Here's a link with details on Phil96SE's Maxima....
02-21-2002, 08:37 PM
#46
Donating Maxima.org Member
Join Date: Jan 2002
Posts: 818
Originally posted by SprintMax
1) its dark outside
2) its cold outside
3) jack is a 80 lb floor jack and will have to carry jackstands
4) i am still on 18's.. if i remove 1 i have to remove all 4
5) if i put on the full size replacement.. i have to change the other 3
1) its dark outside
2) its cold outside
3) jack is a 80 lb floor jack and will have to carry jackstands
4) i am still on 18's.. if i remove 1 i have to remove all 4
5) if i put on the full size replacement.. i have to change the other 3
02-22-2002, 03:11 AM
#49
look at the date.. i really can't tell you now why.. i am sure i had a good reason back then 
Originally posted by Badaxxima
Okay Sprint, I'm a little confused... If it's your rear tire that is flat, then why would you have to change all the others? Yes it would look stupid having a stock wheel and 3 tight ones, but at least you could take the flat and get it fixed or replaced. I didn't think the rear wheels were connected to anything else, hence, changing one won't mess with gear ratios or speedo reading or braking, etc.
Okay Sprint, I'm a little confused... If it's your rear tire that is flat, then why would you have to change all the others? Yes it would look stupid having a stock wheel and 3 tight ones, but at least you could take the flat and get it fixed or replaced. I didn't think the rear wheels were connected to anything else, hence, changing one won't mess with gear ratios or speedo reading or braking, etc.
02-22-2002, 08:32 AM
#50
Originally posted by Badaxxima
Nice ride man. How much boost are you running and what kind of power are you puttin' out with it?
Nice ride man. How much boost are you running and what kind of power are you puttin' out with it?
no no nothere is no tellin of the boost psi...
and ther is no telling of the hp at the wheels...
(if you pay me, i will tell though)
02-22-2002, 03:41 PM
#51
Originally posted by redmaxpa007
no no no
there is no tellin of the boost psi...
and ther is no telling of the hp at the wheels...
(if you pay me, i will tell though)
no no nothere is no tellin of the boost psi...
and ther is no telling of the hp at the wheels...
(if you pay me, i will tell though)
02-22-2002, 04:52 PM
#53
Re: I'll give the info for free....
10.89
Originally posted by My 4DSC
Phil boosts 22psi and puts down 394hp and 368 lb-ft with a custom 1.2" pulley. He also runs a 10.8 @ 129 mph on slicks.
I seent it wit my own eyes!
Phil boosts 22psi and puts down 394hp and 368 lb-ft with a custom 1.2" pulley. He also runs a 10.8 @ 129 mph on slicks.
I seent it wit my own eyes!
02-22-2002, 05:07 PM
#55
Originally posted by NotNew!!NewSN!!
yes yes, i remember the rides in phils car.... "phil? your speedo says 130, i coulda sworn we were just goin 40mph...."
"yes sam, someday you will understand...."
your boost shall be the end of me phil....
yes yes, i remember the rides in phils car.... "phil? your speedo says 130, i coulda sworn we were just goin 40mph...."
"yes sam, someday you will understand...."
your boost shall be the end of me phil....
doesn't start.. we won't have to worry about locked threads 
08-27-2002, 05:52 AM
#67
Originally posted by AntGVR4
Who is this phil character you speak of?
I don't know of any phil's that drive a maxima.
Ant
Who is this phil character you speak of?
I don't know of any phil's that drive a maxima.
Ant
08-27-2002, 06:25 AM
#68
*cough.. s/c maximas and the rear ends of dump trucks do not get along..* cough *cough
Thread
Thread Starter
Forum
Replies
Last Post
Kyle Lee Cleveland
6th Generation Maxima (2004-2008)
1
09-28-2015 09:01 PM
rbaker100
8th Generation Maxima (2016-)
4
09-25-2015 07:52 PM
maxfever1987
Maximas for Sale / Wanted
0
09-06-2015 06:20 PM