Does anyone know How fast the fourth gen will be after the swap is complete i mean i would like to do it if it is worth it ... for the people who have the swap done can you beat mustang gt's...... or come damn close or can you race with stock srt-4's.... or wrx's .... and are you guys swaping the 5th gen maxima engine in or the 6th gen engine in .... and about how much did it cost to get the whole process done with

 

This has never been asked before.

 

never work.

The electronics would not support it.

The 4th uses 16 bit and the 5th uses 32 bit. This would not allow control of the VTC's or the electronic throttle. Also the clearance between the intake manifold and hood would be too close, meaning when the engine I under load, and flexes, it would put strain on the hood supports. Also the corss member is too high on the 4th gen so the oil pan and bell housing would rub.

Best thing to do is buy the AEBS stroker kit, and interchange parts from the VQ30 and the AEBS kit.

 

Why didn't you tell me this last week? Before I spent all that money.

 

Dude you need to swap a K20, so much easier. Vtec can work with the 16 bit ecu, remember?

 

Hey, it's never too late.

I ended up using an old laptop with a consult II piggyback.

 

Yeah I wish this was possible. I bet if it was it would look something like this.

Too bad its not though.

 

OH MAN...that's soo sweet

Wish it was possible

Kinda like how you can't get projectors in a 4th gen, either. God 4th gens suck

 

Amazing what you can do with Photoshop?

 

Oh definitely

 

wut are u guys talkin about i mean im a simple minded kid i dont understand ......wut 3.5 engine are you guys putting in ur 4th gen maxima???????????? and wutever one ur putting in i would like to know if it is fast and if it can keep up wit mustang gt's.......

 

Rustang GT's and Calloway Camaro's too easy. Keep up?? They just eat dust.

 

dude, read the stickies in the all motor forum...all the info you need is there

 

What the ...!! Who photoshopped my trash can into that pic? And my hood prop, too!!!

 

Checks sig.....right

 

all it says is 3.5 engine....

it dont say nuthin about from wut year car.... and it dont say how fast or wut it can keep up with or beat

 

Did you not read the entire Sticky? You didn't even have to get past post #5 to see that all the info is there. It says what 3.5s to use and gives you the 1/4 mile times and even approx 0-60s, since that is much more useful information than what cars it will beat because that is subjective and useless information.

 

I would think putting in a 3.5 would make you slower, because it's .5 liters heavier.

And yes I can beat them. (99-04 GT's)

 

Check the 1/4 mile forums to see what A32's have been running when equipped with the VQ35.

 

Thank you for speaking on behalf of everyone relatively close to your age

 

Kids these days...

 

.:Fixed:. .. ........

 

^ I love that smiley lately

 

Yeah that kid has alot of reading.

 

You guys are harsh on the new guys. Help the man out. I've been out of the Maxima scene for a while and things have changed around here. Instead of a bunch of useless posts, provide links and information. That's what are here for isn't it?g

 

It gets old, and spoon feeding isn't our specialty. 5 mins of searching coupled with common sense should suffice with at least some of the asnwers but most 's on here are too lazy, and wont try, at least an honest effort is all we ask.

 

AMEN! PREACH!

 

Everyone here has asked newb questions. I got my Maxima when I was 19 and asked my share of newb questions. I am sure somewhere along the line a OG member here has helped you out. In the old days, you could easily search this forum. It was a lot easier to find information. It's just as easy to copy a link as it is to chastize someone.

 

Yes, but I none of us OG's were that lazy, and would actually pop our hoods every now and then, and not just post first thing. I admit, I, and most if not all of the old members have asked a stupid question here and there, but it was when the org was young, and we hadn't even scratched the surface as far as custom modifications go, so we had a right to ask, because none of it had been done before, and the information was not on here, but now it is, so there's no excuse.

Spend a morning in the 4th gen forum and you'll see what I mean. People can't find their drain plugs...want to change VQ timing belts, think that intakes sitting in between the exhaust manifold and radiator are still considerd a CAI, buy spark plug wires for the VQ, ...

I'll post a link or 2 and help out, but typically make the rookie try and think, and give them a few hints before I get the spoon and bib out.

 

READ THE STICKIES! boy oh boy. newbs these days. make all kids sound retarded

 

Yeah I'm like you and used to say the same thing until I started seeing the same threads over and over again because people didnt search first. If you look in the 4th gen forum and read the titles on the first page you'll see the same ones on the second page. I mean there is a sticky as big as day at the top of this forum that says 3.5 swap procedure and FAQ.

 

I think we need to make it bigger.

 

It wouldn't make a difference. Look at post #16. He saw the sticky, maybe clicked on it, but didn't seem to read anything in it.

 

wut sticky does it tell u the 0-60 times and the quartermile? i jus looked in all the all motor ones and it does say somthin bout the guartermile guesstamit around low 13's and all it says is 3.5 nothin about the year it does say all the models but each model has a diffrent horsepower and like the 2000 maxima had 220 and the 2002 had 240 and the 2004 had 265 so witch of those 3.5 liter engines did they use?? im not sure i forgot about if the 2000 was a 3.0 or 3.5.... and so can someone jus tell me the year and engine they use and or give me a link to the 0-60 and actual quartermile no guesses....thats why this post was for the people who actually had the swap done....

 

Jesus tapdancing christ... every single thing you just asked has been answered multiple times in this forum. Stop relying on others and start reading posts to find the answers for yourself. If you have any pipe dreams of ever doing this swap you have to learn how to look things up yourself (hint: donate and search). If you can't do that simple 3 minute operation, you'll never be able to swap an engine into your car.

 

LMAO...u guys r a tough crowd...

 

Yeah.

http://forums.maxima.org/showthread.php?t=344962

That was the very first thread posted in this forum. Take note of the extreme sarcasm.

Spoon feeding gets real old real quick.

 

I tried to help, but I can't anymore... all the best.