General Maxima Accessories (All Generations) Parts and accessories relevant to all generations of Maximas.

NC FS: Quiafe'd trans, injectors, misc, parts will be added keep checking

Thread Tools
 
Search this Thread
 
Old Mar 22, 2011 | 07:07 PM
  #1  
Crusher103's Avatar
Thread Starter
Senior Member
iTrader: (10)
 
Joined: Sep 2004
Posts: 54,042
From: Dur-ham NC
FS: Quiafe'd trans, injectors, misc, parts will be added keep checking

Decided to move things to one thread keep clutter down and less things to keep up with. Ask questions here. I am open to offers but be reasonable, use your head i will make fun of you for stupid questions.

My trans:

First and foremost. This is NOT an easy to use transmission. It is notchy and difficult to find gears. I have driven built hondas, 350Z, RX7 the list goes on and this is one of the most difficult transmission i have come across. For this reason i have opted to stick with my 5spd VLSD trans because i need a trans to use comfortably as a DD.

It really pains me to have to do this but I cannot use this transmission and i dont have room to store it nor the time and facilities to pop it on and off when want.

$1000/obo: Its a re-shimmed, Quaife'd 5spd. Mileage is unknown(it cant be over 100K since it the diff was installed). From what i have been told it was very rarely beat on or abused.

Trades+500 for stock trans flywheel/clutch are also welcome, I will include a Fidanza LW flywheel and a ACT 6 puck sprung clutch with a HD pressure plate, the setup is good to 463ft lbs. No slipping/worn&scored clutches/flywheel i will still trade but you will have to add more cash to compensate.


PFI feedpipe&downpipe(t4 flanges): SOLD: Its been on the car awhile, no leaks. im not using it because my car is slammed and i would have clearance issues. Great for people only looking for mild lowering.

370 sidefeed injectors: SOLD: work perfectly i have an SSIM on my 3.0 and it uses top feeds thats the only reason im not using these.


Synapse BOV(no flange): SOLD: Less then 3K miles on it, perfectly working, it use to be on my friend's S2000, i have opted to stick with my SSQV. Flanges go on ebay for $20 all day.


Stock VQ35 injectors WITH clips: $70+shipping
I used these for a little on both my VQ35 and VQ30 they have about 72K on them work perfectly no issues what so ever. They are just too small for my current needs.

MEVI: SOLD
The now rare MEVI, i have no use for it as im using an SSIM. In perfectly working condition.

Apexi 2.5" WS2 Rear section:SOLD, STOP PMING ME ABOUT THE MUFFLER IT IS SOLD
I had a WS2 catback but Apexi used cheap piping and it eventually rusted and broke. the Actual muffler thou is still in very good shape. It is EXCELLENT in keeping noise down. i had a test pipe and y-pipe on my car people could only tell by the smell. Very quiet and very mellow.


OEM 4th gen Spoiler: SOLD
An OEM spoiler off a 95 in black. Im not going to use it so if anybody else needs a spoiler.


97-99 Maxima Headlights: SOLD
Only exception to what i posted earlier, i have had these stupid things for about 4 years, they dont fit on an I30 so i have no use for them just make me a damn offer on them i want them gone. They are perfect for a back up set of headlights for retros.


350Z seats: SOLD

Shorty headers and modified Y-pipe: SOLD

Side exit 2.5" Exhaust(95-96): SOLD

Thanks for looking.

Last edited by Crusher103; Dec 10, 2011 at 08:22 PM.
Old Mar 22, 2011 | 07:11 PM
  #2  
VQ'rInWLA's Avatar
Senior Member
iTrader: (83)
 
Joined: May 2010
Posts: 12,655
From: West Los Doin Tha Most
Try MaxJammin for the WS2. Hes looking for a muffler. Ill forward him here.
Old Mar 22, 2011 | 07:13 PM
  #3  
Crusher103's Avatar
Thread Starter
Senior Member
iTrader: (10)
 
Joined: Sep 2004
Posts: 54,042
From: Dur-ham NC
cool thanks
Old Mar 23, 2011 | 07:19 AM
  #4  
99greddymax's Avatar
Senior Member
iTrader: (7)
 
Joined: Aug 2010
Posts: 691
From: Bloomington Ca
sucks you dont ship :/
Old Mar 23, 2011 | 10:25 AM
  #5  
Crusher103's Avatar
Thread Starter
Senior Member
iTrader: (10)
 
Joined: Sep 2004
Posts: 54,042
From: Dur-ham NC
Some of these items are just too big to ship and the price of shipping will be through the roof. You can arrange to have a company pick them up, im not against that but i really dont want to have anything to do with shipping very large items, i have already lost over $400 shipping the more weighty and massive items(damage/faulty postage calculations/general mix ups).
Old Mar 24, 2011 | 01:10 AM
  #6  
MaxJammin's Avatar
Senior Member
 
