Maxima Forums

Maxima Forums (https://maxima.org/forums/)
-   All Motor (https://maxima.org/forums/all-motor-61/)
-   -   making. 62mmt/b. for the 4thgens. (https://maxima.org/forums/all-motor/670838-making-62mmt-b-4thgens.html)

I<3 A32's 10-01-2013 10:24 AM
making. 62mmt/b. for the 4thgens.
 
So. I made. One. Already. Sold. It. To my. Buddy. Imm. Going. To. Make. More. I think. But. Would. That. Be enough mm. For. Some. One. To. Pay. $$ for. It,??

Fakie J Farkerton 10-01-2013 10:32 AM
Your. Periods. Are. Killing. Me.

And the answer is no..70mm PFTB FTW.

I<3 A32's 10-01-2013 10:34 AM
Originally Posted by Fakie J Farkerton (Post 8858400)
Your. Periods. Are. Killing. Me.

And the answer is no..70mm PFTB FTW.
Its. My phone its. Cracked lol.

Fakie J Farkerton 10-01-2013 10:36 AM
Originally Posted by I<3 A32's (Post 8858405)
Its. My phone its. Cracked lol.
How many mm's are the stock 4th gen TB?

I<3 A32's 10-01-2013 10:41 AM
Originally Posted by Fakie J Farkerton (Post 8858409)

How many mm's are the stock 4th gen TB?
60Mm

70Mmpftb+adapter=more than100$$ i was thinking. Of. Making. Them. And. Selling them. For75$$ with exchange

Fakie J Farkerton 10-01-2013 10:44 AM
2mm difference?
:mrgone:

I<3 A32's 10-01-2013 10:46 AM
Originally Posted by Fakie J Farkerton (Post 8858414)
2mm difference?
:mrgone:
That.080. That's. A. Lot. Trust..lol. that's the. Differance. Btween. The. Honda. B18b1and the type-r. Lol. Its a differance

I. Was. Going to. Try. To make. 72Mm t/bs. But i don't. Have extras

Fakie J Farkerton 10-01-2013 10:53 AM
Dude don't use your phone anymore until you get it fixed..seriously.

I<3 A32's 10-01-2013 10:56 AM
Originally Posted by Fakie J Farkerton (Post 8858421)
Dude don't use your phone anymore until you get it fixed..seriously.
No.

NmexMAX 10-01-2013 11:37 AM
First prove there are gains to be had with a little less than 80 thousands. Then mass produce it.

I'd still recommend a PFTB for anyone wanting to go bigger on a cable driven 4th gen.

I<3 A32's 10-01-2013 11:40 AM
Itslike.0801. Not. Lessthan. It. Will be a true. 62Mm

Originally Posted by NmexMAX (Post 8858456)
First prove there are gains to be had with a little less than 80 thousands. Then mass produce it.

I'd still recommend a PFTB for anyone wanting to go bigger on a cable driven 4th gen.
But. You. Have. To. Spend. Idkhowmuch. On.adapter Plates. And. It won't look stock.

NmexMAX 10-01-2013 11:51 AM
Come on man, 1mm = .03937, so .07874 Splitting hairs, but it's the principle.

I<3 A32's 10-01-2013 11:59 AM
I do this all day long trust. A. Hair. Is like.003-.001

Its. Like saying. Oh. I. Got a 3.3l..lol

schmellyfart 10-01-2013 01:01 PM
Originally Posted by NmexMAX (Post 8858456)
First prove there are gains to be had with a little less than 80 thousands. Then mass produce it.

I'd still recommend a PFTB for anyone wanting to go bigger on a cable driven 4th gen.
PFTB FTMFW!

My PFTB looks stock, OP.

If you really want people to buy it, do before and after dynos of the 62mm and the pftb.

I<3 A32's 10-01-2013 01:11 PM
Originally Posted by schmellyfart (Post 8858503)
PFTB FTMFW!

My PFTB looks stock, OP.

If you really want people to buy it, do before and after dynos of the 62mm and the pftb.
I. Can't. I. Sold. It. Already um on the 70mm

Originally Posted by schmellyfart (Post 8858503)
PFTB FTMFW!

My PFTB looks stock, OP.

If you really want people to buy it, do before and after dynos of the 62mm and the pftb.
How. Bigg can. You port. The. Mevi. Or. The. Stock. Manifold. Even. If. You. Don't. Port. The. Manifold. Its just a wast

NmexMAX 10-01-2013 01:42 PM
Fact still remains, 2mm is less than .080.

schmellyfart 10-01-2013 04:57 PM
1 Attachment(s)
Attachment 61018

I<3 A32's 10-02-2013 10:58 AM
Originally Posted by NmexMAX (Post 8858526)
Fact still remains, 2mm is less than .080.
But im making. Them. .080. Bigger

NmexMAX 10-02-2013 11:31 AM
Originally Posted by I<3 A32's (Post 8858874)
But im making. Them. .080. Bigger
You figured out any gains yet? Independent testing?

