Still looking for a New Warpspeed Ypipe? It's still $160 shipped!!
05-25-2004, 02:29 PM
#42
Senior Member
Join Date: May 2003
Location: Boston, MA
Posts: 977
Hey, I may be getting in on this. When is the deadline to the deal? How late are they accepting money?
05-26-2004, 08:02 AM
#43
Originally Posted by R5a7B
Hey, I may be getting in on this. When is the deadline to the deal? How late are they accepting money?
05-26-2004, 11:55 AM
#45
Originally Posted by Pizzaman
awww **** am i to late for this?
I finally got the response from Dallas...
From: <dallaswarpspeed@sbcglobal.net>
To: "Tony Taing" <tonytaing@comcast.net>
References: <000501c442c7$bd156e80$c83c0418@pauly>
Subject: Re: still stirring a lot of interest
Date: Wed, 26 May 2004 14:31:29 -0500
Tony:
If you would like to post on the ORG that would be fine, we'll do the =
same price $160 delivered for Y pipes 1989-2001, add a cat for $85.
We'll keep it open for a couple of weeks. If may take several weeks for =
them to receive their pipe but they can call in and give their info.
regards
Dallas
To: "Tony Taing" <tonytaing@comcast.net>
References: <000501c442c7$bd156e80$c83c0418@pauly>
Subject: Re: still stirring a lot of interest
Date: Wed, 26 May 2004 14:31:29 -0500
Tony:
If you would like to post on the ORG that would be fine, we'll do the =
same price $160 delivered for Y pipes 1989-2001, add a cat for $85.
We'll keep it open for a couple of weeks. If may take several weeks for =
them to receive their pipe but they can call in and give their info.
regards
Dallas
05-26-2004, 11:10 PM
#47
Originally Posted by zx2max
i would like to get in on this deal, but when do i have to send the money? Payday isnt until next friday.
I want in. 89 Maxima.
05-27-2004, 12:24 PM
#48
Banned
Join Date: Nov 2003
Posts: 141
I'm in if it is still good to go.. for my 96 GXE 5 spd. for the us model non- cali y-pipe only no cat plz..
05-29-2004, 11:13 AM
#50
so... even though I sent you all my info, i still need to call them and give them that? or do I just need to confirm payment and shipping options? might you be able to give me a little more insight on to what i need to do?
05-29-2004, 02:02 PM
#51
Senior Member
Join Date: Jun 2003
Posts: 441
Originally Posted by mel6822
I will need you full name, address, phone # and email address. I will CC you when I send our list to Warpspeed. You can then contact them directly to confirm you order and arrange payment.
Here is the revised list so far...
Please send me your contact information if you haven't already done so. I will CC everyone when I send Warpspeed our list. You can then contact them directly to confirm your order(s) and arrange payment. For those that do not get in on time, I will ask Dallas to see when he would like to set a deadline for you.
Thanks
Tony
Here is the revised list so far...
- mel6822 - 99SE, FED EMISSION
- chowdude - 89SE
- DCM Maxima - 96GLE
- Nazca - 99GLE, CA EMISSION
- TooEasy - 90SE
- tsaulz - 96SE
- Maxima Dan - 01SE
- ludacris - 98SE
- eckohb - 97SE
- kpby911 - ?SE
- maximadoc - 96GXE
- BlackBIRDVQ - 01GXE
- 99maxx-on19's - 99GXE ~ need to know FED or CA EMISSION
- Tjd135 - 95SE
Please send me your contact information if you haven't already done so. I will CC everyone when I send Warpspeed our list. You can then contact them directly to confirm your order(s) and arrange payment. For those that do not get in on time, I will ask Dallas to see when he would like to set a deadline for you.
Thanks
Tony
05-30-2004, 06:48 AM
#52
Originally Posted by antonthegrey
so... even though I sent you all my info, i still need to call them and give them that? or do I just need to confirm payment and shipping options? might you be able to give me a little more insight on to what i need to do?