Joined: Oct 2010
Posts: 421
From: Connecticut
any pics and/or sound clip of the WS2? im interested but i want it kinda loud
Old Apr 10, 2011 | 07:52 AM
  #7  
Crusher103's Avatar
Thread Starter
Senior Member
iTrader: (10)
 
Joined: Sep 2004
Posts: 54,042
From: Dur-ham NC
nobody wants anything else?
Old Apr 25, 2011 | 05:30 PM
  #8  
SHIFT_maxMD's Avatar
Member
iTrader: (3)
 
Joined: May 2009
Posts: 278
From: Rockville, MD
i would love the seats but I'd have to find the time to drive down there...
Old Apr 25, 2011 | 05:32 PM
  #9  
Crusher103's Avatar
Thread Starter
Senior Member
iTrader: (10)
 
Joined: Sep 2004
Posts: 54,042
From: Dur-ham NC
Originally Posted by SHIFT_maxMD
i would love the seats but I'd have to find the time to drive down there...
Id be willing to drive to richmond, PM me, i can get you some pics and etc.
Old May 3, 2011 | 04:52 AM
  #10  
t6378tp's Avatar
Turbo 3.5
iTrader: (69)
 
Joined: Dec 2005
Posts: 7,785
From: Philly
I know someone that may take that pfi setup but naturally you would have to ship it
Old May 3, 2011 | 07:27 AM
  #11  
Crusher103's Avatar
Thread Starter
Senior Member
iTrader: (10)
 
Joined: Sep 2004
Posts: 54,042
From: Dur-ham NC
i can try shipping it, the box will be enormous thou so the cost of shipping will be high.
Old May 4, 2011 | 08:13 PM
  #12  
t6378tp's Avatar
Turbo 3.5
iTrader: (69)
 
Joined: Dec 2005
Posts: 7,785
From: Philly
I'll asked them
Old May 20, 2011 | 05:28 PM
  #13  
Crusher103's Avatar
Thread Starter
Senior Member
iTrader: (10)
 
Joined: Sep 2004
Posts: 54,042
From: Dur-ham NC
bump.
Old May 21, 2011 | 12:03 AM
  #14  
SpeedCrazie's Avatar
Supporting Maxima.org Member
iTrader: (81)
 
Joined: Apr 2002
Posts: 2,281
Take it no luck on it?
Old May 21, 2011 | 06:00 AM
  #15  
Crusher103's Avatar
Thread Starter
Senior Member
iTrader: (10)
 
Joined: Sep 2004
Posts: 54,042
From: Dur-ham NC
it finally ended up back on my doorstep, i dunno what to say about it.
Old May 21, 2011 | 10:00 AM
  #16  
SpeedCrazie's Avatar
Supporting Maxima.org Member
iTrader: (81)
 
Joined: Apr 2002
Posts: 2,281
Give it another go around??
Old May 29, 2011 | 07:38 AM
  #17  
Crusher103's Avatar
Thread Starter
Senior Member
iTrader: (10)
 
Joined: Sep 2004
Posts: 54,042
From: Dur-ham NC
bump.
Old May 30, 2011 | 04:39 AM
  #18  
phatboislim's Avatar
Senior Member
iTrader: (27)
 
Joined: Jan 2006
Posts: 5,160
love those seats but i have frost interior. free bump
Old Jul 10, 2011 | 05:30 PM
  #19  
Crusher103's Avatar
Thread Starter
Senior Member
iTrader: (10)
 
Joined: Sep 2004
Posts: 54,042
From: Dur-ham NC
bump again, i know somebody wants those seats.
Old Jul 11, 2011 | 09:30 AM
  #20  
max_speed97's Avatar
Senior Member
iTrader: (20)
 
Joined: May 2002
Posts: 2,095
By chance, do you have a battery relocation kit?
Old Jul 11, 2011 | 04:11 PM
  #21  
Crusher103's Avatar
Thread Starter
Senior Member
iTrader: (10)
 
Joined: Sep 2004
Posts: 54,042
From: Dur-ham NC
The one i have im using.
Old Jul 14, 2011 | 07:13 PM
  #22  
kbcnd's Avatar
Member
iTrader: (2)
 
Joined: Aug 2010
Posts: 188
From: Arlington, TX
Are the seats plug and play?
Old Jul 20, 2011 | 07:42 PM
  #23  
maxxxdout's Avatar
Senior Member
iTrader: (4)
 
Joined: Mar 2010
Posts: 503
From: landofmakebelieve,nj
thoses headers and y pipe still avail??
Old Aug 14, 2011 | 06:46 PM
  #24  
J2FRESH's Avatar
Banned
iTrader: (8)
 
Joined: Aug 2009
Posts: 2,726
From: Long Beach, CA/Las Vegas, NV/Oklahoma City, OK
detailed pics of apexi & shipping quote to 90723 please
Old Aug 14, 2011 | 07:04 PM
  #25  
Crusher103's Avatar
Thread Starter
Senior Member
iTrader: (10)
 
Joined: Sep 2004
Posts: 54,042
From: Dur-ham NC
...

