Y Pipe
#3
Racingline is still coming out with one, it's just been delay several times to make sure some other things got done, (strut bars, front endlinks, moving ) but they are in the works, the last sample that was used for dyno testing had one minor flaw I didn't like, was still completely functinal but still not 100% to me, so a new sample is being done, should actually be done within the week. Test fitting then production, release should be in feb some time I would hope.
#4
thanks for the update.
hey, taz; i just recieved my front endlinks and they look badass! do you have a pic of how they are installed? now how to do it but what bushing goes on what side and that good stuff? thanks again
hey, taz; i just recieved my front endlinks and they look badass! do you have a pic of how they are installed? now how to do it but what bushing goes on what side and that good stuff? thanks again
#9
#12
#13
Good gains for the $$$$$
#14
i told him a few times i would let them use my car again as the test car, but no word from him since...
im sure he is very busy working on great maxima parts for us LOL...
do u have pics of the headers you bought... not sure if the cattman ypipe will hook up w/ that application or not...
#16
#17
no smell at all... i was the first 6th gen to get it from brian... so i have one of the pipes that makes a BOV type of SWOOSHING sound at 3000krpms.... actually soudns kinda sweet... but im going to get it fixed under warranty for free from him... he honors his work!!! great guy...
Good gains for the $$$$$
Good gains for the $$$$$
Just wondering.
Thanks
#18
I don't think it's an issue because most of the readings are taken above that point in the exhaust. I'm sure someone else that knows what they're talking about can verify this.
#20
#22
I finally got around to installing my Cattman Y-pipe. I drive it around for a couple of hours and threw an SES light. But after talking to Brian, I'm about 90% sure that its a bad sensor. I'm the first to have this happen after a Cattman Y-pipe install. Can't wait to get this thing to the track.
#24
still new to the maxima and learning quick, how easy is the install of a y pipe? Can it be done with jack stands from underneath the car? any PDF files with installation instructions. does the y pipe come with the bung predrilled for the sensor?
#25
Come with O2 sensor port as well. I couldn't get my old O2 sensor off so I had to buy a new one for $100 or so. Be aware that could be the case.
#27
i jacked up my car from the center point [cross member] and put jack stands on the side. took about 30min to 1hr. i used a lot of wd-40 to help the bolts come off. install was like 10 min. i have the ce pipe from taz but same concept
#28
![Embarrassment](https://maxima.org/forums/images/smilies/redface.gif)
Thread
Thread Starter
Forum
Replies
Last Post
litch
4th Generation Maxima (1995-1999)
123
01-04-2024 07:01 PM
My Coffee
New Member Introductions
15
06-06-2017 02:01 PM