General Maxima Discussion This a general area for Maxima discussions for all years. For more specific questions, visit one of the generation-specific forums.

Quick AGX question...

Thread Tools
 
Search this Thread
 
Old 11-09-2002, 01:18 PM
  #1  
Supporting Maxima.org Member
Thread Starter
iTrader: (4)
 
Vyrus's Avatar
 
Join Date: Jul 2001
Posts: 6,443
Quick AGX question...

Do all of you guys' rear adjustment ***** point inwards towards the center of the car? Reason being that it's a pain to adjust because I can't even see the numbers. Do most of you guys just jack it up to adjust that?
Thanks,
-Cyrus
Vyrus is offline  
Old 11-09-2002, 01:31 PM
  #2  
Member
iTrader: (1)
 
maxi98's Avatar
 
Join Date: Sep 2000
Posts: 93
inward toward the center of car, just lay on the ground, pinch ur head under the car (assuming ur head is not too big), look @ the **** and turn, very easy (again, assuming ur car is not slammed to the ground)
maxi98 is offline  
Old 11-09-2002, 01:33 PM
  #3  
Supporting Maxima.org Member
Thread Starter
iTrader: (4)
 
Vyrus's Avatar
 
Join Date: Jul 2001
Posts: 6,443
Originally posted by maxi98
inward toward the center of car, just lay on the ground, pinch ur head under the car (assuming ur head is not too big), look @ the **** and turn, very easy (again, assuming ur car is not slammed to the ground)
Dammit this is hard for me since I'm riding on cut Sprints now. Oh well, BTW fellas I got a coil cut off the rear and the car is almost even (very hard to tell it's not), very HOT ladies and gentlemen.
-Cyrus
Vyrus is offline  
Old 11-09-2002, 01:45 PM
  #4  
Senior Member
iTrader: (18)
 
Nismo's Avatar
 
Join Date: Dec 2000
Location: CA
Posts: 8,751
Originally posted by Vyrus

Dammit this is hard for me since I'm riding on cut Sprints now. Oh well, BTW fellas I got a coil cut off the rear and the car is almost even (very hard to tell it's not), very HOT ladies and gentlemen.
-Cyrus
dont complain, us Koni guys have to completely dissasemble the whole thing to adjust
Nismo is offline  
Old 11-09-2002, 01:51 PM
  #5  
Supporting Maxima.org Member
Thread Starter
iTrader: (4)
 
Vyrus's Avatar
 
Join Date: Jul 2001
Posts: 6,443
Originally posted by Nismo


dont complain, us Koni guys have to completely dissasemble the whole thing to adjust
That must really suck! And I was about to buy Konis too, that God people persuaded me into the AGXs...
-Cyrus
Vyrus is offline  
Old 11-09-2002, 02:16 PM
  #6  
Supporting Maxima.org Member
iTrader: (1)
 
xHypex's Avatar
 
Join Date: Aug 2000
Location: TX
Posts: 2,365
My dials face out

Makes it much easier to adjust.
-hype
xHypex is offline  
Old 11-09-2002, 11:07 PM
  #7  
Supporting Maxima.org Member
iTrader: (5)
 
JerseyMaxima's Avatar
 
Join Date: Apr 2002
Posts: 759
Mine are pointed inward toward the center of the car, I can see the ****, since I have dropzone springs which is a 1.6 drop. "They" said it was a 2 inch drop but anyway...I can see the adjust **** without having to jack up...
I am better off so when I get a BK, I won't scrape at every speed bump
JerseyMaxima is offline  
Old 11-10-2002, 12:29 PM
  #8  
Senior Member
iTrader: (9)
 
BrianV's Avatar
 
Join Date: Sep 2000
Posts: 3,597
I use a mirror which I have in my car (my car is too low to get my head under there to see. I simply throw the small mirror under there, adjust it, look at the mirror again until I got it on the right number. Unfortunately, I have to use the mirror in my right hand and use my right hand to adjust the **** (left hand can't get around to the other side. Thus, that's why I need to use the mirror, then adjust, then use the mirror to check if I went the right way.
BrianV is offline  
Old 11-10-2002, 12:42 PM
  #9  
Supporting Maxima.org Member
Thread Starter
iTrader: (4)
 
Vyrus's Avatar
 
Join Date: Jul 2001
Posts: 6,443
Originally posted by BrianV
I use a mirror which I have in my car (my car is too low to get my head under there to see. I simply throw the small mirror under there, adjust it, look at the mirror again until I got it on the right number. Unfortunately, I have to use the mirror in my right hand and use my right hand to adjust the **** (left hand can't get around to the other side. Thus, that's why I need to use the mirror, then adjust, then use the mirror to check if I went the right way.
Wow that's a great idea... I'm going to go put a mirror in my car right now.
-Cyrus
Vyrus is offline  
Old 11-10-2002, 12:50 PM
  #10  
Senior Member
iTrader: (9)
 
BrianV's Avatar
 
Join Date: Sep 2000
Posts: 3,597
Originally posted by Vyrus

Wow that's a great idea... I'm going to go put a mirror in my car right now.
-Cyrus
That's why I get paid the big bucks.

Actually the mirro I use is my broadway rear-view mirror

It clamps on and off in seconds and works quite well.
BrianV is offline  
Old 11-10-2002, 12:54 PM
  #11  
Supporting Maxima.org Member
Thread Starter
iTrader: (4)
 
Vyrus's Avatar
 
Join Date: Jul 2001
Posts: 6,443
Originally posted by BrianV


That's why I get paid the big bucks.

Actually the mirro I use is my broadway rear-view mirror

It clamps on and off in seconds and works quite well.
Yeah it doesn't look like I have one small enough in the house. Maybe I'll just buy one of those, I saw an ad for them like $20 somewhere. Let me see...
-Cyrus
Vyrus is offline  
Old 11-10-2002, 01:12 PM
  #12  
Senior Member
iTrader: (9)
 
BrianV's Avatar
 
Join Date: Sep 2000
Posts: 3,597
Originally posted by Vyrus

Yeah it doesn't look like I have one small enough in the house. Maybe I'll just buy one of those, I saw an ad for them like $20 somewhere. Let me see...
-Cyrus
goto the supermarket and buy a women's compact, that should be perfect size.
BrianV is offline  
Old 11-10-2002, 01:14 PM
  #13  
Supporting Maxima.org Member
Thread Starter
iTrader: (4)
 
Vyrus's Avatar
 
Join Date: Jul 2001
Posts: 6,443
Originally posted by BrianV


goto the supermarket and buy a women's compact, that should be perfect size.
<-- The cashier's face. Not a bad idea tho, I'm off the to the supermarket soon enough.
-Cyrus
Vyrus is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
maxima-junky
4th Generation Classifieds (1995-1999)
1
10-07-2015 06:13 PM
NewMax03
Maximas for Sale / Wanted
2
10-07-2015 08:27 AM
JakeOfAllTrades
7th Generation Maxima (2009-2015)
6
10-05-2015 10:40 AM



Quick Reply: Quick AGX question...



All times are GMT -7. The time now is 11:42 AM.