Last edited by Crusher103; Oct 5, 2011 at 07:26 AM.
Old Aug 14, 2011 | 09:34 PM
  #26  
J2FRESH's Avatar
Banned
iTrader: (8)
 
Joined: Aug 2009
Posts: 2,726
From: Long Beach, CA/Las Vegas, NV/Oklahoma City, OK
sounds good man shoot me your paypal
Old Aug 15, 2011 | 12:06 PM
  #27  
wirelessdude04's Avatar
Senior Member
iTrader: (24)
 
Joined: Dec 2006
Posts: 4,870
From: Philadelphia, PA
PFI stuff sell yet?
Old Aug 15, 2011 | 12:07 PM
  #28  
Crusher103's Avatar
Thread Starter
Senior Member
iTrader: (10)
 
Joined: Sep 2004
Posts: 54,042
From: Dur-ham NC
Originally Posted by wirelessdude04
PFI stuff sell yet?
Its still here you want it?
Old Aug 29, 2011 | 05:45 PM
  #29  
Crusher103's Avatar
Thread Starter
Senior Member
iTrader: (10)
 
Joined: Sep 2004
Posts: 54,042
From: Dur-ham NC
All this stuff is amazingly still here. It needs to go or most of it will just get thrown away. throw me n offer.
Old Aug 31, 2011 | 08:23 PM
  #30  
tsheffler's Avatar
Senior Member
iTrader: (3)
 
Joined: Mar 2010
Posts: 412
From: martinsburg wv
you have a z32 maf or clutch? or dek injector clips by chance?
Old Aug 31, 2011 | 08:35 PM
  #31  
Crusher103's Avatar
Thread Starter
Senior Member
iTrader: (10)
 
Joined: Sep 2004
Posts: 54,042
From: Dur-ham NC
i have a extra Z32 MAF. i have a clutch but its part of the trans deal. And i have some injector clips on some VQ35 injectors. I couldnt get the clips off so i just left them on there you, if you need some spare injectors.
Old Sep 12, 2011 | 02:32 PM
  #32  
Crusher103's Avatar
Thread Starter
Senior Member
iTrader: (10)
 
Joined: Sep 2004
Posts: 54,042
From: Dur-ham NC
People on Craiglist are eating this stuff up, if you want something you better get it. Transmission might be gone in another week, everything is first come first serve.
Old Sep 14, 2011 | 09:29 AM
  #33  
wirelessdude04's Avatar
Senior Member
iTrader: (24)
 
Joined: Dec 2006
Posts: 4,870
From: Philadelphia, PA
ugh just seen your not shipping
Old Sep 14, 2011 | 10:06 AM
  #34  
Crusher103's Avatar
Thread Starter
Senior Member
iTrader: (10)
 
Joined: Sep 2004
Posts: 54,042
From: Dur-ham NC
wat did you want, im definitely not shipping the seats or transmission.
Old Sep 14, 2011 | 02:03 PM
  #35  
SirDank's Avatar
Newbie - Just Registered
 
Joined: Aug 2009
Posts: 9
From: NC
maxima parts headlights and turbo

im trying to get some stuff but u havent called me back or replyd my text
whats the deal
Old Sep 16, 2011 | 02:22 PM
  #36  
Heero88's Avatar
Member
iTrader: (7)
 
Joined: Jun 2011
Posts: 218
From: Cali
Will that spoiler fit a 98 max ?? I really want to keep one on the car since i have nothing to cover the holes lol if so do u mind shipping and how much 93306
Old Sep 16, 2011 | 03:07 PM
  #37  
Crusher103's Avatar
Thread Starter
Senior Member
iTrader: (10)
 
Joined: Sep 2004
Posts: 54,042
From: Dur-ham NC
Originally Posted by Heero88
Will that spoiler fit a 98 max ?? I really want to keep one on the car since i have nothing to cover the holes lol if so do u mind shipping and how much 93306
im pretty sure it will.

shipping is $40
Old Sep 17, 2011 | 11:46 PM
  #38  
ctsnyper's Avatar
Junior Member
 
Joined: Jun 2010
Posts: 79
In regards to the MEVI, is it new? Used? How many miles on it? Is it the complete setup with the switch and vacuum canister etc. Pics? And shipping?
Old Sep 18, 2011 | 08:03 AM
  #39  
Crusher103's Avatar
Thread Starter
Senior Member
iTrader: (10)
 
Joined: Sep 2004
Posts: 54,042
From: Dur-ham NC
....

Last edited by Crusher103; Oct 5, 2011 at 07:26 AM.
Old Sep 18, 2011 | 08:21 PM
  #40  
augnon's Avatar
Member
 
Joined: Mar 2010
Posts: 242
From: Denver From Houston Lived in Boston
How much for the muffler shipped to 80010?



All times are GMT -7. The time now is 05:01 PM.