FS: Complete Jeff92se Front Big Brake Kit (Z32 Calipers / 13" Cobra Rotors)
#1
Supporting Maxima.org Member
Thread Starter
iTrader: (15)
Join Date: Oct 2004
Location: my garage
Posts: 2,220
FS: Complete Jeff92se Front Big Brake Kit (Z32 Calipers / 13" Cobra Rotors)
Well, I've decided that I want to sell my front bbk. I love the big brakes, but they're just too much of a pita to deal with. I use my maxima as a dd and and I want to take it to the drag strip every once in a while. I don't do any type of racing that would require a bbk. I have to remove the front bbk to install slicks or my winter saw blades...
The kit comes with Z32 300ZX aluminum 30mm calipers, 13" Cobra rotors, braided SS brake lines, Jeff92se caliper relocation brackets, rotor centering rings, and all hardware. That's everything that you'll need except brake fluid and large wheels.
This kit will bolt on to 3rd and 4th gens. It will bolt on to 5th gens if one set of holes on each relocation bracket is enlarged.
I'm not exactly sure how many miles are on these brakes. They were in great condition when I bought the car from Jeff92se. I've only put about 20k miles on the car since I bought it. When I first bought the car, the calipers were polished and painted with clear coat. After a while, the clear coat started pealing off and the aluminum began to oxidize. I painted them with high temp satin black and block sanded the nissan letters. They could easily be polished again since they have been polished before.
The rotors are in good shape but they aren't perfect. They have very shallow grooves, but are nothing to be concerned with. They are not warped. The pads have some life left, but I'd suggest getting some better pads because they are cheap.
******SOLD******
Feel free to PM me with any other questions.
The kit comes with Z32 300ZX aluminum 30mm calipers, 13" Cobra rotors, braided SS brake lines, Jeff92se caliper relocation brackets, rotor centering rings, and all hardware. That's everything that you'll need except brake fluid and large wheels.
This kit will bolt on to 3rd and 4th gens. It will bolt on to 5th gens if one set of holes on each relocation bracket is enlarged.
I'm not exactly sure how many miles are on these brakes. They were in great condition when I bought the car from Jeff92se. I've only put about 20k miles on the car since I bought it. When I first bought the car, the calipers were polished and painted with clear coat. After a while, the clear coat started pealing off and the aluminum began to oxidize. I painted them with high temp satin black and block sanded the nissan letters. They could easily be polished again since they have been polished before.
The rotors are in good shape but they aren't perfect. They have very shallow grooves, but are nothing to be concerned with. They are not warped. The pads have some life left, but I'd suggest getting some better pads because they are cheap.
******SOLD******
Feel free to PM me with any other questions.
Last edited by 505max94se; 04-05-2010 at 10:06 PM.
#8
Supporting Maxima.org Member
Thread Starter
iTrader: (15)
Join Date: Oct 2004
Location: my garage
Posts: 2,220
You could buy it as a whole and sell the calipers and brackets.
Last edited by 505max94se; 03-05-2010 at 01:07 PM.
#22
..505 you can still trade me for the 4piston wilwood kit that DOES fit under the 15" BBS mesh wheels...
JUST THROWING IT OUT THERE....
You scratch my car, I scratch yours... (that was lame attempt at being witty)
JUST THROWING IT OUT THERE....
You scratch my car, I scratch yours... (that was lame attempt at being witty)
Thread
Thread Starter
Forum
Replies
Last Post
03VQMAX
7th Generation Classifieds (2009-2015)
2
09-25-2015 04:19 PM
RealityCheck
4th Generation Maxima (1995-1999)
2
08-05-2015 06:18 AM