Magnaflow 14805 installed
#1
Magnaflow 14805 installed
Sup fellas, i just wanted to post some pics of the new Magnaflow 14805 mufflers i had installed last week. I finally got around to taking a few pics. Let me know what you guys think.
They have a nice little growl to them but they're not as loud as i expected. That huge stock resonator box is still on there so it's stealing some of my glory howl for now... LoL. I'm planning on getting the Cattman b-pipe which has a smaller resonator. And after talking with Brian from Cattman and a few other Org members it seems like the b-pipe would be the way to go to get that deeper growl i'm looking for. Sorry no audio clips, when i install the b-pipe i'll be posting a clip. Here are a few pics:
They have a nice little growl to them but they're not as loud as i expected. That huge stock resonator box is still on there so it's stealing some of my glory howl for now... LoL. I'm planning on getting the Cattman b-pipe which has a smaller resonator. And after talking with Brian from Cattman and a few other Org members it seems like the b-pipe would be the way to go to get that deeper growl i'm looking for. Sorry no audio clips, when i install the b-pipe i'll be posting a clip. Here are a few pics:
#5
Damn that looks very familiar Very little difference if any to my 14816. Looks really good. Welcome to the fam!! I know how you feel about the resonator. I took mine off and ended up putting it back on (for now.) That thing is a beast. I'm working on getting the b-pipe too.
The 3ft. missile living under you car
The 3ft. missile living under you car
Last edited by Gollum67; 11-03-2008 at 12:41 AM.
#6
Thanks man. You def helped me ans all the questions i has. I'm loving them now. can't wait to put on that cattman b-pipe
#15
Good setup.. ive had mine for almost 2 yrs and lovin' them still!!!!
+1 on b pipe... talk to PrjctMax... he has one for sale for a VERY fair price...
Get his Ypipe too and save $$$$$$$ u will LOVEEEEEEEEEEEEEEEE your ride...
+1 on b pipe... talk to PrjctMax... he has one for sale for a VERY fair price...
Get his Ypipe too and save $$$$$$$ u will LOVEEEEEEEEEEEEEEEE your ride...
#17
Fast, you got a audio clip of how your setup sounds with the b-pipe? I'm not looking from a loud obnoxious (ricey) sound. Something close to the FX35/G35 would be nice.
#19
Supporting Maxima.org Member
iTrader: (16)
Join Date: Nov 2004
Location: Denver, Colorado
Posts: 2,761
Looks good man. Congrats
I found this difference in the Magnaflow Mufflers
14805 Magnaflow #642-14805 2.25'' Inlet 3.5'' Dia. x 4'' Long Double Wall Straight Cut Tips
14807 Magnaflow #642-14807 2.25" Inlet, 4" Dia x 4" Long Double Wall Straight Cut Tips
14816 Double Wall Straight Cut 3.5" Diam. Tips
6.5" Tip Length ????? Veniality did you really go 6.5in lenght tips?
I found this difference in the Magnaflow Mufflers
14805 Magnaflow #642-14805 2.25'' Inlet 3.5'' Dia. x 4'' Long Double Wall Straight Cut Tips
14807 Magnaflow #642-14807 2.25" Inlet, 4" Dia x 4" Long Double Wall Straight Cut Tips
14816 Double Wall Straight Cut 3.5" Diam. Tips
6.5" Tip Length ????? Veniality did you really go 6.5in lenght tips?
#20
Looks good man. Congrats
I found this difference in the Magnaflow Mufflers
14805 Magnaflow #642-14805 2.25'' Inlet 3.5'' Dia. x 4'' Long Double Wall Straight Cut Tips
14807 Magnaflow #642-14807 2.25" Inlet, 4" Dia x 4" Long Double Wall Straight Cut Tips
14816 Double Wall Straight Cut 3.5" Diam. Tips
6.5" Tip Length ????? Veniality did you really go 6.5in lenght tips?
I found this difference in the Magnaflow Mufflers
14805 Magnaflow #642-14805 2.25'' Inlet 3.5'' Dia. x 4'' Long Double Wall Straight Cut Tips
14807 Magnaflow #642-14807 2.25" Inlet, 4" Dia x 4" Long Double Wall Straight Cut Tips
14816 Double Wall Straight Cut 3.5" Diam. Tips
6.5" Tip Length ????? Veniality did you really go 6.5in lenght tips?
Thanks Apollo. And good looks with the info on the other post.
#21
Looks good man. Congrats
I found this difference in the Magnaflow Mufflers
14805 Magnaflow #642-14805 2.25'' Inlet 3.5'' Dia. x 4'' Long Double Wall Straight Cut Tips
14807 Magnaflow #642-14807 2.25" Inlet, 4" Dia x 4" Long Double Wall Straight Cut Tips
14816 Double Wall Straight Cut 3.5" Diam. Tips
6.5" Tip Length ????? Veniality did you really go 6.5in lenght tips?
