300z caliper/cobra bbk brackets on sale again!
I'll post the update here also. I'm only selling the brackets and not the rings as they are no longer required (if you buy the rotors properly redrilled)
Edited March 2008'
Sorry for the long delay fellas. I originally supplied this kit with the brackets and centering rings for the rotor. The rings centered the rotor if you didn't have the Cobra rotor redrilled to the Nissan stud size. I couldn't find a place to make the rings anymore so I'm deleting them from the kit.
Good news = makes the kit price cheaper. Brackets are $60 shipped via usps priority (48 states and sometimes canada)
Bad News = You have to use Cobra rotors that are redrilled. FORTUNATELY Automax offers the rotors redrilled. (also slotted, Xdrilled or dimpled). He also sells the SS lines and pads.
http://forums.maxima.org/showthread.php?t=281773
If you need some great instructions on how to install these parts, look here.
http://forums.maxima.org/showthread.php?t=351406
The post is for the Q45/J30 calipers but the instructions are the same. Take note to the hardware specifications (nuts/bolts). I would also add that you need to make sure the nuts/bolts are the same strength grade or better than the oem units you have now.
For those of you that have 2000+ year maximas, you can still use these brackets. BUT you have to enlarge one set of bracket holes to the next size to fit your larger oem brake bolts.
Brackets are $60 / set. Price includes shipping and paypal fees. Paypal is "Jeff_Iwata@yahoo.com". Tell me who you are, what you are buying and where to send it.
I got 20 sets done and I'm informing all PM people 1st. But I'm going to put this exact same message in the for sale sections also. I got more than 20 PMs regarding these so these might sell out again.
I hope I answered all your questions.
Jeff92se
You will need to buy the rotors/calipers/mounting hardware and ss conversion lines. But in total, you should be able to do this conversion for about $500. Not bad
If you don't already know, the brackets/rings allow you to use the 300zx 4 piston front caliper and the Ford Cobra 13" rotor. The improvement in braking power is greatly increased. Fade is a non-issue now.
Threads for reference:
http://forums.maxima.org/showthread.php?t=402326
Info:
http://forums.maxima.org/showthread.php?t=390513
Sorry for the long delay fellas. I originally supplied this kit with the brackets and centering rings for the rotor. The rings centered the rotor if you didn't have the Cobra rotor redrilled to the Nissan stud size. I couldn't find a place to make the rings anymore so I'm deleting them from the kit.
Good news = makes the kit price cheaper. Brackets are $60 shipped via usps priority (48 states and sometimes canada)
Bad News = You have to use Cobra rotors that are redrilled. FORTUNATELY Automax offers the rotors redrilled. (also slotted, Xdrilled or dimpled). He also sells the SS lines and pads.
http://forums.maxima.org/showthread.php?t=281773
If you need some great instructions on how to install these parts, look here.
http://forums.maxima.org/showthread.php?t=351406
The post is for the Q45/J30 calipers but the instructions are the same. Take note to the hardware specifications (nuts/bolts). I would also add that you need to make sure the nuts/bolts are the same strength grade or better than the oem units you have now.
For those of you that have 2000+ year maximas, you can still use these brackets. BUT you have to enlarge one set of bracket holes to the next size to fit your larger oem brake bolts.
Brackets are $60 / set. Price includes shipping and paypal fees. Paypal is "Jeff_Iwata@yahoo.com". Tell me who you are, what you are buying and where to send it.
I got 20 sets done and I'm informing all PM people 1st. But I'm going to put this exact same message in the for sale sections also. I got more than 20 PMs regarding these so these might sell out again.
I hope I answered all your questions.
Jeff92se
You will need to buy the rotors/calipers/mounting hardware and ss conversion lines. But in total, you should be able to do this conversion for about $500. Not bad
If you don't already know, the brackets/rings allow you to use the 300zx 4 piston front caliper and the Ford Cobra 13" rotor. The improvement in braking power is greatly increased. Fade is a non-issue now.
Threads for reference:
http://forums.maxima.org/showthread.php?t=402326
Info:
http://forums.maxima.org/showthread.php?t=390513
Supporting Maxima.org Member
Joined: Nov 2001
Posts: 517
From: Florida
ok sorry for my ignorance, but I right now have Z32 calipers, and lines already. if i buy the brackets couldnt i use them on my 2000 maxima rotors? or do i absolutely need the cobra rotors?
These were designed around the Cobra 13" rotor and this rotor only. Won't fit with anything else.
I just sold another set. I just checked and have THREE sets left before I have to get more made. Avoid the wait and order now.
$60 shipped. Just the brackes are for sale now. "Jeff_Iwata@yahoo.com" is the paypal.
$60 shipped. Just the brackes are for sale now. "Jeff_Iwata@yahoo.com" is the paypal.
I spoke to my machine shop and they are done. I just have to find time to grab and pay for them. So I'll start accecpting paypal payments now.
"Jeff_Iwata@yahoo.com" $60 shipped is the price.
Let me know, who you are what you are buying and where to send them.
Thanks
Jeff
"Jeff_Iwata@yahoo.com" $60 shipped is the price.
Let me know, who you are what you are buying and where to send them.
Thanks
Jeff
I already have the old 13" rotors without properly drilled stud holes. Does anyone have any idea how much it would cost to have them redrilled at a machine shop? Would it simply be cheaper to just buy new ones pre-drilled to Nissan spec?
I spoke to my machine shop and they are done. I just have to find time to grab and pay for them. So I'll start accecpting paypal payments now.
"Jeff_Iwata@yahoo.com" $60 shipped is the price.
Let me know, who you are what you are buying and where to send them.
Thanks
Jeff
"Jeff_Iwata@yahoo.com" $60 shipped is the price.
Let me know, who you are what you are buying and where to send them.
Thanks
Jeff
Couple of posts up.....
the rear were sand blased and done the same to match..
No Nissan or Brembo logos going on.
or you can try and located yourself some CTS-V caddy Brembo, all 4 of them are polished finshed or I belive Silver and used 14 inch rotors
Thanks,
Mrkanda
