GD:Zinc Plated Brembo Blanks 89-01

Subscribe
May 5, 2003 | 08:57 PM
  #1  
Here is the deal:
I talk to my supplier to arrange a GD for 89-01 maxima.If we have 10 FIRM buyers the deal is a go.
For people who are not familiar with rotors, these are direct OEM replacement, without any modifcation to fit on. And the rotor im offering is zinc plated to prevent rust.

Brembo zinc plated to military spec, for year 89-01 maximas.

price for 10 people will be $39 each $78 per pair + shipping. Thats $156 for the Set +shipping. Depends on your location shipping, rate should between $10-$36

If you are in S.cali you can pick them up from me and avoid shipping.

Questions:

If you have any questions please feel free to e-mail me and asked.

Please post the year of your car, follow by your e-mail addrese and zip code. Post only if you are FIRM of purcahse


lets get this started

jason


*I will e-mail you with order information once we reach 10 people*

GD members
1 Kanaka Front pair for 97 96744
2 MaximalMax Full set for 97
3 boo 1997 Full set 77433
4 MaximaGold Full set 06401
Reply
May 5, 2003 | 09:38 PM
  #2  
Re: GD:Zinc Plated Brembo Blanks 89-01
How is this deal different from the other thread ?


~limsandy
Reply
May 5, 2003 | 09:42 PM
  #3  
Re: Re: GD:Zinc Plated Brembo Blanks 89-01
Quote:
Originally posted by limsandy
How is this deal different from the other thread ?


~limsandy

the other one doesn't offer Brembo blank this one is Brembo Blank ONLY, no cross drill/slotted dimple.etc

Read the trend
Reply
May 6, 2003 | 04:27 PM
  #4  
I just drop my price from $86 per pair to $78 per pair to beat the Groubbuycenter price.

Price brake down
$39 each Fron or Rear
$78 pair Front or Rear
$156 for the set.


This is a awsome price! and my rotoros are zinc plated(prevent rust), unlike others.

10 FIRM buyer is needed
Reply
May 7, 2003 | 12:30 AM
  #5  
Put me down for a front pair.
Can I get a quote to zip 96744 (Hawaii)?
Reply
May 7, 2003 | 10:18 AM
  #6  
I'll take a full set for a 97 Max. I need to know whether the group deal is a go soon though. What about pads? Billzeck@core.com
Reply
May 7, 2003 | 07:16 PM
  #7  
Quote:
Originally posted by AuToMaX_95
This is a awsome price! and my rotoros are zinc plated(prevent rust), unlike others.

My rotors are all rusty but it's not warping and it even works better with the rust.

~limsandy
Reply
May 7, 2003 | 08:54 PM
  #8  
Are you going to have another GD w/ the cross-drilled rotors??? Maybe I should wait for those???
Reply
May 7, 2003 | 10:16 PM
  #9  
Quote:
Originally posted by marky3320
Are you going to have another GD w/ the cross-drilled rotors??? Maybe I should wait for those???
Yes im going to have another GD for cross drill on next monday.

Kanaka i'll get back to you on the shipping

MaximalMax don't worrie about the deal, im sure we can get enough buyers soon.Pads will be offer on the next Monday GD.
Reply
May 7, 2003 | 10:21 PM
  #10  
do u have pixes for the drilled / slot rotor ?
Reply
May 7, 2003 | 10:22 PM
  #11  
Quote:
Originally posted by GReDdyXMaXiMa
do u have pixes for the drilled / slot rotor ?
click on my homepage, last page

Reply
May 7, 2003 | 10:25 PM
  #12  
4/set = $158.00 plus shipping ?
Reply
May 7, 2003 | 10:36 PM
  #13  
Quote:
Originally posted by GReDdyXMaXiMa
4/set = $158.00 plus shipping ?

Yes, for blanks only $156 per set
Reply
May 10, 2003 | 06:13 PM
  #14  
I'm in for front and rear sets!!!!!!

1997
brandons@iwon.com
77433


boo
Reply
May 10, 2003 | 06:47 PM
  #15  
I'm in for a set front and rears. 1997 Max to zip 06401
benettonf1@adelphia.net
Reply
May 10, 2003 | 11:03 PM
  #16  
sorry guys i have been busy lately so didn't have time to check on the shipping rate. BUt i promise i'll get back to you guys on monday for sure.

MaximalMax i need your zip code please let me know
thanks

jason
Reply
May 12, 2003 | 11:49 AM
  #17  
i just e-mail all you guys with the shipping cost

please e-mail me for order information

thanks
Reply
May 21, 2003 | 07:29 AM
  #18  
how would these rotors paired with stock pads work out?.. will the pads last or work like stock rotors?.. thanks.. i'm gauging interest in this GD.
Reply
May 21, 2003 | 07:57 AM
  #19  
Quote:
Originally posted by BOZOnPJs
how would these rotors paired with stock pads work out?.. will the pads last or work like stock rotors?.. thanks.. i'm gauging interest in this GD.
The Brembo blank bascilly is a stock replacement. The pads should wear out the same as you were putting on OEM rotors.
The best part about the brembo im selling is they are Zinc plated to prevente rust.

let me know if you have any more questions.
jason
Reply
May 21, 2003 | 11:37 AM
  #20  
How much performance gain can I expect to get? How hard is the install? What can I expect once i put them on?
Reply
May 21, 2003 | 11:44 AM
  #21  
Quote:
Originally posted by TylerBorg
How much performance gain can I expect to get? How hard is the install? What can I expect once i put them on?
There is not much peformance gain from Blank rotors. Because is the same thing as a OEM. Instead of paying $50 for each you can get it from me for $39 zinc plated. which prevent rust. I am sure my price is the cheapest.

The installation is very easy. Total botls yo unscrew is 4 for each caliper. I belive is 2 14mm for the caliper and 2 19mm for the Caliper braceket. And for the rear is 2 14mm and 2 17mm for the bracket. Very simple. just make sure you screw it tight after installation is complete.

if you have any more questions please let me know
thanks
jason
Reply
May 22, 2003 | 02:13 PM
  #22  
can i still get in on this deal? i would need the rotors by like mid-end of next week. will this happen, or shoudl i just order from tirerack or something?
Reply
May 22, 2003 | 11:01 PM
  #23  
Quote:
Originally posted by djshawnee
can i still get in on this deal? i would need the rotors by like mid-end of next week. will this happen, or shoudl i just order from tirerack or something?
Sorry forgot to updat the post.
All rotors are no certain amount of people needed.
e-mail me for any questions
thanks
jason
Reply
Jun 3, 2003 | 11:14 PM
  #24  
I'm in
Jason,
I'm in for a complete set. What's the update on the group deal and shipping to upper NJ? email me with ordering info.

Quote:
Originally posted by AuToMaX_95


Sorry forgot to updat the post.
All rotors are no certain amount of people needed.
e-mail me for any questions
thanks
jason
Reply
Jun 4, 2003 | 02:34 PM
  #25  
Re: I'm in
Quote:
Originally posted by cyclecrazy55
Jason,
I'm in for a complete set. What's the update on the group deal and shipping to upper NJ? email me with ordering info.

Deal still going deadend is June 15 I need your Zip code to give you a shipping cost

thanks
jason
Reply
Jun 6, 2003 | 08:28 PM
  #26  
will you get in rotors for the 2001 with these prices?
Reply
Jun 6, 2003 | 08:43 PM
  #27  
Yes but the 2k-2k1 rotor still on back order.
Reply
Subscribe