I found this difference in the Magnaflow Mufflers
14805 Magnaflow #642-14805 2.25'' Inlet 3.5'' Dia. x 4'' Long Double Wall Straight Cut Tips
14807 Magnaflow #642-14807 2.25" Inlet, 4" Dia x 4" Long Double Wall Straight Cut Tips
14816 Double Wall Straight Cut 3.5" Diam. Tips
6.5" Tip Length ????? Veniality did you really go 6.5in lenght tips?
#22
Supporting Maxima.org Member
iTrader: (16)
Join Date: Nov 2004
Location: Denver, Colorado
Posts: 2,761
Not trying to hassle you bro, but if you are talking Magna Flow 14816, I think they are 6in long tips. If your right, cool but I would double check your order.
http://magnaflowplanet.com/product.php?productid=6339
Double Wall Straight Cut 3.5" Diam. Tips 6.5" Tip Length 5" X 8" Oval Street Series Polished Stainless Steel Universal Muffler With Tips 5" X 8" Oval Street
http://www.planetmagnaflow.com/shop/...14816-425.html
Double Wall Straight Cut Dual Tips
2.25" Inlet
3.5" Tip Diameter
6.5" Tip Length
5x8 Oval Body
14" Muffler Body Length
http://www.magnaflowparts.com/produc...productid=6339
Buy your 14816 magnaflow exhaust here. Double Wall Straight Cut 3.5" Diam. Tips 6.5" Tip Length 5" X 8" Oval Street Series Polished Stainless Steel Universal Muffler With Tips 5" X 8" Oval Street Series Polished Stainless Steel Universal Muffler With Tips
http://magnaflowplanet.com/product.php?productid=6339
Double Wall Straight Cut 3.5" Diam. Tips 6.5" Tip Length 5" X 8" Oval Street Series Polished Stainless Steel Universal Muffler With Tips 5" X 8" Oval Street
http://www.planetmagnaflow.com/shop/...14816-425.html
Double Wall Straight Cut Dual Tips
2.25" Inlet
3.5" Tip Diameter
6.5" Tip Length
5x8 Oval Body
14" Muffler Body Length
http://www.magnaflowparts.com/produc...productid=6339
Buy your 14816 magnaflow exhaust here. Double Wall Straight Cut 3.5" Diam. Tips 6.5" Tip Length 5" X 8" Oval Street Series Polished Stainless Steel Universal Muffler With Tips 5" X 8" Oval Street Series Polished Stainless Steel Universal Muffler With Tips
#24
#25
Not trying to hassle you bro, but if you are talking Magna Flow 14816, I think they are 6in long tips. If your right, cool but I would double check your order.
http://magnaflowplanet.com/product.php?productid=6339
Double Wall Straight Cut 3.5" Diam. Tips 6.5" Tip Length 5" X 8" Oval Street Series Polished Stainless Steel Universal Muffler With Tips 5" X 8" Oval Street
http://www.planetmagnaflow.com/shop/...14816-425.html
Double Wall Straight Cut Dual Tips
2.25" Inlet
3.5" Tip Diameter
6.5" Tip Length
5x8 Oval Body
14" Muffler Body Length
http://www.magnaflowparts.com/produc...productid=6339
Buy your 14816 magnaflow exhaust here. Double Wall Straight Cut 3.5" Diam. Tips 6.5" Tip Length 5" X 8" Oval Street Series Polished Stainless Steel Universal Muffler With Tips 5" X 8" Oval Street Series Polished Stainless Steel Universal Muffler With Tips
http://magnaflowplanet.com/product.php?productid=6339
Double Wall Straight Cut 3.5" Diam. Tips 6.5" Tip Length 5" X 8" Oval Street Series Polished Stainless Steel Universal Muffler With Tips 5" X 8" Oval Street
http://www.planetmagnaflow.com/shop/...14816-425.html
Double Wall Straight Cut Dual Tips
2.25" Inlet
3.5" Tip Diameter
6.5" Tip Length
5x8 Oval Body
14" Muffler Body Length
http://www.magnaflowparts.com/produc...productid=6339
Buy your 14816 magnaflow exhaust here. Double Wall Straight Cut 3.5" Diam. Tips 6.5" Tip Length 5" X 8" Oval Street Series Polished Stainless Steel Universal Muffler With Tips 5" X 8" Oval Street Series Polished Stainless Steel Universal Muffler With Tips
that's the one. 6.5 inch dual tip. it should fit .right? thanks
#30
#31
Supporting Maxima.org Member
iTrader: (16)
Join Date: Nov 2004
Location: Denver, Colorado
Posts: 2,761
I think they will fit but eyeball them first before you get them actually welded on. I think they will be too long. Not as far as function goes but just for looks. They are 3in longer than the ones ILL-Maxima put on. You can get an idea how much further they will stick out.
