Bump Bump Bump

 

any news yet, i just put mine on yesterday

 

Just a FYI. I talked with a very reputable distributor. They informed me that Auto Specialty rotors are now made of Chinese Iron which is far inferior. TRW, PowerShot, Auto Specialty, whatever brand you want to call it has been sold to a Chinese company and no longer supplies reputable rotors. This has all happened recently. The distributor said that before the sale of the company the rotors were excellent.

 

Thanks for the input Virus... Very Helpful

I am starting the 2nd round Rotors Group Buy as early as this Weekend. Good News: there is no minimum orders before they can be shipped. Here are the patterns to choose from as a reminder:
http://www.cardomain.com/memberpage/342829/2

Pricing for all Gens:
89-01 Brembo F/R Rotors, any pattern: $250/shipped to 48 states
02-03 Auto Specialty (or Cedric) F/R Rotors any pattern: $240/shipped to 48 States.

Method of payment: Paypal: HenrikGal@Aol.com with full car's info. Rotor's Pattern and you are set to go (allow 1 week before they are ready to be shipped). If you don't have paypal Account please contact me direct for my mailing address for either Cashier's check or Money Order.

Thanks again, Henrik/MaxedUp

 

Henrick. I need 2 fronts only.....whats the cost. I can pick them up.

 

How much to ship the rear one to Canada H1A 2W8 ?

AA

 

Henrik,
what pads do you recommend with these rotors? I'm interested in the straight slotted rotors for my 96 Max. I was thinking about getting Raybestos Quietstop but was wondering if you has any input as to which may perform better with these rotors.

 

Your Price Picked up: $100. Let me know the Pattern and you are set to go (allow 3/4 Days until you can pick em up).

 

$150 shipped to Canada for the rear Pairs.

 

To be honest I am not an experts on brake pads (Any good quality pads will do incl. the 2 you mentioned). My personal all time favorite's (althogh a little more dusty) are AXXISS/PBR "Ultimates" (around $90 F/R set) or less expensive AXXISS Metal Masters (around $70 F/R set).

 

if you could start another gd i would like a set of f/r and zinc plating

 

The 2nd Round Rotor's GB has already started as of today... "No Minimun Orders Required". So, as soon as your car's and Rotor Pattern info is sent via Paypal to: HenrikGal@aol.com you are good to go.
If you dan't have Paypal Account that's O.K. email me please so I sent you my address for cashier's check or Money Order.

*Since these rotors are custome cut to the pattern of your choice, allow about 3-5 working days until they are ready be shipped. Thanks, Henrik

 

[QUOTE=maxed up]The 2nd Round Rotor's GB has already started as of today... "No Minimun Orders Required". So, as soon as your car's and Rotor Pattern info is sent via Paypal to: HenrikGal@aol.com you are good to go.
If you don't have Paypal Account that's O.K. email me please so I sent you my address for cashier's check or Money Order.

*Since these rotors are custome cut to the pattern of your choice: http://www.cardomain.com/memberpage/342829/2 allow about 3-5 working days until they are ready be shipped.

** The color of the rotors are Silverish/Chrom (Not the Godish color you see as a result of bad scan).

*** To speed up your process I would like to stay away from Brake Pads, but if you want me to supply the pads, they will be AXXISS / PBR's ($80/shipped F/R for the "Metal Masters" - $100/shipped F/R for the "Ultimates")

Thanks, Henrik/MaxedUp

 

I'm in just give me a day or so to get the payment ready.

 

Hey Henrik, how much for a set of rear 2k2 rotors:

-For pickup? (Pretty good chance I'll be coming down there again in less than 2 weeks)

-And shipped? (In case I can't make it)

Thanks bro...

 

$100 / Set Picked Up ($130 / Set Shipped).
If you decide to pick up please contact 4-5 Days prior to your arrival so I can get em ready.

 

Thanks Henrick....I will PM you this week. Get me a set of 2NI straight.....I will pick them up next weekend

 

Can you alter your straight slot design, instead of the six slots that you show. Could you do 8 like powerslot, or 8-12 slots going around the rotor, not the star style.

Something like the 1N1 straight without the holes/ cross drilling.

I'm in if you can do that.

 

You can only pick from the patterns available. (Unless you buy 5+ sets so they re-program the system for the custom pattern Design of "your choice").

 

they couldn't just have the machine not drill the holes. Shouldn't be that hard.

The 2N1 straight is the same style as the straight slot without the holes, and the Unload crossdrilled is the same style as the single crossdrilled without a section of holes.

Instead of changing any pattern, see if you can do the 1N1 straight without the holes.

 

O.K....1N1 Straight without the holes are possible.

 

Just ordered your's Kloogy... ready for pick up as of this weekend. Thanks, Henrik

 

Here are some pictures of the autospecialty rotors for a 2002 Maxima. They are waiting on stainless steel lines to be installed. I will be running EBC greenstuff pads on fron and Raybestos PG pads on rear. If the rears suck, I might go back to OEM. Here are some pics.

 

Hey MaxedUp !

I just sent you a PM

 

pm sent......

 

Hey Maxed Up !

YGM , Also Money Sent

 

Money Order Sent!!!!

 

Thanks, I'll place your order as soon as I recieve the M/O

 

Maxed up,

YGM. I confirmed the order

 

Henrick, you got cash and PM !

 

hey i want to know are these real brembos or brembo style? and is the deal still going on?
and can you suggest some pads? let me know thanks really appreaciate it
i got a 2001 max so they have to fit those

 

HENRICK ygm

 

Hey Henrik,

Any update on my order?

 

Your Rotors will either be shipped today or Monday. Thanks

 

89-2001: Brembos, 2K2/2K3" Auto specialty or Cedric. Yes, the deal is still going but I may take a break soon before the end of the month.

Here are some new and bigger pictures of the Patterns still available:
http://www.cardomain.com/memberpage/342829/2

Also if you order 2sets plus (one for yourself - one for a friend... etc.) the Zinc Platting is on me. "No Extra Charge on both sets).
Thanks again: HenrikGal@aol.com

 

[QUOTE Hey Henrik,

Any update on my order?

 

Henrik, what styles are available for 2002?

 

Which is better Zinc or Cadmium plating? And do you offer cadmuim plating?

 

Here are night pics of the rotors I picked up from Henrick today.....look great and feel great too !...I will take some daytime closeups tomorrow...

 

Either one is good and recommended. I personally like the Zinc Plating better because they give the rotors that bright silverish/Chrome look.