River City Raceway Drag Meet with Maximas and Z's!
#1
Guest
Posts: n/a
River City Raceway Drag Meet with Maximas and Z's!
http://www.5thgenmaximas.com/russmax...20maxz%20meet/
Adam took 2nd place in the bracket racing!
Congrats on a best time of 14.2 at 101 mph! Work on those 60 fts Adam and you will do 13s with the stock pulley!
You will need QuickTime video player to see the videos. I had to use a lower rez to get more videos on the camera to fit.
Adam took 2nd place in the bracket racing!
Congrats on a best time of 14.2 at 101 mph! Work on those 60 fts Adam and you will do 13s with the stock pulley!
You will need QuickTime video player to see the videos. I had to use a lower rez to get more videos on the camera to fit.
#3
Originally posted by Synki
What was his 60ft times?
What did everyone else run?
With a trap speed of 100+ mph, he should be at least a 13.9.
What was his 60ft times?
What did everyone else run?
With a trap speed of 100+ mph, he should be at least a 13.9.
Thanks Synki
Yeah I hope to be hitting high 13's if I can get a good 60ft. at 2.3 and 2.4 with drags its not helping I was able to hit 101mph a few times so I think I have a good chance I just need to work on the launch, and control wheel spin.
#5
I think we should see good things from org members this year. Everyones getting faster. Now only if everyone can solve their traction problem, Maximas will be really turning heads.
Cool beans Climax!!!!!!!
Cool beans Climax!!!!!!!
#7
Originally posted by deezo
I think we should see good things from org members this year. Everyones getting faster. Now only if everyone can solve their traction problem, Maximas will be really turning heads.
Cool beans Climax!!!!!!!
I think we should see good things from org members this year. Everyones getting faster. Now only if everyone can solve their traction problem, Maximas will be really turning heads.
Cool beans Climax!!!!!!!
#9
Guest
Posts: n/a
Originally posted by MardiGrasMax
2.3 - 2.4 60's on DR's
I thought you were on a smaller pulley?
Was this with 8:1 or 6:1 FMU disc?
2.3 - 2.4 60's on DR's
I thought you were on a smaller pulley?
Was this with 8:1 or 6:1 FMU disc?
He didn't smoke them in the water, we kept telling him too he just spun them up to the line.
#10
Originally posted by RussMaxManiac
He went back to the 6:1 now...and on the stock pully that came with the SC. 5.5 psi I believe.
He didn't smoke them in the water, we kept telling him too he just spun them up to the line.
He went back to the 6:1 now...and on the stock pully that came with the SC. 5.5 psi I believe.
He didn't smoke them in the water, we kept telling him too he just spun them up to the line.
#13
Originally posted by The New CLIMAX
Yeah Russ is correct I am running the 6:1 FMU, with stock 3.60 pulley. I could not get them smoking, but I am learning more and more. I think I need more practice. I was surprised to get 101.6 mph.
Yeah Russ is correct I am running the 6:1 FMU, with stock 3.60 pulley. I could not get them smoking, but I am learning more and more. I think I need more practice. I was surprised to get 101.6 mph.
I think a 3.125 pulley would do ya right
#15
Originally posted by MardiGrasMax
What type and size of DR's are you running?
I think a 3.125 pulley would do ya right
What type and size of DR's are you running?
I think a 3.125 pulley would do ya right
Do you think the BF's are better than the nitto's?
#16
Originally posted by The New CLIMAX
Running on BF Goodrich 225/50/15 on 3rd gen rims they weigh 50lbs each so they are heavy.
Do you think the BF's are better than the nitto's?
Running on BF Goodrich 225/50/15 on 3rd gen rims they weigh 50lbs each so they are heavy.
Do you think the BF's are better than the nitto's?
Which BFG's Comp T/As or gForce?
The Comp T/A is an older design than the 555r's and gForce. The gForces are replacing the Comp T/A's. So if a newer design is better, the gForce DR's are better...
I went for 205/50-15 gForce DR's, they are smallish but the lower gear ratio will help allot! I am putting them on Kosei K1, they should be well under 40#
#17
Originally posted by MardiGrasMax
Whoa 50lbs, that hurts!
Which BFG's Comp T/As or gForce?
The Comp T/A is an older design than the 555r's and gForce. The gForces are replacing the Comp T/A's. So if a newer design is better, the gForce DR's are better...
I went for 205/50-15 gForce DR's, they are smallish but the lower gear ratio will help allot! I am putting them on Kosei K1, they should be well under 40#
Whoa 50lbs, that hurts!
Which BFG's Comp T/As or gForce?
The Comp T/A is an older design than the 555r's and gForce. The gForces are replacing the Comp T/A's. So if a newer design is better, the gForce DR's are better...
I went for 205/50-15 gForce DR's, they are smallish but the lower gear ratio will help allot! I am putting them on Kosei K1, they should be well under 40#
What is a good size rim to get for drag radials in width as well?
#18
Originally posted by The New CLIMAX
Yeah I may get some nitto's once I wear these out, and some lighter rims these rims are killing me in weight.
What is a good size rim to get for drag radials in width as well?
Yeah I may get some nitto's once I wear these out, and some lighter rims these rims are killing me in weight.
What is a good size rim to get for drag radials in width as well?
Thread
Thread Starter
Forum
Replies
Last Post
Greenmaxspeed
4th Generation Classifieds (1995-1999)
6
08-31-2015 09:06 PM