(226.86 HP, 227.76 TQ) (296.66 HP, 324.15 TQ) 03 6 Speed
#1
(226.86 HP, 227.76 TQ) (296.66 HP, 324.15 TQ) 03 6 Speed
Finally I got my car to the dyno. I ran two runs. Both runs were 3rd gear runs. Temp was about 85 Degrees.
First run
Fidanza Flywheel, Spec Stage 3 Clutch, Berk Intake, Greddy Catback
226.86 HP
227.76 TQ
84.89 Degrees and 36% Humidity
Second run
Above mods with 75 shot
296.66 HP
324.15 TQ
86.38 Degress and 36& Humidity
The second run was cut short at about 4800 RPMs. The car started to lean out and I didnt have any jets to up the fuel. The dyno guy was very confident id easily be over 300 hp and 330 tq once I adjust the fuel jets.
Lemme know what you guys think and if anyone wants run files I can email them.
First run
Fidanza Flywheel, Spec Stage 3 Clutch, Berk Intake, Greddy Catback
226.86 HP
227.76 TQ
84.89 Degrees and 36% Humidity
Second run
Above mods with 75 shot
296.66 HP
324.15 TQ
86.38 Degress and 36& Humidity
The second run was cut short at about 4800 RPMs. The car started to lean out and I didnt have any jets to up the fuel. The dyno guy was very confident id easily be over 300 hp and 330 tq once I adjust the fuel jets.
Lemme know what you guys think and if anyone wants run files I can email them.
#3
Originally Posted by 95BLKMAX
dude, those are some great #s but they could be SO much better with a set of headers. Uncork that beast.... even more.
Congrats!
Congrats!
Thanks, I am hoping with some bigger fuel jets ill be around 310 hp and 330 tq.
Thread
Thread Starter
Forum
Replies
Last Post
CAN-Toronto FS: Basement cleaning
knight_yyz
5th Generation Classifieds (2000-2003)
12
11-01-2015 01:34 PM