General Maxima Discussion This a general area for Maxima discussions for all years. For more specific questions, visit one of the generation-specific forums.

Cleaning AC/Heat vents

Thread Tools
 
Search this Thread
 
Old Dec 11, 2003 | 01:32 PM
  #1  
nupe500's Avatar
Thread Starter
Jedi Knight
iTrader: (13)
 
Joined: Mar 2001
Posts: 4,610
Cleaning AC/Heat vents

Ok...I started cleaning my vents today with some cotton swabs (Q-tips) and was wondering if there is a more effiecient way as it is very very tedious, and more so with my car as it sat for most of the summer not running.. any input is appreciated.

thanks,

nupe
Old Dec 11, 2003 | 01:37 PM
  #2  
deezo's Avatar
Supporting Maxima.org Member
iTrader: (3)
 
Joined: Apr 2001
Posts: 14,285
From: FV, NC
Yup, just pop them out. The center ones will be more work but you can do it.
Old Dec 11, 2003 | 01:44 PM
  #3  
nupe500's Avatar
Thread Starter
Jedi Knight
iTrader: (13)
 
Joined: Mar 2001
Posts: 4,610
pop them out as in remove the fins and such?
Old Dec 11, 2003 | 01:47 PM
  #4  
deezo's Avatar
Supporting Maxima.org Member
iTrader: (3)
 
Joined: Apr 2001
Posts: 14,285
From: FV, NC
Originally Posted by nupe500
pop them out as in remove the fins and such?
I wouldn't go that far. I would just spray them with some kind of cleaner and run them under hot water.
Old Dec 11, 2003 | 01:52 PM
  #5  
nupe500's Avatar
Thread Starter
Jedi Knight
iTrader: (13)
 
Joined: Mar 2001
Posts: 4,610
I see what you're saying but if I recall correctly the far left vent and the far right vent are screwed in from behind the dash...so what to do now? (assuming my assertion is correct)
Old Dec 11, 2003 | 02:00 PM
  #6  
deezo's Avatar
Supporting Maxima.org Member
iTrader: (3)
 
Joined: Apr 2001
Posts: 14,285
From: FV, NC
Originally Posted by nupe500
I see what you're saying but if I recall correctly the far left vent and the far right vent are screwed in from behind the dash...so what to do now? (assuming my assertion is correct)
Hmmmm....I don't remember them being screwed in. Its beena while since I've messed around with them but the last time I did. I thought I popped them out with a flat head screw driver. Someone will need to confirm this.
Old Dec 11, 2003 | 02:01 PM
  #7  
deezo's Avatar
Supporting Maxima.org Member
iTrader: (3)
 
Joined: Apr 2001
Posts: 14,285
From: FV, NC
Originally Posted by nupe500
I see what you're saying but if I recall correctly the far left vent and the far right vent are screwed in from behind the dash...so what to do now? (assuming my assertion is correct)
Hmmmm....I don't remember them being screwed in. Its beena while since I've messed around with them but the last time I did. I thought I popped them out with a flat head screw driver. I think there is a little sprinf that keeps them in place when they are in the dash.

Someone will need to confirm this.
Old Dec 12, 2003 | 06:10 AM
  #8  
twiggy144's Avatar
Senior Member
 
Joined: Aug 2003
Posts: 741
From: Montreal
the center vents on a '98 are not screwed. One can pry them out with a small flat blade screwdriver wrapped in a piece of cloth for protection. Dont know about the side vents though.
I assume all 4th gen are the same.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Miket2006
6th Generation Maxima (2004-2008)
4
Mar 1, 2021 03:55 AM
BobTX10
8th Generation Maxima (2016-)
14
Oct 7, 2015 08:43 AM
fx4five
1st & 2nd Generation Maxima (1981-1984 and 1985-1988)
0
Oct 1, 2015 04:58 AM
Max Nu-BE
5th Generation Maxima (2000-2003)
2
Sep 28, 2015 10:25 AM




All times are GMT -7. The time now is 07:27 AM.