FS: 440RC Injectors
FS: 440RC Injectors
I got my 440cc RC injectors for sale, asking $220 Shipped to US, They do not have o-rings, just use ur stock ones.
We all know RC injectors dont go in all the way in the manifold, so one day I tried experimenting and shaved off a lil bit of the outside material to see if it would fit, i shaved off very little and realized it was not going to work. It has absolutely no effect on how the injector performs, they are in good condition however like any injectors, I recommend you have them cleaned up before putting them on. I just took these off this morning since I was having rich idle problems(thinking it was bad injector, it turned out to be the o ring was blocking the tip of an injector (Do not double up on the O rings! lol. I learned the hard way. Just one one oring)
http://www.abdalafer.com/streetz/FILE0088.JPG
http://www.abdalafer.com/streetz/FILE0089.JPG
Turns out the rich idle issue i had was not even the o rings, it was the tps. I am having same problem with my new injectors, i still dont recommend to double up on the o-rings.
We all know RC injectors dont go in all the way in the manifold, so one day I tried experimenting and shaved off a lil bit of the outside material to see if it would fit, i shaved off very little and realized it was not going to work. It has absolutely no effect on how the injector performs, they are in good condition however like any injectors, I recommend you have them cleaned up before putting them on. I just took these off this morning since I was having rich idle problems(thinking it was bad injector, it turned out to be the o ring was blocking the tip of an injector (Do not double up on the O rings! lol. I learned the hard way. Just one one oring)
http://www.abdalafer.com/streetz/FILE0088.JPG
http://www.abdalafer.com/streetz/FILE0089.JPG
Turns out the rich idle issue i had was not even the o rings, it was the tps. I am having same problem with my new injectors, i still dont recommend to double up on the o-rings.
Last edited by streetzlegend; Nov 14, 2009 at 11:45 PM.
Because I am taking this opportunity (now that i have them off) to install the DW 600CC injectors I have on the way via UPS. No b.s'sing here or anything, they work. If i thought the injectors were in bad condition I wouldnt like for another fellow Org'er to be dealing with headaches (I know how it feels).
I wish you would have contacted me, I have a shop that does injectors,
they shave the bodies and flow test them as well or bore them out.
They can autally bore out the 440s to 600 as well.
But good luck with the sale
good seller !
they shave the bodies and flow test them as well or bore them out.
They can autally bore out the 440s to 600 as well.
But good luck with the sale
good seller !
Thread
Thread Starter
Forum
Replies
Last Post
jmlee44
4th Generation Maxima (1995-1999)
8
Oct 2, 2022 02:13 PM