New Angel Eye Design
#85
Have you guys looked closely at the '07 light yet?
They needed something to replace the bumped cover mounted turning lights so they threw in those diagonal firing lights.
How do you guys think it would look to replace the top amber bulb with clear and mount a halo around that. I think it will look like garbage, compared to the 6.0.
Yet another slap in the face to us 6.5ers.
Joe/Igor: any thoughts............
They needed something to replace the bumped cover mounted turning lights so they threw in those diagonal firing lights.
How do you guys think it would look to replace the top amber bulb with clear and mount a halo around that. I think it will look like garbage, compared to the 6.0.
Yet another slap in the face to us 6.5ers.
Joe/Igor: any thoughts............
Man i gotta 08 max & they got nothing for it.. i was thinking about switching the amber bulb to a blue led or something but alll the work just 2 switch a bulb.. blah.. but on the other hand i think the turning "diagonal firing lights" are cool =].. a
#86
...you guys are a bit impatient it seems. I believe it took us a little bit to also get mods. They weren't readily available from the get-go. Be a bit patient and I'm sure some creative minds are thinking of a few things for you guys. You should feel proud in a way that some of us with the earlier 6 gens are using your front bumpers as a mod.
#87
...you guys are a bit impatient it seems. I believe it took us a little bit to also get mods. They weren't readily available from the get-go. Be a bit patient and I'm sure some creative minds are thinking of a few things for you guys. You should feel proud in a way that some of us with the earlier 6 gens are using your front bumpers as a mod.
#91
well i did call, but they gave me the wrong count obviously. So just wondering when these babies are gonna be sent out. They keep telling us were 8 or 9, and if that was the case we should of had atleast 10 or 11 buyers by now.
#92
Someone on the other org called Justin today, and he said they still had nine but regardless, they will be shipped out Monday.
#94
If you use your own sealant, it will evaporate moisture into the housing while it is drying.
#95
hey guys, i have a 90 gxe and the heater doesn't blow hot air? any suggestions?
you can email me too: feris18@hotmail.com
you can email me too: feris18@hotmail.com
#96
hey guys, i have a 90 gxe and the heater doesn't blow hot air? any suggestions?
you can email me too: feris18@hotmail.com
you can email me too: feris18@hotmail.com
#101
yea i hope so its just bs that i called the day b4 i ordered they had 8 some1 else said he ordered he was 9 then i ordered so that's #10 unless something changed in the addition rule book. but the chick i was talking to was kinda slow anyway i just hope they really mail them out!!!!
#105
Joes got more pics on page 1 and I put some up with instructions on page 2.
Link http://forums.maxima.org/showthread.php?t=553977&page=2
#107
This fcking sucks ! One of the rings cracked on me, completely out of nowhere. Now I installed MULTIPLE amount of angel rings for customers, so I have plenty of experience with them. I pre drilled the holes for them, at the right distance from eachother so when the rings are in place, theres no pressure on them. I place the lower ring in, as I go to place the upper ring in, the bottom one just snaps out of nowhere...
#108
This fcking sucks ! One of the rings cracked on me, completely out of nowhere. Now I installed MULTIPLE amount of angel rings for customers, so I have plenty of experience with them. I pre drilled the holes for them, at the right distance from eachother so when the rings are in place, theres no pressure on them. I place the lower ring in, as I go to place the upper ring in, the bottom one just snaps out of nowhere...
#109
Nations 1st 6th Gen Turbo
iTrader: (15)
Join Date: May 2005
Location: Displaced New Yorker in Southern, MD
Posts: 10,202
That sucks bro the kit looked great too, kind of glad mine were made thicker now!!! www.customlightz.com
#112
That sucks bro the kit looked great too, kind of glad mine were made thicker now!!! www.customlightz.com
I think I like the looks of those halo's better, they actually fit the contour of the light housing. I am afraid of what may happen to all of us that bought through the group deal when the lights get shook, vibrated from everyday driving. Especially after what happened to mine.
