Nismo intake for our 6th gen?
08-23-2005, 06:53 PM
#1
Senior Member
Thread Starter
Join Date: Jan 2005
Posts: 321
Nismo intake for our 6th gen?
Hey guys I was reading this little article, and it seems incredible how they get so much hp and torque out of just a CAI. Correct me if I'm wrong, but those dyno numbers read 204hp before the mod, and 232 after. Don't they need to re-calibrate the computer in order to get maximum gain? Looking at the engine bay, it looks so much like a Maxima, that maybe we could make it fit on our car. Any thoughts?
http://www.nissanperformancemag.com/.../nismo_intake/
http://www.nissanperformancemag.com/.../nismo_intake/
08-23-2005, 07:50 PM
#2
Banned
Join Date: Jan 2004
Posts: 403
Originally Posted by Wakkus_Maximus
Correct me if I'm wrong, but those dyno numbers read 204hp before the mod, and 232 after.
before after
187 hp -> 212 hp
204 lb-ft -> 232 lb-ft
"At 4800 RPM's the NISMO intake made 25.6 hp over stock and an astounding 28.11 lb ft more of torque"
and it looks like it gained 12.9 hp and 13.52 lb ft of torque at the wheels at peak
about the fitting question. I'm pretty sure intake itself will fit. but you might need to take the support bracket off and weld it back on for proper installation.
08-23-2005, 10:17 PM
#6
Originally Posted by Mystery
I remember seeing a post here about someone who had bought the nismo intake and it fit on their max.
I PM'd kenttz not too long ago to see if everything was still working out okay and he said that he has had no problems.
08-24-2005, 04:00 AM
#7
it's listed in the Mod sticky.
******Maybe upon intial install, you'll see gains, but wont the ECU recognize the different air and make adjustments accordingly?********
These mod testings need to reflect inital results and long term ones, say a month (or if anyone knows how long the ECu needs to respond.
******Maybe upon intial install, you'll see gains, but wont the ECU recognize the different air and make adjustments accordingly?********
These mod testings need to reflect inital results and long term ones, say a month (or if anyone knows how long the ECu needs to respond.
08-24-2005, 04:49 AM
#8
Going Ginsu
Join Date: Jun 2004
Posts: 228
Mike is claiming 20 minutes: http://www.nissanperformancemag.com/...fthenerds1.php
Of course it was on an Altima, but couln't have evolved drastically in a couple of years.
Of course it was on an Altima, but couln't have evolved drastically in a couple of years.
08-24-2005, 05:00 AM
#9
Originally Posted by savagecat
Mike is claiming 20 minutes: http://www.nissanperformancemag.com/...fthenerds1.php
Of course it was on an Altima, but couln't have evolved drastically in a couple of years.
Of course it was on an Altima, but couln't have evolved drastically in a couple of years.
I feel this is the heart of mod discussion, especially for intakes. b.c usually, someone says "you need a chip to force the car to accept the power of the mods."
08-24-2005, 09:12 AM
#12
Newbie just Registered
Join Date: May 2005
Location: LA/OC, CA
Posts: 2,795
Originally Posted by NismoMax80
20 minutes for the ECU to fully adjust. but it does not say if the adjustment increases performance, or make necessary adjustments to keep stock specs.
I feel this is the heart of mod discussion, especially for intakes. b.c usually, someone says "you need a chip to force the car to accept the power of the mods."
I feel this is the heart of mod discussion, especially for intakes. b.c usually, someone says "you need a chip to force the car to accept the power of the mods."
08-24-2005, 10:09 PM
#15
Banned
Join Date: Jan 2004
Posts: 403
Originally Posted by VTmaximaVT
"At 4800 RPM's the NISMO intake made 25.6 hp over stock and an astounding 28.11 lb ft more of torque"
and it looks like it gained 12.9 hp and 13.52 lb ft of torque at the wheels at peak
and it looks like it gained 12.9 hp and 13.52 lb ft of torque at the wheels at peak
tho...i think i'm getting one. I said to myself that i'm done with modding after my previous car. but, I wanted an intake so bad..., i didn't get one cuz it might start me modding the car again. also the warranty issue. but i don't think i can pass this up. i will be back with pictures and sound.
