Trunk tear down and rebuild log *pics*
well...where do i begin...
the unit looks and performs great...much better than the pioneer premiers that i've previously owned. the settings and such are a bit confusing at first, but eh...i got the hang of it pretty fast. i don't know why people said eclipse decks are hard to navigate...it's really not that bad.
there's are a lot more options in terms of sound adjustment, and you can tune it to your heart's content. great product, and i should've got this deck long ago. 
that said...ran into some issues. the damn metra kit is preventing the faceplate to fold down freely. unlike the pioneer which just slides downward...this eclipse deck seems to go out a little bit, THEN drops down. it's hitting part of the dash kit. if i press in towards the middle of the kit, then the faceplate lowers just fine. i gotta think of a fix for this...
the other issue, is that i think my passenger side mid might be blown. i took a DMM to it, and resistance measured only .7 ohm! measured the driver side, and it was at a healthy 3.7 ohm. like i told don over the phone...my dealer better be able to warranty this without any hassle...
anyhow...i love the deck!
edit: confirmed that the mid is blown. took the door panel off and took it out. i can hear the coil rubbing within the gap when i move the cone. it's done for...
the unit looks and performs great...much better than the pioneer premiers that i've previously owned. the settings and such are a bit confusing at first, but eh...i got the hang of it pretty fast. i don't know why people said eclipse decks are hard to navigate...it's really not that bad.
there's are a lot more options in terms of sound adjustment, and you can tune it to your heart's content. great product, and i should've got this deck long ago. 
that said...ran into some issues. the damn metra kit is preventing the faceplate to fold down freely. unlike the pioneer which just slides downward...this eclipse deck seems to go out a little bit, THEN drops down. it's hitting part of the dash kit. if i press in towards the middle of the kit, then the faceplate lowers just fine. i gotta think of a fix for this...
the other issue, is that i think my passenger side mid might be blown. i took a DMM to it, and resistance measured only .7 ohm! measured the driver side, and it was at a healthy 3.7 ohm. like i told don over the phone...my dealer better be able to warranty this without any hassle...
anyhow...i love the deck!

edit: confirmed that the mid is blown. took the door panel off and took it out. i can hear the coil rubbing within the gap when i move the cone. it's done for...
Originally Posted by Strontium
I wonder if that USB input has enough power to it, to power a 160GB USB drive... I really want to replace my Bose with that unit and Infinity speakers. Just wish I could afford that unit.
For budget, ive been looking at this...
http://www.crutchfield.com/S-BySfaed...=020DXZ775#Tab
I think it would integrate well with a harddrive, not to mention as a 24 bit DA converter, three way capable with bandpassable on two of the three sets of channels, and time alignment, even plays AAC for 300 bucks authorized
Nearly half the price of the 5100, I think its an absolute STEAL
Originally Posted by Fast1one
Maybe a 2.5 inch...
For budget, ive been looking at this...
http://www.crutchfield.com/S-BySfaed...=020DXZ775#Tab
I think it would integrate well with a harddrive, not to mention as a 24 bit DA converter, three way capable with bandpassable on two of the three sets of channels, and time alignment, even plays AAC for 300 bucks authorized
Nearly half the price of the 5100, I think its an absolute STEAL
For budget, ive been looking at this...
http://www.crutchfield.com/S-BySfaed...=020DXZ775#Tab
I think it would integrate well with a harddrive, not to mention as a 24 bit DA converter, three way capable with bandpassable on two of the three sets of channels, and time alignment, even plays AAC for 300 bucks authorized
Nearly half the price of the 5100, I think its an absolute STEAL
Looks good. Price is just about what I'd be willing to shell out. I wonder if anyone here has any experience with this unit and can comment on quality? Actually, I'll start another thread when I have cash
I've thread-jacked enough, already.
Originally Posted by Strontium
Looks good. Price is just about what I'd be willing to shell out. I wonder if anyone here has any experience with this unit and can comment on quality? Actually, I'll start another thread when I have cash
I've thread-jacked enough, already.
I've thread-jacked enough, already.
well...a section of the voice coil came unwound, and was hitting the back of the cone around the former (which would explain the tinging sound i've been hearing). the mids are being sent back today.
now with both mids gone and just the tweeter still working, i'm more amazed on how low they can actually go. it's sorta complemention the rear fills nicely...
now with both mids gone and just the tweeter still working, i'm more amazed on how low they can actually go. it's sorta complemention the rear fills nicely...
Originally Posted by AscendantMax
well...a section of the voice coil came unwound, and was hitting the back of the cone around the former (which would explain the tinging sound i've been hearing). the mids are being sent back today.
now with both mids gone and just the tweeter still working, i'm more amazed on how low they can actually go. it's sorta complemention the rear fills nicely...
now with both mids gone and just the tweeter still working, i'm more amazed on how low they can actually go. it's sorta complemention the rear fills nicely...

Would you like me to check on this again?
Originally Posted by Pearl96Max
Would you like me to check on this again? 


he said he was going to fedex later on tonight to ship some stuff, and he'll ship the mids as well.
Originally Posted by The Law
Hey don,
which eclipse hu has the option to change the coloring to one solid color? CD5000?
I R Stalker
which eclipse hu has the option to change the coloring to one solid color? CD5000?
I R Stalker

Want me to do all the work for you?
Originally Posted by Pearl96Max

I R Stalker
Originally Posted by Pearl96Max
Ill check tomorrow as Im sure they still wont be shipped yet. 

Originally Posted by The Law
Damn, now I regret buying the CD4000. I shoulda bought the CD 5000/7000 at the time.
Yep!
Originally Posted by AscendantMax
i never said anything about buying them... 
heard some Hertz 3 ways today at the shop. sounds pretty damn good i must say.

heard some Hertz 3 ways today at the shop. sounds pretty damn good i must say.
Which ones? Get a chance to demo Milles?
so i tried fixing the dash kit today. i can't get the plate to sit further 'in' onto the dash. the faceplate is still hitting the top part when i press eject. 
anyone got any ideas?

anyone got any ideas?






