95/96 red/clears
 

I am talking with a guy from Australia about making red clear lenses for our taillights. So you would have to take apart your current tailights and put in the new lense. He said we would need at least 10 orders but I haven't received a price from him yet. I just want to see if there would be 10 people that would be interested. I'm in so that makes 9 more. As soon as I get a price I will post it. I told him the demand will depend on the price so hopefully he'll respond soon.

i hope it all goes well for you....

i believe that someone out there can make these & it will happen but until then all you're going to get is.........it's never gonna happen......

Good Luck.
Sam

if by some chance it does happen though... depending on the price, ide get one

i'd get em if they were cheap enough.

me toooo however i think we would need pics of a prototype first,ive seen some horrid jobs on red/clears

there are about 1000 org members who will buy them, there is no question about the demand, can you get them made is the true question

I'm definitely in as long as the price is right

Ya, worry about getting them.

Im interested.

Im in, where they at? :P Trust me theres more than enough demand like the above post said...

I wnat to see a proto pic before i put any money down.

Also make sure this is legit cause if this guy beats us theres no way we can get any of our money back!!

Don't worry there is no done deal or anything yet. I hope he will make something of it but only time will tell. I'll make sure to update everyone on everything as I get info in. Here is his website. www.tailights.com
They look like they do excellent work. It's just a little difficult making contact with them seeing as they are in australia in a different time zone. I'll do the best I can to try and make this happen and hopefully for a low price. But I won't present a done deal until I know all info and am confident working with them.

im definitely in...!!!

are you kidding?? you will get hundreds of people on the board who will want these! some guys I talk to would almost kill for 'em!

IM IN If they are a fair price that is....

That is the problem with 95-96 tail lights, you cannot take apart the inner orange lense out, it is a single piece. If that was the case then we would be doing the same red/clear DIY mod as the 97-99. Sad to say it will take a new outer tailights to pull off the red/clear look. The only way to keep your current outer tailights would be to cut out the orange section completely out (which would expose the bulb) then fuse a new piece where you had cut.

while I am not crazy about having to put my tail lights in the oven, it would be great if this company could provide just the lenses in red/clear and the adhesive. This way the costs should be much lower. They could make the red/clear lenses and we could use our stock housings. If this company lives up to their advertising they should be able to make a copy of out red/ambers lens but in red/clear. All we really need is a red/clear lens that we could reassemble to the stock housing. No?

I know the amber is attached to the red. I was saying you would take off the red/amber lense shell and put on the red/clear lense shell. What I am trying to get made is the RED/CLEAR LENSE. So hopefully it will be a cheap price.

get a good copy lens of our OEM red/amber in red/clear and you will sell them like hotcakes.

that would be a good idea. i am in if price and quality is good and i also want to see a prototype first.

$75, no more! LOL



good luck

I'd be in...

I'm IN......

woow so its a site and everything, im in as long as its under 100$$

I am definatly interested.. If the price is right...

count me in!!!!

i thought you wouldnt tell anyone what i would do for a pair :wall:

if this ever happens, im definitely in for these

I'm in if the price is right. Definitely a market for this here on the ORG.

Baking my lights isn't something that I'm too keen on...

A good quality whole assembly at a good price (less than $200 range) would be a HUGE seller.

If it's just the lenses, again, it would depend on the price.

If this can be pulled off, the Aussies wouldn't be able to make them fast enough!

Count me in if they are exact fit and come in 95/96.

If you get these i will buy all 10 from you...then sell to the orgerz for tripple the price MUAAHAHAHAHA MUAHAHAHAAAAA

NA...im not that messed up, but i would REALLY love a pair..

i'd be in as long as its under $100

i'd be in too

other than that count me in 2..

I'm in but.... never gunna happen :rolleyes:

whats the status on this? any good news?

i'm in after i see a prototype and someone makes shure that it fits right :thumbsup:

that does look like a rather reputable site though, i wonder if we can get them to make other stuff for us...

:slap: 97-99 red/clears cost around $140 and you can get them in many places.....

Ok, this is nothing official or anything, but I just wanted to make it organize, to give every one here a good idea of the number of peole intersted.
I know many of you said, "Ohh for the right price i'm in.." or "I need to see the picture first..." but all I did was gather everyones name and put in a list. (if you eventualy decide not to buy (if they come out) then there will be a official list where you will put your name down.

1 hacim105
2 blackmaxx96
3 LudeAEM
4 mungrin
5 waveridr85
6 Max_PR
7 big_al
8 Turbo1er
9 s0ber
10 maxspeed96CT
11 michaelnyden
12 Zipp028
13 Street Reeper
14 MAXIMARK
15 vsamoylov
16 nadir_s
17 RyCrisp
18 PeTeRtheEaTeR
19 shnoog
20 XIMA96SE
21 -=PK=-Maxima
22 eckohb
23 MyGray96SE
24 tcf_dk
25 XeroX
26 polishpunk68
27 Cino
28 Shift_my vq
29 007max
30 guinader
31 ICanEat123
32 craig10114


Funny right now we already have 30+ people, again if I forgot any one just replay to my post and fix it...

Cool thanks. The guy is being difficult to get in touch with. Too bad I'm not in Australia right now. Anyway I'll email with our new list of 30 people and maybe he'll be more inclined to keep in touch a little better.