PANTRY sale.lol Philly Pa
ES sent me the wrong control arm bushing sleeves
(twice) They will be shipping out the right ones soon
(Refurbished)Control arm set will be $225
They will come with New after market ball joints, ES bushings & will be coated with rubberized undecoating
(twice) They will be shipping out the right ones soon(Refurbished)Control arm set will be $225
They will come with New after market ball joints, ES bushings & will be coated with rubberized undecoating
Last edited by accordingtou; Oct 15, 2009 at 07:27 PM.
Bump.
I just found a great deal on parts & supplies needed to refurbish the control arms.. so I decided to pass the savings on to you.
New price is $225 per set for (95-99) front lower control arms.
I also have ES torque mounts on the way (will fit 99-03 Manual & Auto)
Will also be providing these services to more generations in near future
I just found a great deal on parts & supplies needed to refurbish the control arms.. so I decided to pass the savings on to you.
New price is $225 per set for (95-99) front lower control arms.
I also have ES torque mounts on the way (will fit 99-03 Manual & Auto)
Will also be providing these services to more generations in near future
Lol. Most people call them the front & rear motor mounts, but they are actually tq mounts. These tq mounts are attached to the crossmember.
Pic's should explain it better.
Here are the ES bushings
Blown stock mount
Rear tq mounts:
Top= blown place racing mount
Bottom= ES tq mount (not cracking, I sprayed it with rubberized undercoating)
Pic's should explain it better.
Here are the ES bushings
Blown stock mount
Rear tq mounts:
Top= blown place racing mount
Bottom= ES tq mount (not cracking, I sprayed it with rubberized undercoating)
Last edited by accordingtou; Jun 2, 2011 at 06:33 AM.
Just finished another set of 95-99 ctrl arms. These arms were primed, painted black & come with MOOG ball joints $235 SOLD
Last edited by accordingtou; Dec 11, 2009 at 07:46 PM.
This thread has been updated on 6/7/2011
(3) stock maf sensors 95-99 $35 each.
(3) 3.0 crankshaft pulley $45
3" high flow cat. works perfect (no cel) needs flanges $50
3" hig flow cat magnaflow. works perfect has flanges (3 bolt) $90
3" Warpspeed supercharger y pipe with wide band o2 bung. (3 bolt flange) $200
New 350z hr head gaskets. $100
used Stevenmax cam adapters $75
used Deboloz cams (have scoring on journals). $500
used Jwt valve springs $150
used arp head studs $100
used arp main bolts $80
3.5 heads minus cams perfect for rebuild $125
3.5 heads minus cams need to be cleaned $175
Used clutch kit: $200 with Less than 1000 miles, setup held 300+hp (8psi on pfi kit) with no problem
Stock flywheel
Act street disk
Spec 2 pressure plate
(3) stock maf sensors 95-99 $35 each.
(3) 3.0 crankshaft pulley $45
3" high flow cat. works perfect (no cel) needs flanges $50
3" hig flow cat magnaflow. works perfect has flanges (3 bolt) $90
3" Warpspeed supercharger y pipe with wide band o2 bung. (3 bolt flange) $200
New 350z hr head gaskets. $100
used Stevenmax cam adapters $75
used Deboloz cams (have scoring on journals). $500
used Jwt valve springs $150
used arp head studs $100
used arp main bolts $80
3.5 heads minus cams perfect for rebuild $125
3.5 heads minus cams need to be cleaned $175
Used clutch kit: $200 with Less than 1000 miles, setup held 300+hp (8psi on pfi kit) with no problem
Stock flywheel
Act street disk
Spec 2 pressure plate
This thread has been updated on 6/26/2011
(1) vq35 ssim $150
(3) stock maf sensors 95-99 $35 each.
(3) 3.0 crankshaft pulley $45
3" high flow cat. works perfect (no cel) needs flanges $50
3" hig flow cat magnaflow. works perfect has flanges (3 bolt) $90
3" Warpspeed supercharger y pipe with wide band o2 bung. (3 bolt flange) $200
New 350z hr head gaskets. $100
used Stevenmax cam adapters $75
used Deboloz cams (have scoring on journals). $500
used Jwt valve springs $150
used arp head studs $100
used arp main bolts $80
3.5 heads minus cams perfect for rebuild $125
3.5 heads minus cams need to be cleaned $175
Used clutch kit: $200 with Less than 1000 miles, setup held 300+hp (8psi on pfi kit) with no problem
Stock flywheel
Act street disk
Spec 2 pressure plate
Refurbished (by cardone) nissan mastercylinder $50
95 5spd ecu $60
Aluminium Autovation pedal set $50
Fidanza flywheel $100 comes with old friction disk and hardware, but i recomend sending it to fidanza so they can install proper insert.
b&m shift ****$20
hks ign amp $100
j&s $350
Aerocatch hood fastner flush fitment $75
vlsd driver side axle $50
200w jensen amp $30
brand new tial waste gate spring $10
(1) vq35 ssim $150
(3) stock maf sensors 95-99 $35 each.
(3) 3.0 crankshaft pulley $45
3" high flow cat. works perfect (no cel) needs flanges $50
3" hig flow cat magnaflow. works perfect has flanges (3 bolt) $90
3" Warpspeed supercharger y pipe with wide band o2 bung. (3 bolt flange) $200
New 350z hr head gaskets. $100
used Stevenmax cam adapters $75
used Deboloz cams (have scoring on journals). $500
used Jwt valve springs $150
used arp head studs $100
used arp main bolts $80
3.5 heads minus cams perfect for rebuild $125
3.5 heads minus cams need to be cleaned $175
Used clutch kit: $200 with Less than 1000 miles, setup held 300+hp (8psi on pfi kit) with no problem
Stock flywheel
Act street disk
Spec 2 pressure plate
Refurbished (by cardone) nissan mastercylinder $50
95 5spd ecu $60
Aluminium Autovation pedal set $50
Fidanza flywheel $100 comes with old friction disk and hardware, but i recomend sending it to fidanza so they can install proper insert.
b&m shift ****$20
hks ign amp $100
j&s $350
Aerocatch hood fastner flush fitment $75
vlsd driver side axle $50
200w jensen amp $30
brand new tial waste gate spring $10
