Well I finally decided to take the plung and paint the headlights. I used everybody's favority Krylon Fusion. Took some time masking the lights using an xacto knife but I love the way they came out. I will install them this weekend, then take more pics. I still might add some demon eyes. Trying to convince myslef to spend the 150.00 for them, not to mention I already have a million wires coming out of the lights with the HID fogs as well as the LED switchbacks.

 

Lookin' good man. What're demon eyes?

 

My understanding is that they aren't different than Angel Eyes (Halo Rings). It all depends on whether you're feeling naughty or nice!

 

The blacked out headlamps are sick by the way. Not removing the amber strip?

 

paint the yellow strip like a charcoal color [like giving it a tint]

 

looks great... dues and i r supposed to do this really soon

 

So the modification continues, out goes the amber reflectors in goes the clear ones that I fabricated from a piece of prismatic plastic. I have something else in the works for these lights. I will post pics one the mod is complete.

 

Damn lookin' TIGHT bro!! Love that clear strip.

 

Wow!!

It looks very veyr good!! I cant wait to see them fully complete and back on!!

 

Where did you get the "prismatic plastic" which looks EXCELLENT by the way.

Nice job.

Joshua

 

how bout i send out my lights to you and you do all that for me and ill pay you???

 

No prob, wait till I completely finish this mod, you might like what I do to it. Should complete it by weekend, just awaiting some parts.

 

That amber out is awesome!

 

Yeah, one thing after another is gettin in the way.

 

I like it . I love blacked out look.

 

that strip makes it almost look like its carbon fiber

 

Are you going to do anything with you hids while you have them apart?

 

What do you mean? I have 6K in both the mains and fogs.

 

Dues... just keep me posted...


Joe... can u make me a pair of those clear reflectors??? ill pay ya

 

Will do.

 

sweet thanks man !!! Dues and i should be doing this mod VERY soon.. Thanks... and let me know what i owe ya via PM... thanks joe!

 

A clear lens swap.

 

I don't understand the question, I 've replaced the amber reflector and as far as the directionals go I have swapped tjem out already with the LED switchbacks.

 

Theres a lens on your xenon projector that you can swap out for a clear one thatll give you more output and more color. Thats all. www.hidplanet.com/forum then you can read up on it and they can explain it a lil better.

 

thanks bro lemme kno when your ready and ill send it and ill pay thanks

 

So the modding of the lights continues. Tonight I did a rough install of my new angel eyes as well as a new modification of the side reflector. Let me know what you think and again just a rough install, nothing has been epoxied into place yet.

 

Those looks Fuc&ing siiickkk!!! i want a pair!! Props to you for doin some ridiculously awesome work. Im jealous.

 

That looks incredible Joe. Where did you get your angel eyes? And is that LED action on the side marker? Sweet as a ****!

 

angel eyes look a bit small? not sure if it was you, but you said you were going to return them?

 

Yeah I agree... They do look rather small. What about the actual kit that is selling for the Max? Or did you buy those before learning of the kit?

 

wow that DOES look sick.... cant wait to see final stuff'

 

No, that was someone else.

I can see why he said they were small. Our headlights aren't concentric circles, so it wouldn't look right putting them around the outside edge (like most lights). I see whey Umntiza chose to put them on the inside, thus making them a little small. Still a good fit though.

Joshu

 

You are using the thinline CCFL rings? Interesting choice....

Try taping the back of the rings with aluminum tape, it will block light leakage around the area.

 

freaking hawt the side of the lights look like the side of g35 lights
nice work....!

 

How did you go about testing the lights outside of the car? Did you use a DC/AC hookup?

Joshua

 

probably put + and - directly to a 12v batt.

 

Right you are.

 

Ok here's the scoop guys, I am currently working with a vendor out of New Orleans to produce CCFL angel eyes for our headlights. The ones I have installed above were just for fitment testing. I have sent them a headlight and they are now currently designing halos that will follow the shape of our lights. I am seriously considering becoming a vendor for theses guys and doing retrofits for other 6th geners. I am trying to gauge interest from other members as to if they would be intrested in this product. The retrofits will consist of the halos, painted housings, as well as the clear side markers and CCFL lighting behind them. Please let me know if interested. I will try to keep the entire cost under 250.00. Once the new halos arrive I will post pics of the finsihed product.

 

that's f* SICK !!!! anything for the 07's Joe? That'd be great and under 250 $ is worth it. let us know, post pictures when you're done installing them in your ride. Good Luck and Thanks for the effort !

 

-WoW those lights blacked out look freakin great, specially if you're having some angel eyes specially done for our headlamps. I was recently thinking about tinting or smoking my headlamps but if you get this running I'll defenetly be interested! Nice work