I<3 A32's 10-02-2013 11:41 AM
More. Top end. I. Would. Hang. With oovis. Ran. A 10.003on the 1/8. Jus. Short. Ram. And. No muffler

NmexMAX 10-02-2013 11:54 AM
Got proof?

I<3 A32's 10-02-2013 12:09 PM
I. Rann. With a. Fellow. Maxima. I. Lost. My. Time. Slip. But. I. For. Get. His. Name. On here. His. Name. Is. Andrew. He. Ran a 9.3on his. 6Thgen

I<3 A32's 10-02-2013 12:16 PM
Twentyeggs

SurraTT 10-02-2013 04:57 PM
62mm? :laugh:



75 stock.. :confused:

SurraTT 10-02-2013 04:58 PM
ahhhhhh the new sig and avatar looking gooood hahaahahah

I<3 A32's 10-10-2013 06:56 AM
So. I. Got it up to a 64mm. That's as far as i can go

grey99max 10-10-2013 07:34 AM
Originally Posted by I<3 A32's (Post 8861952)
So. I. Got it up to a 64mm. That's as far as i can go
Since you are spending so much time on making the old 4th gen TB breathe better, have you considered cutting off the top half of the throttle shaft? This means removing the two screws holding the throttle blade, sliding out the blade, using a hacksaw blade to cut off the upper part of the shaft (without the threaded holes), countersinking the blade a bit and using new flathead screws to attach the blade back to the shaft. With blue locktite...

I did this to my '01 Pathy TB, making measurements as I went, and I picked up a real 10% increase in the area of the throat of the TB. Without grinding on the TB to do it. Just a thought...

I<3 A32's 10-10-2013 08:07 AM
Originally Posted by grey99max (Post 8861967)

Since you are spending so much time on making the old 4th gen TB breathe better, have you considered cutting off the top half of the throttle shaft? This means removing the two screws holding the throttle blade, sliding out the blade, using a hacksaw blade to cut off the upper part of the shaft (without the threaded holes), countersinking the blade a bit and using new flathead screws to attach the blade back to the shaft. With blue locktite...

I did this to my '01 Pathy TB, making measurements as I went, and I picked up a real 10% increase in the area of the throat of the TB. Without grinding on the TB to do it. Just a thought...
Imm goin to do this. Too. After. I'm. Done. With. The t/b plate

aackshun 10-10-2013 12:48 PM
http://d24w6bsrhbeh9d.cloudfront.net...1mvK_460sa.gif

Add in your. Periods. Of. Course.

:mrgone:

Gemner 10-10-2013 01:03 PM
how does a broken phone deposit periods randomly all over a message? doesnt even make sense. If they show up while youre typing then JUST DELETE THEM

Fakie J Farkerton 10-10-2013 01:32 PM
1 Attachment(s)
Attachment 28192

I<3 A32's 10-10-2013 02:09 PM
Originally Posted by Gemner (Post 8862080)
how does a broken phone deposit periods randomly all over a message? doesnt even make sense. If they show up while youre typing then JUST DELETE THEM
No time

Gemner 10-10-2013 02:52 PM
making coherent posts?

http://embracethelittlethings.files....ahm2o1_500.jpg

I<3 A32's 10-10-2013 03:32 PM
Originally Posted by Gemner (Post 8862137)
making coherent posts?
No!

Gemner 10-10-2013 03:34 PM
let me guess, your broken phone doesnt load pictures either?

I<3 A32's 10-10-2013 05:29 PM
Originally Posted by Gemner (Post 8862165)
let me guess, your broken phone doesnt load pictures either?
Can u up load pics using the app??

Originally Posted by Fakie J Farkerton (Post 8862097)
:laugh:

So I finally have time to get on my laptop im like super busy or im not home so let me see

almost finished

I<3 A32's 10-16-2013 06:34 AM
Ended. Going to a. 64Mm. Might. Be abel to make the oovi's a65mm

maxboy325 11-02-2013 01:08 PM
1 Attachment(s)
Man such a waste of time. Come hang with my 00vi I have a PFTB

Looks pretty stock to me.....


Attachment 27713

maxima.713 11-02-2013 02:57 PM
People are still trying to go fast with 3.0's? Vq35 FTMFW!!

TurboA32 12-04-2013 02:21 AM
Originally Posted by maxima.713 (Post 8871263)
People are still trying to go fast with 3.0's? Vq35 FTMFW!!
The 3.0 is more reliable that's why


All times are GMT -7. The time now is 10:10 PM.


© 2024 MH Sub I, LLC dba Internet Brands