PA Getting out the Maxima Game Garage Sale
Getting out the Maxima Game Garage Sale
Ok, so after alot of back and forth I made up my mind and don't need a boosted G35 and Maxima. So with that said I am selling all my maxima parts and getting out the game and will focus on my G35 and Built V8 S10.
I don't have pic's for everything at this time but I can email or text pic's to you as needed or you can wait till I post them. If you need them now please email me at inzom@yahoo.com or text me at 215 280 7144. I am very easy to get ahold of and don't mind legit questions
Here is a list of stuff for now and I will add and update as I remember or dig it out will post price soon also:
brand new still in the box same side intercooler - 95obo
19inch rays - sold
full 00vi swap with bop and port matched uim and 4gen lim with 370cc side feed injectors installed with 2 extra injectors and a fuel rail adapter - sold
4gen/5.5gen bbk kit "5.5gen calipers, rotors and pads" - 95obo
"rotors and pads are brand new in the box"
4gen starter brand new with lift time auto zone warranty - 65obo
4gen a/c condenser, compressor and hard line - 65obo
black 4gen radio trim with a 7inch screen and jvc radio installed with a bose adapter harness - 175obo or 95 without the radio
4gen passanger side abs axle - 30obo
4gen oem front strut - 20bucks
and a crap load of sensors and etc - make me a offer
zex nitrous kit without a bottle - sold
used 5spd tob - 2bucks
oem 3.5 vac cans - 5bucks
will add more stuff as I remember
I don't have pic's for everything at this time but I can email or text pic's to you as needed or you can wait till I post them. If you need them now please email me at inzom@yahoo.com or text me at 215 280 7144. I am very easy to get ahold of and don't mind legit questions
Here is a list of stuff for now and I will add and update as I remember or dig it out will post price soon also:
brand new still in the box same side intercooler - 95obo
19inch rays - sold
full 00vi swap with bop and port matched uim and 4gen lim with 370cc side feed injectors installed with 2 extra injectors and a fuel rail adapter - sold
4gen/5.5gen bbk kit "5.5gen calipers, rotors and pads" - 95obo
"rotors and pads are brand new in the box"
4gen starter brand new with lift time auto zone warranty - 65obo
4gen a/c condenser, compressor and hard line - 65obo
black 4gen radio trim with a 7inch screen and jvc radio installed with a bose adapter harness - 175obo or 95 without the radio
4gen passanger side abs axle - 30obo
4gen oem front strut - 20bucks
and a crap load of sensors and etc - make me a offer
zex nitrous kit without a bottle - sold
used 5spd tob - 2bucks
oem 3.5 vac cans - 5bucks
will add more stuff as I remember
Last edited by t6378tp; Aug 25, 2011 at 04:07 PM.
btw willing to accept trades for the following items:
10gal fuel cell
1gal standup fuel cell
350z oil pan spacer
440cc top feed injectors
oil scavenger pump
same side intercooler
meth kit
5.8psi small green or 7.25 small blue tial wg spring
10gal fuel cell
1gal standup fuel cell
350z oil pan spacer
440cc top feed injectors
oil scavenger pump
same side intercooler
meth kit
5.8psi small green or 7.25 small blue tial wg spring
800 for the rims not really looking to ship but will at the buyers expense, willing to meet within reason
Wheel have no curb rash, front tires are new, rears will need to be replaced soon
Nismo the turbo system should fit a 5.5gen fine, I'll put the kit back on the spare motor and take some pics with a mockup 6spd starter
Sale pending on the 3inch exhaust
Will check some pics tonight of the maf adapter. Going to just get a custom charge pipe with the bov and maf housing welded in for the G. The maf adapter came from a injen cai kit but I had it tig welded to prevent leaks. It comes with only 4 tack welds which leaked under boost
Wheel have no curb rash, front tires are new, rears will need to be replaced soon
Nismo the turbo system should fit a 5.5gen fine, I'll put the kit back on the spare motor and take some pics with a mockup 6spd starter
Sale pending on the 3inch exhaust
Will check some pics tonight of the maf adapter. Going to just get a custom charge pipe with the bov and maf housing welded in for the G. The maf adapter came from a injen cai kit but I had it tig welded to prevent leaks. It comes with only 4 tack welds which leaked under boost
275 for the 00vi only thing else needed is the engine if I remember correctly. I have a dek tb with iacv and tbs, dek uim ported to match a 4gen lower, dek power rod bop, 4gen lim ported to match the dek uim and 370cc side feed injectors already installed with two extra, fuel rail adapter, bolts for the uim to lim, uim to lim gasket used thou, rear valve cover and coils.
guys I have alot of stuff, if you dont see it listed feel free to ask. Only thing I plan to keep is my bov, wg, turbo, walbro, aero afpr, zetronic datalogger and maybe my aem wbo2 and gauge
might sell either the datalogger or wbo2 and just get a cipher tool and datalogg with that instead and use whatever I keep for my truck
might sell either the datalogger or wbo2 and just get a cipher tool and datalogg with that instead and use whatever I keep for my truck
forgot to add the intercooler is brand new never even took it out the box. Here is a link to the intercooler and specs
http://cgi.ebay.com/ebaymotors/Unive...Q5fAccessories
http://cgi.ebay.com/ebaymotors/Unive...Q5fAccessories








Have done business with him twice with not a single hitch.