08-24-2005, 11:46 PM
#20
Banned
Join Date: Jan 2004
Posts: 403
Originally Posted by NmexMAX
I'd rather you be back with a dyno plot instead.. 
performace gain. I've intalled many intakes, aem cai, injen, cheap ebay intakes, lol. and the results were all "I think it feels faster", not "oh sh*t!!!,
it's definately faster!!!"
however, I will try to get it dynoed when I have time to visit my brother in-law's tuning shop. I wish I could get it dynoed before installation so that you guys can see the actual difference. but I don't think i can get it dynoed before installation.
anyhow, don't expect performance gain just with intake.
08-25-2005, 01:46 AM
#21
Donating Maxima.org Member
Join Date: Aug 2005
Posts: 103
Please, let's not revisit the "gains with intakes" issue! I would say it is very likely that the gains are not "as advertised". Some may even say there are "no" gains. Nevertheless, if you are looking for a Nismo intake for the 6th Gen, there is a guy on CD that just put one on. Looks pretty tight, like the Injen set-up. According to his page, he had a Stillen intake before and switched to the Nismo which takes it further away from the engine and he apparently felt "more" gains too. Anyway, here's a link to his site, it's on this page........http://www.cardomain.com/ride/510874/8.
08-25-2005, 04:26 AM
#22
Join Date: Sep 2004
Posts: 16
I Have The Nismo Cai Installed On My 6th Generation Maxima. Fits Perfectly.
i purchased it from performancenissanparts.com.
they are specifically selling and advertisting it for 2004 maxima.
noticable increase in horsepower and throttle response over my previously installed stillen high flow intake. lower DBL level than stillen.
can be installed without removing driver side front wheel although i suggest you do, take my word for it.
so far so good.
i purchased it from performancenissanparts.com.
they are specifically selling and advertisting it for 2004 maxima.
noticable increase in horsepower and throttle response over my previously installed stillen high flow intake. lower DBL level than stillen.
can be installed without removing driver side front wheel although i suggest you do, take my word for it.
so far so good.
08-25-2005, 04:31 AM
#23
Originally Posted by LHOU72662
noticable increase in horsepower and throttle response over my previously installed stillen high flow intake.
please Prove it increases HP and torque. I sure know that IF I ever do performance mods, I will dyno before and after. If no increase is found, I will take it back.
don't get me wrong, I liked the nismo CAI since a member got it months ago. but besides price, I don't feel like cleaning the filter every month and uninstalling it during the winter.
Now if someone would prove performance gains, it would go on my long term wish list.
08-25-2005, 05:42 AM
#25
Originally Posted by darrinps
Cleaning the filter every month?
08-25-2005, 09:15 AM
#26
Originally Posted by NismoMax80
CAIs are usually exposed to the road and get a lot dirtier a lot faster. you can get replacable ones ($$$) or reuseable. Worst part is constantly uninstalling it to get to the filter.
08-25-2005, 01:12 PM
#27
Nations 1st 6th Gen Turbo
iTrader: (15)
Join Date: May 2005
Location: Displaced New Yorker in Southern, MD
Posts: 10,202
Originally Posted by NismoMax80
CAIs are usually exposed to the road and get a lot dirtier a lot faster. you can get replacable ones ($$$) or reuseable. Worst part is constantly uninstalling it to get to the filter.
As for cleaning it every month, not true, mostly depends on your driving environment. I check mine monthly, however only cleaned it once in 6 months...
08-25-2005, 02:02 PM
#28
Banned
Join Date: Jan 2004
Posts: 403
I had cold air intake in my previous car, and it didn't need to be cleaned every months. it had K&N filter, K&N claimed that it needs cleaning at 50k miles. yes, 50k miles. however I cleaned it every year with K&N cleaning kit.
when i took it out for cleaning the filter wasn't that filthy.
I just bought a nismo cai on ebay. hopefully i can get it intalled next week.
when i took it out for cleaning the filter wasn't that filthy.
I just bought a nismo cai on ebay. hopefully i can get it intalled next week.
