****PICS!**** IONIC DYNAMICS Body Kit (Rear & Sides)w/Stillen Front Lip! w/MY HOW-TO
****PICS!**** IONIC DYNAMICS Body Kit (Rear & Sides)w/Stillen Front Lip! w/MY HOW-TO
I installed the IONIC DYNAMICS Body Kit Side Skirts and Two-Piece Rear Valance. I already had the STILLEN Front Lip.
First of all I would like to say I’m very, very pleased w/the quality and engineering of the IONIC DYNAMICS kit pieces, to be fiberglass they are of excellent quality, thickness, and overall fitment. I chose this kit because of the very economical price and the “sharp” angle of the kit really compliments my Mitsubishi Galant GTZ Trunk Spoiler. My Maxima is not lowered so I do not ever have to worry about scraping it on anything. The Stillen kit still looks really good but “everyone” has the Stillen kit. Greg from CustomMaxima.com called me about doing the Skyline body kit and dual exhaust for his upcoming ad but I kindly declined because I would have had to drive my car 16 hours from Georgia to Connecticut to get the and the kit is too aggressive for me. And with any aftermarket body kit front bumper replacement you can only use the top billet grill you cannot use the bottom billet grill. And I have both top and bottom billet grills and I really like the look of my front end w/the Stillen front lip. The Sarona is a nice kit too but w/so many quality control, and fitment problems I went away from it. Also I have read many bad posts/threads about the bad fitment and quality of the Skyline kit and the Sarona kit. I have not seen any bad posts about the Ionic Dynamics kit as far as quality of the fiberglass or fitment. I have seen many posts on how most people don’t like the design and how it looks. In my opinion out of all the kits the IONIC DYNAMICS kit is the right compliment to the Maxima besides the Stillen or Sarona kit if you are going for the “smooth” not-to-aggressive-look and at it’s economical price and “ease” of installation it is hard to beat. Also these skirts are wider and extend down the body of the car more than the Stillen kit which to me gives the Maxima more “wide-body” appeal. IONIC DYNAMICS now has a Full body Kit at a very reasonable price-front lip, side skirts, and your choice of the two piece rear or one piece wrap around rear valance pieces as they used to only make the side skirts and rear valance.
It is very nice to see Maximas getting some much needed aftermarket support like more choices in body kits, carbon fiber hoods, wings, cat-back exhausts, coilovers, dash kits, turbo, intakes, altezzas, tail lenses, big brake kits, air-bag set-ups, y-pipes, and other mods in the future. The install was very straight forward. I did not have to sand, shave or re-modify any of the pieces they all bolted on perfect. A local paint and body shop painted my pieces for FREE! all I had to do was supply the paint.

