delay on shipping but is understandable as the wires are custom built as they are ordered but I think updates would be a nice customer service touch.
PS. Altough I can probably figure out how to install them there was no instructions included with the cables or emailed PDF as promissed.
09-01-2011, 04:16 AM
#34
he told me before he was going to email me pics, i sent him my email and never received pics. but if you search theres a thread for grounding kit locations. do a search you'll find it, its no more than a couple of wks old
09-02-2011, 12:15 PM
#38
Join Date: Sep 2005
Posts: 17
I recieved the wires today and I can say they are of very nice quality and build. So I am happy, I will installl over the weekend and report back.
The only downside was the delay on shipping but is understandable as the wires are custom built as they are ordered but I think updates would be a nice customer service touch.
PS. Altough I can probably figure out how to install them there was no instructions included with the cables or emailed PDF as promissed.
The only downside was the delay on shipping but is understandable as the wires are custom built as they are ordered but I think updates would be a nice customer service touch.
PS. Altough I can probably figure out how to install them there was no instructions included with the cables or emailed PDF as promissed.
09-07-2011, 08:33 PM
#39
Supporting Maxima.org Member
Join Date: Jul 2005
Location: Santa Rosa, CA
Posts: 18
Grounding kit fit great came with all needed screws quality is very good, i found the instructions on his paypal page (link on top) as a pdf and everything worked great only downside was delay on shipping and communication but worth it.
09-09-2011, 11:14 AM
#40
Join Date: Sep 2005
Posts: 17
do you know any gains from the grounding kit or any better MPG?