Maxima Forums

Maxima Forums (https://maxima.org/forums/)
-   6th Generation Maxima (2004-2008) (https://maxima.org/forums/6th-generation-maxima-2004-2008-48/)
-   -   Front Motor Mount - Finally Fixed (https://maxima.org/forums/6th-generation-maxima-2004-2008/590029-front-motor-mount-finally-fixed.html)

BlackSpeed 05-11-2009 09:07 PM

Front Motor Mount - Finally Fixed
 
Well, I broke down and ordered a front motor mount from eBay. Unit arrived today and I decided to start the install. Well, for starters, the unit is not as wide as OEM (used spacers).. 3 Hours later, Thank God I got this fixed. Back to the nice smooth launch..

MaxJ04 05-12-2009 06:51 AM

good. mine was broken at 30K.. and i had replaced 175$ from nissan. and 100$ to swap in by my mechanic. it was a PITA to install. car feels more powerful and feels less vibration at the steering wheel

rick sambora 05-12-2009 04:59 PM

How do you know if the motor mount is broken? Can some one post pics or links to a previous thread that discussed this. I checked with not much success.
Thanx
Rick

Terrentius 05-12-2009 05:49 PM

Where is this motor mount located?

BlackSpeed 05-13-2009 08:01 PM

My mount was trashed to pieces. I have a 6mt, so I had to be extra careful with clutch release or else I would hear a loud thump. Now that it's fixed, I release the clutch like an old lady:D (not riding it).. The front motor mount that was changed is located just at the back bottom of the radiator. I noticed that the rubber insert looked as if Edward Scissor hands had worked his magic on it.

Terrentius 05-14-2009 02:32 AM


Originally Posted by BlackSpeed (Post 7028994)
My mount was trashed to pieces. I have a 6mt, so I had to be extra careful with clutch release or else I would hear a loud thump. Now that it's fixed, I release the clutch like an old lady:D (not riding it).. The front motor mount that was changed is located just at the back bottom of the radiator. I noticed that the rubber insert looked as if Edward Scissor hands had worked his magic on it.

Okay..cool. Thanks. I looked through the Service Manual but had no luck in finding it. Just looking to do a visual inspection to make sure everything is good to go.

KC2010 05-18-2009 11:08 AM


Originally Posted by BlackSpeed (Post 7028994)
My mount was trashed to pieces. I have a 6mt, so I had to be extra careful with clutch release or else I would hear a loud thump.

Loud thump? This sparked my interest. I notice on hard launches a thump sound. I always thought it was a CV boot going bad but the "cv boot test" (driving in circles) always passes. I wonder..... Hmmmm.....


All times are GMT -7. The time now is 05:22 AM.


© 2024 MH Sub I, LLC dba Internet Brands