Well I dropped off my car on Mon. morning to get my quaife,fidenza flywheel, and pr urethane mounts installed. I got it back the same afternoon. Here's my impressions of them.. Right off the bat I noticed that I could launch harder and there was basically no wheel hop when I got a little bit on the gas in 1st and 2nd. It's like having a fstb on the engine. There is engine vibration that you feel when the car in in neutral. But I'm sure I'll get used to it after a while. It's bareable to me but for some ppl it might not be. With the flywheel, revs climb faster now and drop a little faster. So I just have to shift faster.. But I like shifting slow because I like to hear the bov go psssshhtt... You blown guys know what I mean. My tires are kinda bald right now so I can't really test the quaife. But from just getting on the gas on the line I noticed that I get a lot less slippage and I can give it gas in turns and the car will just pull right through it.. These are recommended mods for everyone!!

Just wanted to share my experience

 

I would like a re-match
Jeff, is the man, real cool, very knowledgeable.

iforged, you know you want it, but when in doubt superleggeras are your best friend.

 

If you don't mind me asking, what did the install cost? I assume they did the flywheel and mounts for next to nothing because it's so easy after pulling the tranny. I'm wondering what a quaife install would cost.

 

 

now just get you rims fixed..

 

Cool!

R

 

Glad to hear my Quaife is doing well

 

Jeff is definately talented... I had the exact same job done a couple of weeks ago and he did it like it was nothing. The car runs great too. Still prepping it for a top secret project. Congrats man.

Deac

 

oooops I didnt know your quaife was sold! I have been advertising it for you. Never mind. I will be having this set up by mid summer. I just got a alloy flywheel. I just hate going thru the clutch break in period. So off comes the tranny for the 4th time geeez.

 

What one did you get? Where?

 

Yeap.. It did find a new home finally..

Thanks!

 

I saw your car there when I went to get my sts installed.. Nice ride man

Turbo is coming soon for you I see

 

Ironically I had 3 other people ask me specifically about the Quaife right after I sold it. And to think a few months ago I had problems finding a buyer....

 

Glad all went well. Very nice.

 

Yeah... all is well.. Now I know what you mean about the vibrations

 

fidenza flywheel from that from some nice guy that lives in Vegas the thing is sitting there but I think I may need a new clutch for the new flywheel.

 

I knew it! I was near Vegas ready to pic it up two Saturdays ago, but when I called him to meet up, he said he sold it to a "buddy", so I couldn't get it.

****er could have told me, but of course that would have been too easy. Instead he waited for me to call him up. Luckily, I didn't make the 1.5hr trip to pick it up before I called like planned.

WAPOS.

BTW, he "sold" it to me for $200, how much did you pay?

 

Nice guy to deal with I sat on it for two weeks to see if anyone else got it. I paid


$120 shipped

 

Dayyyymn...what a fool(him not you!). He could have eBay'd that bish for lots more.

$200 cash in hand or $120($100 after shipping plus hassle of going to post office)

Oh well, maybe next time I'll keep my mouth shut in the Mod forum.

 

In the mod forum haaa? I saw it in the FS section twice and no one replied, I contacted him about it and sat it on it. No one seem to want it so I took it off his hand. I mean you said that you were going to get it but he never told me anything.

 

You, ohboiya, and I did at least. He told me he was tired of getting "jerked" around and wanted $200 for it. So I said I'll be there Saturday(2/22). Apparently, before Saturday he changed his mind, but didn't bother to let me know. No biggie, I wasn't going to install it for about 2yrs., so at least you're getting use out of it.

http://forums.maxima.org/showthread....hlight=fidanza

 

Man I am fcking with you man he sold it for $320, He would not go any lower so I did the same thing everyone did sat on it

 

Why you little

It's all good bro!

 

Unless someone comes up to me and says heres some money Ill buy your clutch along with the flywheel Ill drop the tranny and give it to them and that leaves me with no choice but to get a new clutch and install the alloy flywheel. I have two guys getting a 5 speed so they are seriously thinking of doing it. Good thing is that the clutch grabs very very hard and no break in period. Just Mark everything when it comes off and reinstall it the same way.

 

Sorry to jump in here,

But does anyone know the OEM part that the quaife replaces?

I want to know this because I would like to know what parts I need to order from the dealer. I was looking into buying an OEM HLSD and transplanting it, but apparently FWD cars don't have a separate differential assembly. Thanks in advance.

 

I know you need the two rings, two bearings, and speed sensor wheel.. To be sure just call up DaveB @ Town North and he should be able to help ya.

 

I know I didnt waste my f ucking time doing that quaife write up clik on it everything you need to know is there, is below my sig

 

chill man!

 

I am just messing around