08-25-2005, 02:49 PM
#29
Newbie just Registered
Join Date: May 2005
Location: LA/OC, CA
Posts: 2,795
Originally Posted by VTmaximaVT
I had cold air intake in my previous car, and it didn't need to be cleaned every months. it had K&N filter, K&N claimed that it needs cleaning at 50k miles. yes, 50k miles. however I cleaned it every year with K&N cleaning kit.
when i took it out for cleaning the filter wasn't that filthy...
when i took it out for cleaning the filter wasn't that filthy...
08-25-2005, 03:32 PM
#30
Senior Member
Join Date: Jul 2005
Posts: 120
Originally Posted by VTmaximaVT
I had cold air intake in my previous car, and it didn't need to be cleaned every months. it had K&N filter, K&N claimed that it needs cleaning at 50k miles. yes, 50k miles. however I cleaned it every year with K&N cleaning kit.
when i took it out for cleaning the filter wasn't that filthy.
I just bought a nismo cai on ebay. hopefully i can get it intalled next week.
when i took it out for cleaning the filter wasn't that filthy.
I just bought a nismo cai on ebay. hopefully i can get it intalled next week.
HOw much did you pay if I may ask? I'm price shopping for it right now.
08-25-2005, 04:31 PM
#31
Senior Member
Join Date: Jun 2004
Posts: 951
Originally Posted by VTmaximaVT
to me, it looks like....
before after
187 hp -> 212 hp
204 lb-ft -> 232 lb-ft
"At 4800 RPM's the NISMO intake made 25.6 hp over stock and an astounding 28.11 lb ft more of torque"
and it looks like it gained 12.9 hp and 13.52 lb ft of torque at the wheels at peak
about the fitting question. I'm pretty sure intake itself will fit. but you might need to take the support bracket off and weld it back on for proper installation.
before after
187 hp -> 212 hp
204 lb-ft -> 232 lb-ft
"At 4800 RPM's the NISMO intake made 25.6 hp over stock and an astounding 28.11 lb ft more of torque"
and it looks like it gained 12.9 hp and 13.52 lb ft of torque at the wheels at peak
about the fitting question. I'm pretty sure intake itself will fit. but you might need to take the support bracket off and weld it back on for proper installation.
Not ragging on you either VTmaximaVT for the post. They must have done a dyno with the Tornado in the intake and the blow drier supercharger.....that might be the reason for the 25HP intake gain....and a few Nismo stickers.....it all adds up.
08-26-2005, 01:01 AM
#32
Banned
Join Date: Jan 2004
Posts: 403
Originally Posted by carcus
Not ragging on you either VTmaximaVT for the post. They must have done a dyno with the Tornado in the intake and the blow drier supercharger.....that might be the reason for the 25HP intake gain....and a few Nismo stickers.....it all adds up.
that was dynoed on altima SE-R, no guarantee that maxima will have
same gain. tho I expect to gain what SE-R gained since same engine base with similar hp rating will have same setup most likely.
I don't expect performance gain from an intake. I'm getting one for the acoustic pleasure.
however 25hp at 4800 rpm/13hp at peak gain is not something you can neglect. they tested AEM cold air intake on Altima 3.5SE and they gained 8.5 hp at peak.
08-26-2005, 01:14 AM
#33
Banned
Join Date: Jan 2004
Posts: 403
Originally Posted by jrzymuscle21
HOw much did you pay if I may ask? I'm price shopping for it right now.
that's the link to the item on ebay.
I paid $235 + $8 shippping, so $243 total.
looks like a salesman of a Nissan dealer in Doylestown, PA, is selling some nismo parts and nissan related parts. I was trying to contact him, but he wasn't at his desk when I called.
according to my research, it's the cheapest new nismo intake you can get on the internet.
08-29-2005, 06:34 PM
#34
http://forums.maxima.org/showthread....=1#post4280699
nismo releases the CAI for the MAXIMA!!! I know this isn't much since the Altima CAI works, but it's a start for Maxima/Nismo right?
Although it's R-Tune meaning off road purposes and not warranted.
nismo releases the CAI for the MAXIMA!!! I know this isn't much since the Altima CAI works, but it's a start for Maxima/Nismo right?
Although it's R-Tune meaning off road purposes and not warranted.
08-30-2005, 11:30 AM
#38
Originally Posted by VTmaximaVT
yeah...I just wanted to know if it's s-tune or r-tune.
"The installation of these components could also void vehicle or other Nissan warranty coverage."
