Hey guys i am looking to step up my rim size a bit. Has any one had any experience going 20x10 all around on our car? I have a 2012 Maxi SV Sport with 19" stock.

 

Et40 and 255/35/20 and you won't have any problems.

 

Its funny you mention that tire size thats exactly what i was thinking, so i just need to check that the manufacturer makes the 20x10 in a 40 offset right?

 

Yes

 

Just put 20x10 Rohanas on my 2014 with an Eibach pro kit, no fitment issues or rubbing whatsoever, wheels tuck in perfectly flush.

 

@NasTTySVT if I mount these on stock shocks, coils and brakes will they still fit? I dont mind if they stick out a little wider, thats actually what im going for, I am just concerned with hitting the brakes, and rubbing the fenders too much.

 

Can you put up a picture of your car sitting on the Rohanas? Would love to see!

 

 

To the best of my knowledge you shouldn't have any fitment issues at all.

 

Nice your car isn't dropped st all is it? Do you find the tires stick out a little more cause that's what I'm looking for. Going to put mine on 255/35/20 tires

 

They sit relatively flush. It is lowered on an Eibach Prokit which isnt a very large drop, and exactly what I wanted. 255/35/20's

 

Yeah I like how yours fill the wheel well perfectly . How much was the drop? I will probably install mine first without the drop, see if there's no issues then drop Same as yours. The reason is the wheels I'm getting are pretty concave.

 

For the pro kit they claim 1-1.5"

 

So I ordered my Niche Verona M149s in 20X10 and also ordered the same Eibach pro kit you have. Really excited, I will post pics up here when the work is all done in about a month. Here is what im hoping it will look like, not so much of a drop though.

 

 

Check it out, throwing the 20s on this Saturday

 

 

 

what is the ET on those wheels?

 

20X10 with 40MM offset wrapped in 255/35/20 Falken Ziex 950 tires, the lip is really exposed which i dont like but i learned that it is the rim design that determines how much the lip is exposed.

 

Car is also dropped on Eibach Pro Kit Springs 1.3"

 

Thank you

 

Sorry to bump this old thread but I just purchased some used 20 inch wheels with tires. 20x8.5 & 20x10. Trying to figure out if my rear wheel/tire set will fit 285/35/20 offset 40. I'm dropping my car next weekend on Eibach springs. I'm hoping my current tires will work since tires are at about 95% tire thread. I don't have a problem having my fenders rolled, just want to know what to expect that way I can have my fenders rolled before I install my springs next weekend. Any help is highly appreciated