Harlan engineering? Window switch needed!
#1
Harlan engineering? Window switch needed!
I've been told this is the window switch I need but I can't order off his site, no number to call, and no replies to my emails. Has anyone ordered from him recently? Help!
#2
If you can't get your hands on a Harlan, you can always go with the Summit rpm/window switch.
http://www.summitracing.com/parts/su...FZSIfgodmWEAdw
For the more costly options, you can use a VAFCII or Greddy Emanage Ultimate as well.
http://www.summitracing.com/parts/su...FZSIfgodmWEAdw
For the more costly options, you can use a VAFCII or Greddy Emanage Ultimate as well.
#4
This is the last thing besides plugs that I need to start running a small 55 shot. Thank you.
Heres the Jegs switch: http://www.jegs.com/i/JEGS+Performance+Products/555/40824/10002/-1
#5
Bingo! I would've posted in the nitrous forum but its almost dead. I have no problem using the summit or jegs one if it will work. It says I would need a tach adapter but I don't think I will. We have a tach wire what else would it need?
This is the last thing besides plugs that I need to start running a small 55 shot. Thank you.
Heres the Jegs switch: http://www.jegs.com/i/JEGS+Performan...40824/10002/-1
This is the last thing besides plugs that I need to start running a small 55 shot. Thank you.
Heres the Jegs switch: http://www.jegs.com/i/JEGS+Performan...40824/10002/-1
#7
Funny story actually Harlan emailed me back today... He's still making them. I checked my email right before making this thread lol. Anyways seeing as Harlan and jegs one is the same price any recommendations before I purchase one?
#8
Hard to say. I'm a fan of Harlan products as I use the rpm switch religiously for my MEVI's. Others will say differently and have had great success with Summit products. Maybe go with Harlan since that was your first intuition?
If you want the digital readout, then maybe Summit/Jegs is the way to go.
If you want the digital readout, then maybe Summit/Jegs is the way to go.
#10
Hey guys, Good to hear. I went with the harlan and should receive it next week. Now just to figure out where to mount all these switches. Thinking about getting a blank din plate and mounting it all there.
Thread
Thread Starter
Forum
Replies
Last Post
vingodine
5th Generation Classifieds (2000-2003)
45
05-21-2016 12:46 PM
TonyJr
3rd Generation Maxima (1989-1994)
4
08-20-2015 12:14 AM
kjm900r
4th Generation Maxima (1995-1999)
6
08-05-2015 07:14 AM