can you get a full set of x-drilled and slotted for a 93 Z 2+2 non turbo?...if so I would like to get a set...please let me know, I need them asap.

 

Yes i can still get them


for 2k rotors, we still have some left

same for 2k1 everything is still aviable

2k2's pads, and rotor is not included in the specials

thanks
jason

 

ok how much are they for a set (of 4)?

 

can i get a price quote for:

2 brembo blank rotors for the rear of a '95 maxima
shipped to 61265. thanks.

 

Specials are end now all price are back to normal

thanks =)

aznsap you got p.m

 

For some reason i can't edit my post so here is the price brake down

$100 for Front rotors, Dimpled, slotted, dimpled/slotted cross drill, cross drill/slotted
$100 for rear same thing.

$44 for Brembo blanks each $88 for pair zinc plated
$44 for brembo blanks rear each $88 for pair zinc plated


$35 for Axxis MM/PBR pads Front
$35 for Axxis MM/PBR pads rear

$85 SS lines F/R Technofit (company own by the vice presdent of Goodridge)

everything for year 89-01 maxima

02-03 Is still in process, rougly next week another GD will be up for 02-03 maxima only.
I know i been posting about 02-03 for a while now, but surly next week GD will be up

thanks
jason

 

YGPM.


-Jason

 

I don't have any p.m.
.org is pretty busy, you might want to send it again

 

Hey Jason, do you have any pics of what the dimpled rotors look like? And do you still have the rotors available in slotted or slotted/dimpled?

 

Yeah yeah yeah.... I know the GD is over.... sadly... but still...



YGPM....

 

I should have them on my homepage, you can check it out.

yes I still have everything aviable. Only the price is adjusted.

Dark Lord Bunny

you got p.m

thanks
jason

 

Any info on the 02's yet??

 

WE got the rears but the front aye not yet...

 

Hey, i just happen to be in need of some new rotors since my old ones were warping badly.

Just wondering if you have any more 2k brembo blanks and pads?

 

Yes we still do

 

damn, i missed the GD on this. just wondering how long before you offer another GD on the same rotors/pads/lines. I was thinking about getting the full set.

 

I might need the whole set too

 

Probly in a month, right now everything is short on supply. Your are lucky if you even can get a pair at $100 which is a helllla good price =) once we ran out is out. We heard from a insider that brembo is going to jack up the price later for like $5 extra for each rotor, but his not sure when will it happen.

jason

 

btw guys I have one last set for 2000-2001 rotor BREMBO.

1995-1999 we have 6 set left BREMBO

and one set of 1989-1994 brembo left.



jason

 

p.s and we have about 15 extra pairs of front brembo rotors for 1995-1999 maxima.
It should be gone within a week or 2 and after this, we are getting more on march. Hopfully price won't rise

 

Still have Axxis pads for sale?

 

Yes sir still got them

 

Is the GD still available?

 

Specials are over

all the new pricing is on top of this page

 

You got PM

 

Reply back to you

 

Just got home and find out one of my Dimpled-slotted rotor is shot, ABS light came on this morning while going to work, I could only check when I arrived home tonight. Is it possible to resurface a Dimpled-slotted rotor ? Anyhow how much would it cost me to replace the 4 rotors with good quality one I like the Dimpled slotted so far.

Thanks

AA

 

did you got them from me? Yes you can resurface them without any problem.
All 4 zinc plated brembo dimpled/slotted is $200 + shipping

let me know
thanks
jason

 

Hi Jason, thank for answering, meantime I got stuck with the car, so I just slap on the original oem resurface with new pads, so everything is fine for now but that make me think to review my priority since the Nissan Maxima brake system suck. I think it worth to invest in a complete new brakes systems for this spring. I'd like to go for BB kit ( 2 Pistons should be enough ) with 2 pieces rotor. I have 17" TMW GTV with 42 MM offset and the spoke are flat with the wheel so there is a lot of room, let me know what kit you sell and what kind of deal I can get.

Thank you

AA

 

Man I cant wait to buy these! Next month w00t!

 

i sent you a PM but never heard anything back..

 

Uncood i never got your pm, .org has been acting weird lately

doublea you want the Brembo big brake kit or just the brake package?

$200 for F/R any type of Brembo zinc plated rotors
$70 for Axxis/PBR MM pads
$85 for Full set of Technofit SS lines

let me know
thanks
jason

 

hey bro i pmed you as well i guess u never got it....but i was wondering if you have teh 02 front rotors yet...let me know thanx

-J

 

Yeah me too. Mt brakes are vibrating like a MFer and now my sqeelers are starting to sing! PLEASE HELP!!

 

Sorry 02-03 guys i only have the rear for you guys

 

Hi Jason, I want to go with the BB. Brembo, Wildwood, or AP or whatever I can afford, since I already have the Zinc Plated the SS brake line and Axxis pads, with the kind of winter we got here the Zinc plated are already rusted, and the Nissan caliper are all rusted and a piston was jam so I'm going to use the taxe return for the BB kit, but I want for the 4 wheels how much would that run me, 2k1 Maxima.

Thank brother

AA

 

what kind of payments do you accept?

-Jason

 

Jason --

Got my product today -- THANKS!!!

Have to give Jason props for exemplifying GREAT
customer service when he shipped my product to
me -- AT HIS EXPENSE -- because FedEx screwed
up the shipment...I saw how much it cost, and it
wasn't cheap -- A1 CLASS MOVE!!!

nice one!
FLO_BOY

 

Thx George =)
Can you please leave me a feedback here
http://forums.maxima.org/showthread.php?t=261307

Uncood
I accept Money order or Paypal

Doublea
I'll check on Brembo, Wilwood for you, I let you know on Monday.
thanks
jason

 

AuToMaX_95, do you guys carry the Powerslot Rotors. Prefferably, the Pro Stop II. If so I'd like to buy them.