It reaplce everything besides Brake Fluid

 

I won't be able to get into this group deal unless its extended over to next month, but will there be another run at this GD in the future? Thanks for the help.

 

2001 Maxima SE

Hey, could you price just read of Cross drilled/slotted rotors & pads for front and back.

If you can price a shipment to Canada VS a shipment to 14261

Email back to afj3@cornell.edu

Thanks AJ

 

automax,

need the front blank discs ($39 each), front pads ($35 each) for a 1997 Nissan Maxima SE.

jang_paul@hotmail.com

ready to order. please let me know how much i owe total including paypal fee shipped to 10023.

 

I'll let back to you guys with the shipping quto tomorrow
thanks
jason

 

rear brake pads for a 98 maxima SE shipped to 01129

thanks

tino

 

Everyone got mail!


Deal ends in 5 days.

 

.... and calipers...

 

Caliper is for Brake Upgrade not for necessary of Brake Replacement.

 

Hey, thanks, AutoMaX_95..... just received my order today. Looks great!

 

Thanks!

 

Any news on 5th gen (2k1) availability?! I need brakes! Thanks!

 

Sorry nothing yet. =(

Most likely after the GD is close i'll do another GD just for the 5gen

 

Did you get my payment? I sent you an email asking to confirm but didn't get a reply. I just wanted to make sure you got the money via paypal.

 

ray

I got your payments already. I saw the mail. I thought you only want to e-mail me back to Confrim. I didn't know you want me to e-mail You.
Anways i got your payments.
Your order should go out today or tomorrow.
thanks
jason

 

is the GD still going on for the rotors?

 

GD is still going for everything Pads, Rotors and SS lines.
After June 15th all prices will go back up

 

man i wont have all the money by then im going to miss the deadline!!!!!!

Jason i havent had a chance to tinker with the HID's ill do it tonight.

Jon

 

Hey,

I need a price quote on brembo blanks, front and rear pads, and SS lines for a 2001 SE to zip 11003. Thanks

Andy

p.s. sorry about last time, I was short on cash and too busy to even check email. Thank you

 

John don't worrie i got one set for you on reserve. Since you are one of the local guy =)
call me or post here about the HID
thanks
jason


Andrew.. We are still out of Front rotors right now for 2k-2k1. you want me to give you a quto on jus the rear rotors and the rest stuff you need?

 

Need a set of 2k Front brembo blanks.....Are they in stock?

 

Need front and rear pads for a 99, shipped to 12601, paying with Paypal.
GMT

 

the front 5th gen rotors aren't in...will i still be able to get them at the same price if they come in after the 15th?

 

Is this still available? I have a 2000 maxima SE. What are blanks? What is shipping cost to Georgia? Is there a break on shipping if I order rotors,pads and ss lines all at once? Do you have cost on calipers? Can you supply the fluid. What fluid do you recommend? You can e-mail me if you like HKRULE3@Hotmail.com I do have a paypal account and can pay that way if you prefer. Thank you

-MadMaximus

 

front pads for 98.
zip 10522.
geo1317@aol.com.
I have paypal ready to pay right now.

 

Everyone got mail
thanks
jason

 

Newbie question..

What's the difference in the different types of rotors. (dimpled, x-drilled, etc) Is it just looks? Or does one perform better/quieter than another?

Thanks

 

Are we still going to get the deal on the front rotors if we want them now? What if we pay now and wait for them to come in? Let me know on the rear rotors/pads and ss lines to 11003 for the 2001 SE. thanks

Andy

 

OVer all there is much discussion about different type of rotors. But if you want faster brake go for the cross drill/slotted.


Andrew
you don't have to pay me in advance. All price will be the same when i introduce the 5gen GD. I will give out the best price!

 

Cool,

I didn't get a PM with the price quote and what I have to do to order this stuff. 2001SE with rear rotors/pads/ss lines to zip code 11003. Thanks!

andy

 

Almost waited too long...

I need the following:

X-Drilled/Slotted pair for front
(2) Brembo blanks for rear
A full set of Axxis Metal Master pads
A full set of the Technafit SS lines

for a 2000 SE

I know you are out of the fronts for the 2ks but I am assuming that ordering them now insures I pay the same when they do come in.

Ship Zip: 47711
email: maxxximus@insightbb.com

 

You don't have to pay me in advance. When the new GD come out for the 5gen price will be the same.

 

Keep me in the loop also...I plan to puchase a set of 4 slotted ONLY rotors for 2k1 model...

 

Sent out MO today. Thanks Tori

 

Waited till last minute. I'm in if you still have them. Check your PM.

 

Mailbox is Full!

CrossDrilled/Slotted Front and Rear
Full Set of Axxis Pads

1998 Maxima SE

Shipped to:
Powder Springs, GA 30127

E-mail me at: gte626z@mail.gatech.edu with all info for payment ect.

So you say they will make no extra noise...I've often heard that people say they will be noiser. Why do you say they will be fine as long as I change the fluid? These are the silver looking ones not the goldish ones right. Just wanted to double check.

Let me know how much +shipping +paypal fee. Will you provide a tracking number?

I can paypal the money as soon as I know exactly how much and if you still have them!

Thanks,

Rahn

 

Every time you do a brake job, is better if you change your fluid. Yes these are the silver one, not the gold one. I can't said there will be no noise. from a scale 0-10 i would said the noise level is between 0-2.

I will get back to you on shipping by monday. Yes i knwo the GD is close on June15th. But who ever gets to me before tomorrow I will honor the GD price still.

Tracking # is included. I will get back to you before monday




*Guys Who ever gets to me by June15 i will still honor the GD price. Who ever e-mail me after June 15 price will not be the GD price.

thank
jason

 

GD are now close, all price will be up by $5
Front pads $40
Rear pads $40
Front rotors $100
Rear rotors $100
SS lines $90

thanks
jason

 

im so dumb. I just read how the drilling and slotting is not done by brembo. Haven't people had issues with this? Basically you are just drilling and slotting brembo blanks correct?

 

Correct, but we used CNC machine drill to spec. Everything is computerize. Again my supplier been in the business for over 7 years now. And no complantes at all, about the cross drll/slotted nor any others.
Please read carefully next time you order.
Also Brembo do the same thing. They drill it themself using blanks. All cross drill/slotted, dimpled/slotted dimpled only or drill only. All were blank first than drill to spec. As long as the person who drill it do it by the book than nothing will go wrong. If these were ****ty rotors from CHINA i will not sell them. Again these are orignal Brembo rotors, has the Brembo serial number on the side.

I hope that answer your questions. If you have more questions please e-mail me and I will do my best to help

thanks
jason