Here is a set on a BMW, too bad there wasn't any sound.
http://www.youtube.com/watch?v=VRNbg_qWSvY
#32
Veniality,
Don't let these guys sweat you on the 14816's I have em' on my Max and they fit perfectly. I think they're jealous because they are lacking the length
And while you are on a roll, why don't you replace your resonator with another Magnaflow like I did. #10436
As some of you guys may know, I have been toiling with my exhaust system for about a month now. The journey started with the Fujita intake. Pretty much painless there. Got the dragons growl but I wanted more. Magnaflows came next, the sound improved but it could have been better. Then the genius in me decided to totally remove my resonator. I achieved the sound that I was looking for but the interior noise was killing me. Hence the resonator was tacked back on and did a little bit more research. I know Cattman sells a resonator for <$100. I was about to buy it to replace my resonator but I checked Magnaflow's web site last time and I ran into the round universal mufflers that they offer. Sizes differ but I decided that the #10436 would be the right choice. It's pretty close to size as the Cattman's. I had to compromise between the nice deep tone and the interior noise but I think I finally achieve what I was looking for. $70 at Amazon will get you the #10436
Basically I could have spend $400 on the b-pipe but why? The only main difference is that resonator. I'm slowly working from rear to front, y-pipe and headers are next.
Don't let these guys sweat you on the 14816's I have em' on my Max and they fit perfectly. I think they're jealous because they are lacking the length
And while you are on a roll, why don't you replace your resonator with another Magnaflow like I did. #10436
As some of you guys may know, I have been toiling with my exhaust system for about a month now. The journey started with the Fujita intake. Pretty much painless there. Got the dragons growl but I wanted more. Magnaflows came next, the sound improved but it could have been better. Then the genius in me decided to totally remove my resonator. I achieved the sound that I was looking for but the interior noise was killing me. Hence the resonator was tacked back on and did a little bit more research. I know Cattman sells a resonator for <$100. I was about to buy it to replace my resonator but I checked Magnaflow's web site last time and I ran into the round universal mufflers that they offer. Sizes differ but I decided that the #10436 would be the right choice. It's pretty close to size as the Cattman's. I had to compromise between the nice deep tone and the interior noise but I think I finally achieve what I was looking for. $70 at Amazon will get you the #10436
Basically I could have spend $400 on the b-pipe but why? The only main difference is that resonator. I'm slowly working from rear to front, y-pipe and headers are next.
#33
Supporting Maxima.org Member
iTrader: (16)
Join Date: Nov 2004
Location: Denver, Colorado
Posts: 2,761
Oh no, not trying to sweat my man. I was just checking out how the 14805s fit on ILLs car and was thinking three more inches is going to stick out pretty far. But I look at the pics for each set up and they look exactly the same.
I didn't realize different Magnaflow mufflers would or could be made to fit the same. It's all good. I hope it works out and post some pics when you are done.
I didn't realize different Magnaflow mufflers would or could be made to fit the same. It's all good. I hope it works out and post some pics when you are done.
#34
Veniality,
Don't let these guys sweat you on the 14816's I have em' on my Max and they fit perfectly. I think they're jealous because they are lacking the length
And while you are on a roll, why don't you replace your resonator with another Magnaflow like I did. #10436
As some of you guys may know, I have been toiling with my exhaust system for about a month now. The journey started with the Fujita intake. Pretty much painless there. Got the dragons growl but I wanted more. Magnaflows came next, the sound improved but it could have been better. Then the genius in me decided to totally remove my resonator. I achieved the sound that I was looking for but the interior noise was killing me. Hence the resonator was tacked back on and did a little bit more research. I know Cattman sells a resonator for <$100. I was about to buy it to replace my resonator but I checked Magnaflow's web site last time and I ran into the round universal mufflers that they offer. Sizes differ but I decided that the #10436 would be the right choice. It's pretty close to size as the Cattman's. I had to compromise between the nice deep tone and the interior noise but I think I finally achieve what I was looking for. $70 at Amazon will get you the #10436
Basically I could have spend $400 on the b-pipe but why? The only main difference is that resonator. I'm slowly working from rear to front, y-pipe and headers are next.