05-30-2004, 06:53 AM
#53
Originally Posted by 99maxx-on19's
I'm F E D and i'm going to call wsp to let them know i will have my money on friday.Will they be shipping as soon as they get the payments???
05-30-2004, 12:44 PM
#54
Member
Join Date: Apr 2003
Posts: 97
Is there an group deal option for the y pipe and resonated b pipe?
05-31-2004, 02:22 PM
#55
Junior Member
Join Date: Feb 2004
Posts: 19
I'm in for just the Y-pipe. Do I still need to send you my info Mel or just Warpspeed? If you need my info, what all do you need to know?
05-31-2004, 08:01 PM
#57
Originally Posted by divisions
Is there an group deal option for the y pipe and resonated b pipe?
Thanks
Tony
06-01-2004, 03:01 PM
#58
Senior Member
Join Date: May 2003
Location: Boston, MA
Posts: 977
How much hp gain with:
y pipe?
cat?
cat and ypipe together?
y pipe?
cat?
cat and ypipe together?
06-03-2004, 08:38 AM
#59
Supporting Maxima.org Member
Join Date: Apr 2002
Posts: 28
GD still on if anybody else interested...
I saw this Group Deal thread and contacted Dallas (of WarpSpeed) directly. He offered the Group Deal price to me and now, I got one coming...wooohooo!
For anyone interested in this GREAT DEAL, contact Dallas directly and update this thread.
Here is part of Dallas' latest response to me:
"We'll probably continue the group buy for a few more weeks. No idea so far as to how many, 20 or so I guess. We'll keep cranking them out as long as there is interest."
For anyone interested in this GREAT DEAL, contact Dallas directly and update this thread.
Here is part of Dallas' latest response to me:
"We'll probably continue the group buy for a few more weeks. No idea so far as to how many, 20 or so I guess. We'll keep cranking them out as long as there is interest."
06-04-2004, 04:28 PM
#60
Senior Member
Join Date: Jun 2003
Posts: 441
Originally Posted by R5a7B
How much hp gain with:
y pipe?
cat?
cat and ypipe together?
y pipe?
cat?
cat and ypipe together?
06-07-2004, 09:43 AM
#62
Originally Posted by Ludacris
Has anyone gotten any info from Warpspeed since ordering?
06-07-2004, 09:44 AM
#63
Supporting Maxima.org Member
Join Date: Oct 2000
Posts: 284
We'll hold the price until July1.
We'll hold the price until July 1, 2004. Remember to ask for it as it's only good for Maxima.org members.
It is the same models as last time (1989-2001 Maxima's) and includes the same pricing for aluminized steel Y pipes and cats as well. If you have a question just call Lynne toll free 866-801-9338.
I'll be a bit hard to get a hold of as we are doing dirt work and prepping the slabs for our new shop buildings but we have three people working on pipes and such so there should not be too bad of a wait. I know we have shipped some already.
As always gaskets and fasteners are included.
We may add some 2002 and 2003 Y pipes late this month, we'll have the usual 2-1/2" collector or a 2-1/4" version in case like Cat*man you believe smaller is better.
regards
Dallas
It is the same models as last time (1989-2001 Maxima's) and includes the same pricing for aluminized steel Y pipes and cats as well. If you have a question just call Lynne toll free 866-801-9338.
I'll be a bit hard to get a hold of as we are doing dirt work and prepping the slabs for our new shop buildings but we have three people working on pipes and such so there should not be too bad of a wait. I know we have shipped some already.
As always gaskets and fasteners are included.
We may add some 2002 and 2003 Y pipes late this month, we'll have the usual 2-1/2" collector or a 2-1/4" version in case like Cat*man you believe smaller is better.
regards
Dallas
06-07-2004, 09:47 AM
#64
Originally Posted by bmfjeep
We'll hold the price until July 1, 2004. Remember to ask for it as it's only good for Maxima.org members.
