q45 caliper relocation bracket
does ANYONE know of someone making or selling the relocation bracket for a 4th gen with the q45 setup.. it's a bit of a hassle having to find someone to shave 8mm of the outter diameter everytime i have to get new rotors. :banghead:
|
use s14/z33 track brackets w/ 6g rotors.
|
Originally Posted by BLKonBLK98
(Post 7956773)
use s14/z33 track brackets w/ 6g rotors.
Something like this.... http://cgi.ebay.com/ebaymotors/ws/eB...K%3AMEWAX%3AIT |
Jeff92se here on the org I think still makes the dog bones to fit the brakes
|
Originally Posted by mista0406
(Post 8024580)
Jeff92se here on the org I think still makes the dog bones to fit the brakes
I know Matt sold blehmco, but curious if they still sail the brackets. Will have to PM him |
Originally Posted by Flava_24/7
(Post 8024681)
But those are for the Cobra rotors correct?
I know Matt sold blehmco, but curious if they still sail the brackets. Will have to PM him |
Brackets
Jeffs brackets can be used with the Z32 and the Q45 calipers, but are made to only be used with the Cobra rotors.
|
Originally Posted by Flava_24/7
(Post 8024681)
But those are for the Cobra rotors correct?
I know Matt sold blehmco, but curious if they still sail the brackets. Will have to PM him
Originally Posted by mista0406
(Post 8024975)
It was said and I was under the impression, and don't quote me, that the ones Jeff sells works with both Q45 and the Z32 calipers and that rotor didn't matter. Brackets were made so the calipers would align properly, please correct me if I'm wrong.
Originally Posted by Maximathug
(Post 8025064)
Jeffs brackets can be used with the Z32 and the Q45 calipers, but are made to only be used with the Cobra rotors.
If you want to use the smaller Q rotors with the Q45 calipers, it's easier to get the rotors shaved. The amount of adjustment is so small that it would be pretty hard to design a bracket that accomodates only a few mm while maintaining the same nissan rotor offset. |
Originally Posted by Flava_24/7
(Post 8024503)
Would this work with the Z32 calipers as well?
Something like this.... http://cgi.ebay.com/ebaymotors/ws/eB...K%3AMEWAX%3AIT |
Bolt holes are ever so slightly off as the FWD nissans does not = RWD nissans in caliper/rotor fitments. It this difference that makes us have to shave the rotor in the 1st place. This might work to get a bigger rotor but you'd still have to shave the bigger rotor.
|
k i have your dogbone brackets jeff but i need to know if i absolutely need some hub rings... i keep seeing yes and no in all this research
|
It was too hard for my machine shop to make those hub rings. Since then, Automax has been redrilling a set of Nissan sized stud holes in the Ford Cobra rotors. I haven't read any problems from centering the rotors using this method. So this is the solution I point everyone too.
|
automax is a member here or a place?
|
He's a member here and has the rotors for sale in the group deal section
|
All times are GMT -7. The time now is 07:56 AM. |
© 2024 MH Sub I, LLC dba Internet Brands