Don't let these guys sweat you on the 14816's I have em' on my Max and they fit perfectly. I think they're jealous because they are lacking the length
And while you are on a roll, why don't you replace your resonator with another Magnaflow like I did. #10436
As some of you guys may know, I have been toiling with my exhaust system for about a month now. The journey started with the Fujita intake. Pretty much painless there. Got the dragons growl but I wanted more. Magnaflows came next, the sound improved but it could have been better. Then the genius in me decided to totally remove my resonator. I achieved the sound that I was looking for but the interior noise was killing me. Hence the resonator was tacked back on and did a little bit more research. I know Cattman sells a resonator for <$100. I was about to buy it to replace my resonator but I checked Magnaflow's web site last time and I ran into the round universal mufflers that they offer. Sizes differ but I decided that the #10436 would be the right choice. It's pretty close to size as the Cattman's. I had to compromise between the nice deep tone and the interior noise but I think I finally achieve what I was looking for. $70 at Amazon will get you the #10436
Basically I could have spend $400 on the b-pipe but why? The only main difference is that resonator. I'm slowly working from rear to front, y-pipe and headers are next.
Gollum, you have a audio/video clip of how it sounds now that you installed the magnaflow resonator? I was thinking about going the b-pipe route also, but definitely don't have the $400+shipping it's gonna cost. If i can achieve the same thing for $70 then that would be awesome... But first i want to have an idea of how it sounds. I know video/audio don't really do the sound much justice as in person, but at least i would know what to expect. thanks man.
#36
#37
am just doing the mufflers, hopefully i like the sound or as what Gollum says
$70 for a new magnaflow resonator.
#38
Veniality,
Don't let these guys sweat you on the 14816's I have em' on my Max and they fit perfectly. I think they're jealous because they are lacking the length
And while you are on a roll, why don't you replace your resonator with another Magnaflow like I did. #10436
As some of you guys may know, I have been toiling with my exhaust system for about a month now. The journey started with the Fujita intake. Pretty much painless there. Got the dragons growl but I wanted more. Magnaflows came next, the sound improved but it could have been better. Then the genius in me decided to totally remove my resonator. I achieved the sound that I was looking for but the interior noise was killing me. Hence the resonator was tacked back on and did a little bit more research. I know Cattman sells a resonator for <$100. I was about to buy it to replace my resonator but I checked Magnaflow's web site last time and I ran into the round universal mufflers that they offer. Sizes differ but I decided that the #10436 would be the right choice. It's pretty close to size as the Cattman's. I had to compromise between the nice deep tone and the interior noise but I think I finally achieve what I was looking for. $70 at Amazon will get you the #10436
Basically I could have spend $400 on the b-pipe but why? The only main difference is that resonator. I'm slowly working from rear to front, y-pipe and headers are next.
Don't let these guys sweat you on the 14816's I have em' on my Max and they fit perfectly. I think they're jealous because they are lacking the length
And while you are on a roll, why don't you replace your resonator with another Magnaflow like I did. #10436
As some of you guys may know, I have been toiling with my exhaust system for about a month now. The journey started with the Fujita intake. Pretty much painless there. Got the dragons growl but I wanted more. Magnaflows came next, the sound improved but it could have been better. Then the genius in me decided to totally remove my resonator. I achieved the sound that I was looking for but the interior noise was killing me. Hence the resonator was tacked back on and did a little bit more research. I know Cattman sells a resonator for <$100. I was about to buy it to replace my resonator but I checked Magnaflow's web site last time and I ran into the round universal mufflers that they offer. Sizes differ but I decided that the #10436 would be the right choice. It's pretty close to size as the Cattman's. I had to compromise between the nice deep tone and the interior noise but I think I finally achieve what I was looking for. $70 at Amazon will get you the #10436
Basically I could have spend $400 on the b-pipe but why? The only main difference is that resonator. I'm slowly working from rear to front, y-pipe and headers are next.
do you have a vid or a soundclip of your exhaust with the magnaflow
resonator?
#39
I prefer the 14807s to 14616s because of shorter tips. I didn't want mine to stick out so much plus you get beefier tips. Here are some vids/sound clips for those who are getting late to the party. If you don't have a subwoofer you will not hear the sound properly.
http://www.youtube.com/watch?v=tX93B_NxEqw
http://www.youtube.com/watch?v=HLi21jb4jCA
http://www.youtube.com/watch?v=tX93B_NxEqw
http://www.youtube.com/watch?v=HLi21jb4jCA
Last edited by xoomer.com; 11-09-2008 at 08:51 AM.
#40
I prefer the 14807s to 14616s because of shorter tips. I didn't want mine to stick out so much plus you get beefier tips. Here are some vids/sound clips for those who are getting late to the party. If you don't have a subwoofer you will not hear the sound properly.
http://www.youtube.com/watch?v=tX93B_NxEqw
http://www.youtube.com/watch?v=HLi21jb4jCA
http://www.youtube.com/watch?v=tX93B_NxEqw
http://www.youtube.com/watch?v=HLi21jb4jCA