It is the same models as last time (1989-2001 Maxima's) and includes the same pricing for aluminized steel Y pipes and cats as well. If you have a question just call Lynne toll free 866-801-9338.
I'll be a bit hard to get a hold of as we are doing dirt work and prepping the slabs for our new shop buildings but we have three people working on pipes and such so there should not be too bad of a wait. I know we have shipped some already.
As always gaskets and fasteners are included.
We may add some 2002 and 2003 Y pipes late this month, we'll have the usual 2-1/2" collector or a 2-1/4" version in case like Cat*man you believe smaller is better.
regards
Dallas
It is the same models as last time (1989-2001 Maxima's) and includes the same pricing for aluminized steel Y pipes and cats as well. If you have a question just call Lynne toll free 866-801-9338.
I'll be a bit hard to get a hold of as we are doing dirt work and prepping the slabs for our new shop buildings but we have three people working on pipes and such so there should not be too bad of a wait. I know we have shipped some already.
As always gaskets and fasteners are included.
We may add some 2002 and 2003 Y pipes late this month, we'll have the usual 2-1/2" collector or a 2-1/4" version in case like Cat*man you believe smaller is better.
regards
Dallas
06-07-2004, 03:56 PM
#65
Senior Member
Join Date: May 2003
Location: Boston, MA
Posts: 977
So we can just call them and pay on the phone and give them our adress? Or do we have to go through the org first?
06-07-2004, 05:34 PM
#66
Originally Posted by R5a7B
So we can just call them and pay on the phone and give them our adress? Or do we have to go through the org first?
06-10-2004, 02:37 PM
#67
Senior Member
Join Date: May 2003
Location: Boston, MA
Posts: 977
Do you need to get oxygen sensors with the pipe also?
06-10-2004, 08:17 PM
#68
Originally Posted by R5a7B
Do you need to get oxygen sensors with the pipe also?
06-10-2004, 08:17 PM
#69
Originally Posted by R5a7B
Do you need to get oxygen sensors with the pipe also?
06-11-2004, 12:00 PM
#70
Senior Member
Join Date: May 2003
Location: Boston, MA
Posts: 977
I'm at 151k... So I suppose I should be replacing them.
How much do they normally run for?
How much do they normally run for?
06-11-2004, 01:04 PM
#71
Originally Posted by R5a7B
I'm at 151k... So I suppose I should be replacing them.
How much do they normally run for?
How much do they normally run for?
06-11-2004, 06:05 PM
#72
Senior Member
Join Date: Jun 2003
Posts: 441
Just so you guys know.I called monday and gave my cc # and info and recived mine in today! I was expecting atleast 2 weeks but no not even a week! thanks me6822 and WSP.
P.S. i think i got it early cuz it came from dallas and im in houston?
P.S. i think i got it early cuz it came from dallas and im in houston?
06-11-2004, 07:39 PM
#74
Senior Member
Join Date: May 2003
Location: Boston, MA
Posts: 977
Originally Posted by mel6822
As I stated above that's entirely up to you. I'm replacing mine as preventative maintenance and hoping that it'll increase fuel economy. I paid ~$60 each through GD - if you search under the GD section you'll find the thread. Hope that helps.
06-12-2004, 08:14 AM
#76
Junior Member
Join Date: May 2004
Posts: 22
Just got mine today via Fedex....Just need to install now....Thanks for the great GD
06-15-2004, 01:02 PM
#79
Supporting Maxima.org Member
Join Date: Apr 2002
Posts: 28
I received mine 4 days ago. I'm now recording my 0-60 and 1/4 mile times before I get the y-pipe installed. I want to see how much performance gains I'll get after its installed.
06-15-2004, 09:50 PM
#80
Newbie - Just Registered
Join Date: May 2004
Posts: 1
Are They Going To Have The Group Deal On The Y-pipe Again Cuz I Miss This One And I Want To Get In On The Deal