I think I like the looks of those halo's better, they actually fit the contour of the light housing. I am afraid of what may happen to all of us that bought through the group deal when the lights get shook, vibrated from everyday driving. Especially after what happened to mine.
#114
You're not the only one, I had mine installed in the headlight and sealed for 7 hours before installing in the car and looked and my bottom halo had broke. I had to order another one, you do not get any sympathy when dealing with the owner either. It was my fault no matter what! At least that is pretty much what they told me. Put another one in the same holes that I drilled and it is just fine. Hope you get yours resolved.
I gave them a call today, and requested for 2 rings to be mailed out, hopefully they do so, I'm guessing they're being nicer to me considering I installed about 10 of their kits on other cars (g35's), and never had a problem with them. They're actually looking for me to become their certified installed for the Tri-State area, but I dont think if I'm willing to do it, especially now that they're products break so easily.
I'll keep you guys updated, I imagined I wasn't the only one that ran into this problem.
#115
Awesome design. I like how theyre stacked and they look very clean. I bet theyd look sick in the morning when its starting to get light out. Id love to pick some up but im so cash strapped Icant for a little while. The price is right though.
#117
Heres an update...
Now, after that first ring broke, I went ahead and installed the 2nd ring on the same headlight the first ring broke on, the one that goes on top... before even calling AAC to have them ship me out the replacement ring. I do the install, the top ring sits in fine, doesn't break, seems to be good...
I wait till the next day to call up AAC, and right before I call them, I took another look at the Maxima headlight bezel with the broken ring, and noticed that the upper ring also broke ! I mean... the bezel sat on my work table after I installed the ring, and I didnt touch it after, no one did... and the ring just broke... out of no where. So I call up AAC, tell Tiff about the ringS she has to send me, she said Jeff only said one, I said... its actually 2 rings, so without any hassles, they went ahead and sent me 2 extra replacement rings.
Now this wouldn't happen to your average Joe, if I didnt explain to them how I work on headlights and know what I'm doing, they woulda just told me to go fvck myself, like they did with a dozen of other customers I know.
Other Maxima owners who got the same kit already broke theirs, and AAC doesn't wanna replace it.
I dont know if I'll be sending in my contact info to AAC, so they can send me customers... I install their sh1ty product, and then people come crying to me. I'm going to install this last 2 pairs of
Now, after that first ring broke, I went ahead and installed the 2nd ring on the same headlight the first ring broke on, the one that goes on top... before even calling AAC to have them ship me out the replacement ring. I do the install, the top ring sits in fine, doesn't break, seems to be good...
I wait till the next day to call up AAC, and right before I call them, I took another look at the Maxima headlight bezel with the broken ring, and noticed that the upper ring also broke ! I mean... the bezel sat on my work table after I installed the ring, and I didnt touch it after, no one did... and the ring just broke... out of no where. So I call up AAC, tell Tiff about the ringS she has to send me, she said Jeff only said one, I said... its actually 2 rings, so without any hassles, they went ahead and sent me 2 extra replacement rings.
Now this wouldn't happen to your average Joe, if I didnt explain to them how I work on headlights and know what I'm doing, they woulda just told me to go fvck myself, like they did with a dozen of other customers I know.
Other Maxima owners who got the same kit already broke theirs, and AAC doesn't wanna replace it.
I dont know if I'll be sending in my contact info to AAC, so they can send me customers... I install their sh1ty product, and then people come crying to me. I'm going to install this last 2 pairs of
Thread
Thread Starter
Forum
Replies
Last Post
James92SE
3rd Generation Maxima (1989-1994)
142
01-02-2024 09:23 AM
NERDJUSTBNME
8th Generation Maxima (2016-)
12
09-30-2015 03:20 PM
carid
Group Deals / Sponsors Forum
0
09-17-2015 05:00 AM