Catching up on upgrade updates
07-09-2010, 01:32 PM
#1
Member
Thread Starter
Join Date: Aug 2009
Location: State Line, MS 39362
Posts: 68
Catching up on upgrade updates
It's been a while since i've posted anything new about my wife's car. But I work in the Gulf of Mexico and if you have looked at a tv or listened to a radio you know it's been crazy out there.
So far, it's got 1800w worth of Kenwood **** inside, Racingline strut brace, Racingline ground kit, Racinglive y-pipe, T-Rex Billet grilles, TSW Vortex 20x10 rear and 20x8.5 front, custom Flowmaster exhaust, Stillen intake.
But ,anyway, here's a couple pics and a video.
Let me know what you guys think.
<embed width="600" height="361" type="application/x-shockwave-flash" allowFullscreen="true" allowNetworking="all" wmode="transparent" src="http://static.photobucket.com/player.swf" flashvars="file=http%3A%2F%2Fvid209.photobucket.co m%2Falbums%2Fbb226%2Fjeremy_crager%2F100_0843.mp4" >
So far, it's got 1800w worth of Kenwood **** inside, Racingline strut brace, Racingline ground kit, Racinglive y-pipe, T-Rex Billet grilles, TSW Vortex 20x10 rear and 20x8.5 front, custom Flowmaster exhaust, Stillen intake.
But ,anyway, here's a couple pics and a video.
Let me know what you guys think.
<embed width="600" height="361" type="application/x-shockwave-flash" allowFullscreen="true" allowNetworking="all" wmode="transparent" src="http://static.photobucket.com/player.swf" flashvars="file=http%3A%2F%2Fvid209.photobucket.co m%2Falbums%2Fbb226%2Fjeremy_crager%2F100_0843.mp4" >
freaking awesome choice of wheels! they look like Lexus GS300 wheels.
07-09-2010, 09:57 PM
#9
Member
Thread Starter
Join Date: Aug 2009
Location: State Line, MS 39362
Posts: 68
Flowmasters were about $80/ea., stainless tips $70/ea., then i had to get the pipe and have it bent i think it was like $315 all together.
Not positive about the part# but i think it was 952545(center inlet and center outlet 2.5") or 842440(center inlet and center outlet 2.25").
oh yeah, thanks for all the support guys. i appreciate it.
Not positive about the part# but i think it was 952545(center inlet and center outlet 2.5") or 842440(center inlet and center outlet 2.25").
oh yeah, thanks for all the support guys. i appreciate it.
Last edited by jeremy_crager; 07-09-2010 at 10:00 PM.
07-10-2010, 12:49 AM
#13
Member
Thread Starter
Join Date: Aug 2009
Location: State Line, MS 39362
Posts: 68
Honestly I'm not positive on the tint percentage. I know that it's legal in Mississippi so, I think it's either 25% or 30%. Had to keep it clean cause I'm kinda famous with the southern state's fine law enforcement. They stop me and ask for my autograph all the time. 
Sorry if the first video link didn't work maybe this one will.
Sorry if the first video link didn't work maybe this one will.
07-10-2010, 12:31 PM
#16
Member
Thread Starter
Join Date: Aug 2009
Location: State Line, MS 39362
Posts: 68
Sorry guys I was wrong about the system, it's 1500w not 1800w. Anyway, here's some pics.
Threw a couple in of the engine bay also. I know alot of people on here probably have never seen the engine without all the plastic **** all over it. I took all that garage off cause it pretty much serves no purpose(other than aesthetics). I'm always taking stuff apart and working on it so it had to go. Enjoy!
Threw a couple in of the engine bay also. I know alot of people on here probably have never seen the engine without all the plastic **** all over it. I took all that garage off cause it pretty much serves no purpose(other than aesthetics). I'm always taking stuff apart and working on it so it had to go. Enjoy!
07-10-2010, 06:35 PM
#22
Member
Thread Starter
Join Date: Aug 2009
Location: State Line, MS 39362
Posts: 68
Windows are a little faster, but the main reason I put it on is, all the audio stuff. Also, it definately doesn't hurt to have a vehicle's electrical system properly grounded. So, it was a win-win situation.
07-14-2010, 09:16 AM
#23
Junior Member
Join Date: Jun 2010
Location: Edmonton Alberta Can
Posts: 96
@jeremy_crager I was wondering what kinda set-up you had going with your Rims & Tires? Who Makes those rims?
07-15-2010, 04:29 PM
#24
Junior Member
Join Date: Jul 2010
Location: Gainesville, FL
Posts: 52
Normally, I'm for keeping cars "original" having been involved in the restoration of many things from cars to jukeboxes. But, as a design professional, I think what you've done is very tastefull. My car is Frost with charcoal leather. And I half-wish they'd left the damn spoiler off! I'm also digging the very simple grill. I've seen that elsewhere on this site, and like it. I'd like to see one in person sometime. Nice work!
Thread
Thread Starter
Forum
Replies
Last Post
litch
4th Generation Maxima (1995-1999)
123
01-04-2024 07:01 PM
mkaresh
8th Generation Maxima (2016-)
21
03-12-2018 06:48 PM