Ok so I gave up on trying to get the o2 simulator to work. Now I know a few of you guys have had your secondary o2 sensors extended via splicing/soldering etc... For those of us somewhat uneasy about doing so, I may have found a solution:

http://www.summitracing.com/parts/CEI-109008

Caspers is pretty local to me, so I intend to call them tomorrow to see if that specific universal harness will work for our cars. I don't see why it wouldn't work, but I will call them just to make sure.

 

Well, it's for a GM... they are checking to see if they have anything for us.

 

get your tape get your cutting pliers.. splice the wires run them to the sensor... and make sure they work.after that dont look at them again shure it wont bother you...

 

So true I extened 2 primaries and 1 secondary with this method, no light ! good to go after 300 miles.

 

wrong way of doing things, proper way is to solider the wires and heat shrink them back.

Having expose wires will mess with the o2s and esp in the A34s ECUs

also wires must be the same gauges wires.

 

They never got back to me so forget it. Soldering in some 18 gauge wire I picked up at Radio Shack worked fine!