For More Pics Go Here!
http://www.nissanx.net/gall/Pics-Mods
And for the small number of people who want to know what a STILLEN Front Lip and Rear Lip Pieces ONLY looks like here is a side pic.
http://www.nissanx.net/gall/alb/Pics...eaonlygood.jpg
MY HOW-TO INSTALL THE IONIC DYNAMICS BODY KIT
NOTE: To any of you who do not have a full body kit yet and you are planning on getting one please go ahead and get a full kit whatever style you choose. I made the “mistake” of just getting the front lip only and rolling around w/it for two years. Go ahead and get the full kit. If you don’t have enough money for the whole kit save up until you have the money. Don’t buy a lip hear or there and a bumper here or there. If you do buy individual pieces don’t put them on the car until you have them all. A car “needs” a full kit a front lip/bumper only looks ok for awhile. I understand now what it means to have a full body kit!
-Will
BTW!-Jose thank you very much! You da man!
I also added pics of my interior, my factory black armrest was worn out from me riding around w/my elbow on it from driving so my local upholstery shop stitched me a gray leather insert for $20.00 insert and my two-tone seat covers
First of all I would like to say I’m very, very pleased w/the quality and engineering of the IONIC DYNAMICS kit pieces, to be fiberglass they are of excellent quality, thickness, and overall fitment. I chose this kit because of the very economical price and the “sharp” angle of the kit really compliments my Mitsubishi Galant GTZ Trunk Spoiler. My Maxima is not lowered so I do not ever have to worry about scraping it on anything. The Stillen kit still looks really good but “everyone” has the Stillen kit. Greg from CustomMaxima.com called me about doing the Skyline body kit and dual exhaust for his upcoming ad but I kindly declined because I would have had to drive my car 16 hours from Georgia to Connecticut to get the and the kit is too aggressive for me. And with any aftermarket body kit front bumper replacement you can only use the top billet grill you cannot use the bottom billet grill. And I have both top and bottom billet grills and I really like the look of my front end w/the Stillen front lip. The Sarona is a nice kit too but w/so many quality control, and fitment problems I went away from it. Also I have read many bad posts/threads about the bad fitment and quality of the Skyline kit and the Sarona kit. I have not seen any bad posts about the Ionic Dynamics kit as far as quality of the fiberglass or fitment. I have seen many posts on how most people don’t like the design and how it looks. In my opinion out of all the kits the IONIC DYNAMICS kit is the right compliment to the Maxima besides the Stillen or Sarona kit if you are going for the “smooth” not-to-aggressive-look and at it’s economical price and “ease” of installation it is hard to beat. Also these skirts are wider and extend down the body of the car more than the Stillen kit which to me gives the Maxima more “wide-body” appeal. IONIC DYNAMICS now has a Full body Kit at a very reasonable price-front lip, side skirts, and your choice of the two piece rear or one piece wrap around rear valance pieces as they used to only make the side skirts and rear valance.
It is very nice to see Maximas getting some much needed aftermarket support like more choices in body kits, carbon fiber hoods, wings, cat-back exhausts, coilovers, dash kits, turbo, intakes, altezzas, tail lenses, big brake kits, air-bag set-ups, y-pipes, and other mods in the future. The install was very straight forward. I did not have to sand, shave or re-modify any of the pieces they all bolted on perfect. A local paint and body shop painted my pieces for FREE! all I had to do was supply the paint.

For More Pics Go Here!
http://www.nissanx.net/gall/Pics-Mods
And for the small number of people who want to know what a STILLEN Front Lip and Rear Lip Pieces ONLY looks like here is a side pic.
http://www.nissanx.net/gall/alb/Pics...eaonlygood.jpg
MY HOW-TO INSTALL THE IONIC DYNAMICS BODY KIT
NOTE: To any of you who do not have a full body kit yet and you are planning on getting one please go ahead and get a full kit whatever style you choose. I made the “mistake” of just getting the front lip only and rolling around w/it for two years. Go ahead and get the full kit. If you don’t have enough money for the whole kit save up until you have the money. Don’t buy a lip hear or there and a bumper here or there. If you do buy individual pieces don’t put them on the car until you have them all. A car “needs” a full kit a front lip/bumper only looks ok for awhile. I understand now what it means to have a full body kit!
-Will
BTW!-Jose thank you very much! You da man!
I also added pics of my interior, my factory black armrest was worn out from me riding around w/my elbow on it from driving so my local upholstery shop stitched me a gray leather insert for $20.00 insert and my two-tone seat covers
thats hot man
I too have a beige 97 gxe
I was thinking about doing something like that except i would replace the rear with stillen's
are you planning on lowering the car?
im hoping of going with maxspeeds, hopefully i wont scrape.
keep up the good work
I too have a beige 97 gxe
I was thinking about doing something like that except i would replace the rear with stillen's
are you planning on lowering the car?
im hoping of going with maxspeeds, hopefully i wont scrape.
keep up the good work
Originally posted by NiNe7-Gxe
thats hot man
I too have a beige 97 gxe
I was thinking about doing something like that except i would replace the rear with stillen's
are you planning on lowering the car?
im hoping of going with maxspeeds, hopefully i wont scrape.
keep up the good work
thats hot man
I too have a beige 97 gxe
I was thinking about doing something like that except i would replace the rear with stillen's
are you planning on lowering the car?
im hoping of going with maxspeeds, hopefully i wont scrape.
keep up the good work
thanks
my car was lowered I went back to stock ....
Originally posted by Craig Mack
Will,
Do your seat covers stitch in or do they have the cheapo elastic like the seat covers you find at discount auto parts? I might wanna order some. You got em from Henrik right?
Nice kit BTW.
Will,
Do your seat covers stitch in or do they have the cheapo elastic like the seat covers you find at discount auto parts? I might wanna order some. You got em from Henrik right?
Nice kit BTW.
they are just covers I got them from ebay..from this seller...here...
http://cgi6.ebay.com/ws/eBayISAPI.dl...&since=-1&rd=1
suprisingly they are of good quality...they have elastic....
Re: wow!
Originally posted by 1HOTMAX
will/ it looks sharp! nice choice on the mix and match. now to complete it with 19" chromes!
beige max rules
will/ it looks sharp! nice choice on the mix and match. now to complete it with 19" chromes!
beige max rules
Re: wow!
Originally posted by 1HOTMAX
beige max rules
beige max rules

