Us 1st genners could use some attention too but as Wiz said, not too many would be willing to commit, especially for us. Not too many of us on here....

But a hood and trunk would be interesting....

 

carbon fiber pieces for the interior of an 00-01 i30 would look awesome.

 

For a one off hood? No. For a group buy? Possibly.

 

Another satisfied customer below & his 4th gen Trans Am. He will be posting more photos once the rest of the items are done as he sent in even more parts after he got the first batch back!

LS1TECH - View Single Post - Carbon Fiber on 4th gens

 

Would really be interested in cf interior parts

 

Here is the front panel that he just did on his wife's new Audi A5.

 

dont waste your time looking for interior stuff. its everywhere on ebay and has been around a very long time... i believe a few of our carbon fiber addicts will attest to it...

http://www.ebay.com/itm/4347cf-Made-...ht_11342wt_905

 

Hmmm...

I have been shopping around for a duckbill cf trunk for a 98 maxima. I know I cant get a group buy going because a lot of people don't even buy the regular cf trunk. How much?

 

patience grasshopper, patience...

 

any idea if you could wrap a case for a phone in CF? I have a Samsung Galaxy Note

 

Id be interested in a cf grille if it would be direct fit no modification needed,as well as cf trim pieces... mostly the radio trim and shifter trim for a 5 speed 4th gen... mainly a grill and shifter trim....cmod made a grill but i refuse to.pay 150-170 for a basic grill with screen mesh that still needs modification to fit..if he could get a design and make it work with cf and screened of some sort without the nissan emblem im sure thered be a few of us here willing to purchase...you just gotta find the right crowd....you know,those that arent scared to spend money ...LOL...

 

is this the actual cf trim piece which bolt in or a crap overlay kit....it may be real cf but if its only an overlay its a waste of time....juss sayin real cf that bolts in would look FAR better..and id be interested in some pieces myself...cf...lakeshore blue....best combo....ask Wiz he knows LOL

 

Cost of development + cost for the part. Development on a large item like that is typically around $1k.

 

You're looking for molds of interior pieces?

 

I'd love to earn your business, but I can tell you that it will be more than $170.

 

If you can send it in, I don't see why not.

 

I could definitely send an extra backplate in. Any idea on the cost? The piece isnt that big...~"5.5"x4"

 

Got a pic of it?

 

pretty sure this is the samsung galaxy note

 

C/F: Front & rear bumper with side skirts for a 02 max se?

 

Items like that require at least 5 committed buyers unless you wanted to front the development cost.

 

They are overlays... If you wanted to do CF to replace your current it would require a wrap and slight trimming to make it fit. You couldnt replace the piece because of the mounting tabs n such. Best best is trim away and wrap the current plastic so it keeps its standard mounts and form. I mean, I guess with the write amount of money anything is possible, that just seems like the more logical approach! I believe wiz has a kit similar to that though...

 

He does wraps & new molds.

 

Lol i know a cf grill would cost more...i simply stated i dont wnt to pay 170 for a fiberglass grill that dont even fit without modification....how much ballpark you think a carbon fiber 97-99 grill would cost,and would it be guaranteed fitment without having to drill extra holes?? Me personally i prefer no emblem on it with a nice design... im not scared to spend money...just dont want to spend it on something thats going to cost me alot and then have to modify it to fit properly...

 

driling two holes is hardly enough of a modification to justify getting upset over. as long as it fits correctly with whatever installation procedure, who cares.

 

Fitment would be guaranteed. What kind of grill are you looking for. Stock in carbon, a particular aftermarket grill in carbon or a custom grill?

 

Below are the Front splitters & rear bumper insert for a CTS-V we just did:

 

well,something along the lines of a cmod grill in carbon fiber or even a basic stock design with mesh center no emblem... i bet you if you design one and post a pic of it The Wizard may be interested...hes a carbon fiber junkie lol but as far as stock design with mesh grill....ballpark figure would be good... id be more interested in a carbon fiber shifter bezel for 5 speed.... its all on pricing...i know cf isnt cheap thats for sure lol

 

Let me know what grill you have to send in. If you wanted a mold, I'll need at least 5 committed buyers.

 

Ok scratch the grill.. shifter bezel would be more like it for a 5 speed of course.. and i got no.problem sending it in but in order to get 5 commited buyers id need either a definate price ir ballpark figure,most people wont commit to buying something unless they know price range...

 

Of course people would know a price before I have anyone commit or give a deposit.

With that said, the shifter bezel does not require 5 buyers. The interior trim is wrapped & that can be done as a one off.

 

Well. i dont doubt youre quality however for the price you gave me, NO ONE would pay that for a wrap...now if it was made from a mold and fit like oem thatd be different

 

Ok, now I'm curious as to just how much was quoted. I've had items wrapped before and I'm wondering how the prices compare.

 

No prices in the thread please.

Interior parts are rarely done as a new mold due to the clips & locking systems they have from the factory for install.

With that said, I'm happy to work with anyone's budget, but I will need to know what it is.

 

Why the big secret? I can only think of one reason why......

 

There's no secret.

 

^Why cant you post it then

 

Ok well im no professional by no means HOWEVER i have a general idea of what parts should cost...i mean ID sells cf lipkits hoods trunks wings...but im not gonna bash this guy as he is a legit businessman,i just dont like his prices

 

I met you in the middle. If you can find quality carbon for the price you needed to be at please send them to me as well. I'll outsource everything to them.

 

Then post it!!