Will 20 inch rims fit on 2016 Max?
#163
Junior Member
Join Date: Dec 2017
Posts: 91
#168
Yup. I had 20x8.5 on mine. In fact, I am selling my wheels as I have traded my Maxima in. TSW Nurburgring gunmetal w/ mounted Michelin Pilot Sport 4s w/ TPMS.
Last edited by The Wizard; 06-05-2018 at 09:16 AM.
#169
Newbie - Just Registered
Join Date: Aug 2018
Posts: 1
#175
Newbie - Just Registered
Join Date: Aug 2018
Location: Staten Island, Ny
Posts: 7
#176
Senior Member
Join Date: Feb 2010
Posts: 916
#177
Newbie - Just Registered
Join Date: Oct 2018
Posts: 1
245-45-20 20x10 rims 38 offset with no rubbing



I've been looking around to find out if 20x10 rims will fit all around my 2016 maxima. I was told by Wheelfire that they will rub. So I didn't listen to them and I'm glad I didn't. WHY? Cause there is no rubbing at all front or back. So today I'm even going to be dropping it down 1.4 with Eibach springs. I feel like I could have ran 255/45/20 with some rubbing on the backside of wheel wall plastic cover.
Last edited by Leroy Thomas Jr.; 10-24-2018 at 11:56 AM.
#181
Newbie - Just Registered
Join Date: Sep 2018
Posts: 3
I think you have a perfect setup man. Wheels are flush with the fenders, tires stretched but not too much. Im just wondering if you have any rubbing issue against the fenders or against the wheel liner when turning full turn?
#183
#184
Newbie - Just Registered
Join Date: Sep 2018
Posts: 3
Great look squared look sir! I've been shopping for wheel/tire combo for sometime now...for a squared up look. Don't really care for stretched tire look...loving the tires look mounted to those wheels. I think this would be a great setup for my 7gen max. Cool on how flush she sets cornered up. Are you running stock or any suspension mods?
#186
Newbie - Just Registered
Join Date: Dec 2018
Posts: 10
you running 20s with eibachi springs? . I wanna lower my 2014 max, and seen done good 20s for sale , but cant decide between 20s or 19s... afraid of rubbing or if got passengers in the back as well. Any feedback greatly appreciated.
#187
You have a 7th gen that you’re interested in putting aftermarket wheels and tires on and lowering it with springs? If that’s the case you have no worries there like you do with the 8th gens. On my 7th gen I was running 20x10.5 with +30 or 28 (can’t remember exact offset but it was low) squared on springs before going to air and I had no problems at all. You should be good with a pretty wide range to choose from 19’s or 20’s.
Thread
Thread Starter
Forum
Replies
Last Post
Stopsweatinme
8th Generation Maxima (2016-)
2
07-07-2016 10:33 AM