Humm...I wonder how the Stillen sides and rear, look with a Ionic front lip.
Will you need to get some orange corners.

Car looks great!
that looks really good. your making me feel bad about just having a front lip
but anyway the kit matches with the stillen front lip especially good. and i`m not just saying that because you put me on your badest maxima on earth page
but anyway the kit matches with the stillen front lip especially good. and i`m not just saying that because you put me on your badest maxima on earth page
kit looks great!
my only question is about the seat covers...are they as wrinkly and not tight as they look in the pictures? i am looking to get some but i don't want one that's gonna be loose and kinda cheap looking.
my only question is about the seat covers...are they as wrinkly and not tight as they look in the pictures? i am looking to get some but i don't want one that's gonna be loose and kinda cheap looking.
wow, that combo looks pretty good....i prefer the back that wraps all the round though
but nothing owns more than stillen front with sarona back and sides...now THAT is hot
but that combo matches very well
but nothing owns more than stillen front with sarona back and sides...now THAT is hot

but that combo matches very well
William:
Thank you very much for the support and for the writeup! I am very happy to find that you are pleased with the quality and looks of the kit.
Keep up the good work representing all of us and making us proud!
Jose.
Thank you very much for the support and for the writeup! I am very happy to find that you are pleased with the quality and looks of the kit.
Keep up the good work representing all of us and making us proud!
Jose.
Originally posted by sil SE
dag man..youve been lip-only for the longest time.
way to go. are you on "baddest maximas on earth" page? if not, you should tell that dude to put you on. hahahaha
nice pics
dag man..youve been lip-only for the longest time.
way to go. are you on "baddest maximas on earth" page? if not, you should tell that dude to put you on. hahahaha
nice pics
the BADDEST MAXIMAS ON EARTH gallery is mine
.....so yes I'm in it....owner has to rep his car....
Originally posted by joaquink
Way to go Will. Your Max is classy and unique - very well done!
Keep representing so well at the meets/competitions.
Way to go Will. Your Max is classy and unique - very well done!
Keep representing so well at the meets/competitions.
I will try my best.....thank you for all of the positive feedback......
I added digital pics today more shots and both of my tv's on
front movie rear playstation...
http://www.nissanx.net/gall/Pics-Mods
front movie rear playstation...
http://www.nissanx.net/gall/Pics-Mods
Thread
Thread Starter
Forum
Replies
Last Post
Huttig2009
5th Generation Classifieds (2000-2003)
8
Sep 25, 2015 03:31 PM
kenc15
4th Generation Classifieds (1995-1999)
8
Sep 25, 2015 06:38 AM
MAXSE5SPD
Other For Sale/Wanted
2
Aug 23, 2015 12:06 PM
MikesChevelle
5th Generation Maxima (2000-2003)
4
Aug 6, 2015 11:36 AM
ViciousVQ30
4th Generation Classifieds (1995-1999)
0
Aug 5, 2015 05:40 PM




Car looks real nice...I was thinking about the same combo...with maybe the stillen rear...or the ionic single piece.
Will, the max is looking sweeeettt!!!!!

