Twin Turbo idea...
03-26-2004, 09:48 AM
#1
Donating Maxima.org Member
Thread Starter
Join Date: Feb 2004
Posts: 330
Twin Turbo idea...
Would a twin turbo setup for the 300ZX fit onto a 3.0 Maxima since the Maxima engine is basically a N/A 300ZX engine?
03-26-2004, 10:09 AM
#4
That's nothing. I put the Z engine in WITH the twin turbos. Then I hooked the twin turbos to a big single!
Originally Posted by K Pazzo 6
me too....I'm working on fitting a 3rd turbo now....cars too slow w/ only 2
03-26-2004, 10:13 AM
#6
Originally Posted by Jeff92se
That's nothing. I put the Z engine in WITH the twin turbos. Then I hooked the twin turbos to a big single!
Well thats nothing. I have a twin turbo setup and a super charger for the lag, and I have them all connected to a very big turbo.
03-26-2004, 10:16 AM
#8
Well I have a 100 shot of nos feeding each turbo!
Originally Posted by optimus310
Well thats nothing. I have a twin turbo setup and a super charger for the lag, and I have them all connected to a very big turbo.
03-26-2004, 10:18 AM
#9
Originally Posted by SE01
Would a twin turbo setup for the 300ZX fit onto a 3.0 Maxima since the Maxima engine is basically a N/A 300ZX engine?
03-26-2004, 11:23 AM
#12
Originally Posted by Jeff92se
Well I have a 100 shot of nos feeding each turbo!
Nos is teh weak souce... I use a direct shot of kryptonite on my ride. (for those of you who watch smallville)
03-26-2004, 12:16 PM
#15
Originally Posted by Xplayboy69x
is the 300zx a fwd or rwd, if it is fwd it might be very possible to just drop a 300zx in there with the twin turbo
it will be an whole lot of work though
it will be an whole lot of work though
lock this thread before more people read it and lose brain cells...and BTW I've ridden in one of Jeff's TT Maximas before it runs 18's
03-26-2004, 12:34 PM
#16
Have you seen how cramped the 300zx engine bay is?
It would be a unique project though, its possible if you are good enough with wiring, and you can get some new mounts made. Then you would need the engine, tranny, custom driveshaft, rear end, and wiring harness from the 300zx.
BTW: I think you may be thinking about the J30, it has the same engine as a N/A 300zx.
It would be a unique project though, its possible if you are good enough with wiring, and you can get some new mounts made. Then you would need the engine, tranny, custom driveshaft, rear end, and wiring harness from the 300zx.
BTW: I think you may be thinking about the J30, it has the same engine as a N/A 300zx.
03-26-2004, 12:41 PM
#17
u guys have som weak cars. i have a supercharger wit 13psi and four twin turbo setups for each tire and i have a 200 shot for each of the twin turbo setups. then since im making that much power i got the hiscas four wheel steering system to help my car handle better. then i thought i need to go full awd and i got the awd from a hyundia santa fe which allows me to put all my hp to the ground.
told you that u guys have some weak cars.
told you that u guys have some weak cars.
03-26-2004, 12:44 PM
#18
Donating Maxima.org Member
Thread Starter
Join Date: Feb 2004
Posts: 330
Originally Posted by Big D
Judging from this post I bet you still haven't realized those guys are being sarcastic. Just seems like you might be one of them slow people with drool coming from their mouth all the time. The maxima engine is NOTHING like the 300zx engine and whoever told you that should get hit by a falling airplane. From this post I'm also guessing you haven't read the FAQs either so get your *** over there ASAP. One more time, a n/a 300zx engine(vg30de) is NOT the same as a maxima engine(vq30de). Stay in school.
03-26-2004, 12:48 PM
#19
they can be mean sometimes... i was just joking and im sure that every1 at some time thought that you could twin turbo a maxima with the parts from a 300zx. and im not saying u cant twin turbo a max u just cant do it using 300zx parts
Thread
Thread Starter
Forum
Replies
Last Post
litch
4th Generation Maxima (1995-1999)
123
01-04-2024 07:01 PM
Keyno McMike
3rd Generation Maxima (1989-1994)
1
09-21-2015 07:18 AM